advertisement
Build a security application
The Administrator can use the built-in motion detection to monitor any movement to perform many useful security applications. To upload the snapshots, users can choose either email or FTP according to user’s needs. Both e-mail and FTP use the network settings on the Email and FTP page. Refer to the definition section for detail configuration.
1. Click on “Configuration” on homepage,
2. Click on “Motion detection” at the left column,
3. Check “Enable motion detection”,
4. Click on new to have a new window to monitor video,
5. Type in a name to identify the new window,
6. Use the mouse to click, hold, and drag the window corner to resize or the title bar to move,
7. Fine-tune using the “Sensitivity” and “Percentage” fields to best suit the camera’s environment. Higher ”Sensitivity” detects the slighter motion. Higher “Percentage” discriminates smaller objects,
8. Clicking on “Save” enables the activity display. Green means the motion in the window is under the watermark set by Administrator and red means it is over the watermark,
9. Click on “Application” at the left column,
10.Check the weekdays as you need and give the time interval to monitor the motion detection every day,
11.Select the Trigger on Motion detection.
12.Set the delay before detecting next motion to avoid continuous false alarms following the original event,
13.Set the number of pre-event and post-event images to be uploaded,
14.Check the window name set in step 5,
15.Check the way to upload snapshot,
16.Click on save to validate.
- 22 -
advertisement
Related manuals
advertisement
Table of contents
- 3 Before You Use This Product
- 7 Package Content
- 8 Installation
- 8 Hardware installation
- 9 Software installation
- 9 Initial Access to the IP Camera
- 9 Check Network Settings
- 10 Add Password to prevent Unauthorized Access
- 10 How to Use
- 10 Authentication
- 11 Installing plug-in
- 13 Primary user’s capability
- 13 Main Screen with Camera View
- 14 Digital Zoom
- 14 Snapshot
- 15 Client settings
- 17 Digital output
- 17 Administrator’s capability
- 17 Fine-tuning for Best Performance
- 20 Opening accounts for new users
- 22 Build a security application
- 23 Software revision upgrade
- 24 Definitions in Configuration
- 26 System parameters
- 27 Security settings
- 28 Network settings
- 28 Network type
- 29 RTSP Streaming
- 33 Access List
- 34 Audio and Video
- 34 Video Settings
- 34 Video orientation
- 34 Audio settings
- 37 Image Settings
- 39 Email & FTP
- 39 Email
- 42 Motion detection
- 43 Application settings
- 43 Application
- 43 Snapshot
- 44 Weekly schedule
- 44 Snapshot file name prefix
- 44 Digital input
- 44 Send out the snapshot while motion detection
- 44 Sequential operation
- 45 Method for sending snapshot
- 47 Video clip
- 47 Weekly schedule
- 47 Video clip file name prefix
- 47 Video clip max file size
- 47 Digital input
- 47 Send out the video clip while motion detection
- 48 Sequential operation
- 48 Method for sending snapshot
- 50 Digital output
- 50 Weekly schedule
- 50 Digital input
- 50 Trigger digital output while motion detection
- 52 System log
- 53 Viewing system parameters
- 55 Maintenance
- 56 Appendix
- 56 A. Troubleshooting
- 56 Status LED
- 56 Reset and restore
- 57 B. URL commands of the IP Camera
- 57 Get server parameter values
- 58 Set server parameter values
- 59 Available parameters on the server
- 69 Application page CGI command
- 71 Capture single snapshot
- 71 Account management
- 72 System logs
- 73 Configuration file
- 73 Upgrade firmware
- 75 C. Technical specifications