advertisement
Email & FTP
When the SMTP server support SMTP authentication, users need to give the valid user name and password to send email via the server.
“Sender email address”, the email address of the sender.
There are two external mail server can be configured, primary and secondary email server, The IP camera will use primary server as default , and use secondary server when primary server is unreachable.
“Server address” The domain name or IP address of the external email server.
“User name” This granted user name on the external email server.
“Password” This granted password on the external email server.
“Recipient email address” The email address of the recipients for snapshots or log file. Multiple recipients must be separated by semicolon, ‘;’.
FTP
“Built-in FTP server port number” This can be other than the default port 21. The user can change this value from 1025 to 65535. After the changed, the external FTP client program must change the server port of connection accordingly.
There are two external FTP server can be configured, primary and secondary FTP server,
The IP camera will use primary server as default , and use secondary server when primary server is unreachable.
“Server address” The domain name or the IP address of the external FTP server. The following user settings must be correctly configured for remote access.
“FTP server port” This can be other than the default port 21. The user can change this value from 1025 to 65535.
- 39 -
“User name” Granted user name on the external FTP server.
“Password” Granted password on the external FTP server.
“Remote folder name” Granted folder on the external FTP server. The string must conform to that of the external FTP server. Some FTP servers cannot accept preceding slash symbol before the path without virtual path mapping. Refer to the instructions for the external FTP server for details. The folder privilege must be open for upload.
- 40 -
<url>
http://<IP Camera>/setup/mailftp.html
<IP Camera> is the domain name or original IP address of the IP Camera.
- 41 -
advertisement
Related manuals
advertisement
Table of contents
- 3 Before You Use This Product
- 7 Package Content
- 8 Installation
- 8 Hardware installation
- 9 Software installation
- 9 Initial Access to the IP Camera
- 9 Check Network Settings
- 10 Add Password to prevent Unauthorized Access
- 10 How to Use
- 10 Authentication
- 11 Installing plug-in
- 13 Primary user’s capability
- 13 Main Screen with Camera View
- 14 Digital Zoom
- 14 Snapshot
- 15 Client settings
- 17 Digital output
- 17 Administrator’s capability
- 17 Fine-tuning for Best Performance
- 20 Opening accounts for new users
- 22 Build a security application
- 23 Software revision upgrade
- 24 Definitions in Configuration
- 26 System parameters
- 27 Security settings
- 28 Network settings
- 28 Network type
- 29 RTSP Streaming
- 33 Access List
- 34 Audio and Video
- 34 Video Settings
- 34 Video orientation
- 34 Audio settings
- 37 Image Settings
- 39 Email & FTP
- 39 Email
- 42 Motion detection
- 43 Application settings
- 43 Application
- 43 Snapshot
- 44 Weekly schedule
- 44 Snapshot file name prefix
- 44 Digital input
- 44 Send out the snapshot while motion detection
- 44 Sequential operation
- 45 Method for sending snapshot
- 47 Video clip
- 47 Weekly schedule
- 47 Video clip file name prefix
- 47 Video clip max file size
- 47 Digital input
- 47 Send out the video clip while motion detection
- 48 Sequential operation
- 48 Method for sending snapshot
- 50 Digital output
- 50 Weekly schedule
- 50 Digital input
- 50 Trigger digital output while motion detection
- 52 System log
- 53 Viewing system parameters
- 55 Maintenance
- 56 Appendix
- 56 A. Troubleshooting
- 56 Status LED
- 56 Reset and restore
- 57 B. URL commands of the IP Camera
- 57 Get server parameter values
- 58 Set server parameter values
- 59 Available parameters on the server
- 69 Application page CGI command
- 71 Capture single snapshot
- 71 Account management
- 72 System logs
- 73 Configuration file
- 73 Upgrade firmware
- 75 C. Technical specifications