advertisement
Digital output
“Enable digital output” Enable/Disable digital output application.
Weekly schedule
“Sun” ~ “Sat” Select the days of the week to perform the application.
Select “Always” or input the time interval.
Digital input
IP Camera will trigger digital output when the digital input is triggered.
Trigger digital output while motion detection
There are three windows for motion detection each can be assigned a name. Select the windows which need to be monitored. If motion detection has not been set up,
“undefined” will be shown instead of the window title. If this happens, clicking on
“Motion detection” and a note will show to direct the User to the configuration page for motion detection.
“Delay second(s) before detecting next event” Set the time delay before restarting to check on the triggering condition when the current condition is triggered.
- 50 -
- 51 -
advertisement
Related manuals
advertisement
Table of contents
- 3 Before You Use This Product
- 7 Package Content
- 8 Installation
- 8 Hardware installation
- 9 Software installation
- 9 Initial Access to the IP Camera
- 9 Check Network Settings
- 10 Add Password to prevent Unauthorized Access
- 10 How to Use
- 10 Authentication
- 11 Installing plug-in
- 13 Primary user’s capability
- 13 Main Screen with Camera View
- 14 Digital Zoom
- 14 Snapshot
- 15 Client settings
- 17 Digital output
- 17 Administrator’s capability
- 17 Fine-tuning for Best Performance
- 20 Opening accounts for new users
- 22 Build a security application
- 23 Software revision upgrade
- 24 Definitions in Configuration
- 26 System parameters
- 27 Security settings
- 28 Network settings
- 28 Network type
- 29 RTSP Streaming
- 33 Access List
- 34 Audio and Video
- 34 Video Settings
- 34 Video orientation
- 34 Audio settings
- 37 Image Settings
- 39 Email & FTP
- 39 Email
- 42 Motion detection
- 43 Application settings
- 43 Application
- 43 Snapshot
- 44 Weekly schedule
- 44 Snapshot file name prefix
- 44 Digital input
- 44 Send out the snapshot while motion detection
- 44 Sequential operation
- 45 Method for sending snapshot
- 47 Video clip
- 47 Weekly schedule
- 47 Video clip file name prefix
- 47 Video clip max file size
- 47 Digital input
- 47 Send out the video clip while motion detection
- 48 Sequential operation
- 48 Method for sending snapshot
- 50 Digital output
- 50 Weekly schedule
- 50 Digital input
- 50 Trigger digital output while motion detection
- 52 System log
- 53 Viewing system parameters
- 55 Maintenance
- 56 Appendix
- 56 A. Troubleshooting
- 56 Status LED
- 56 Reset and restore
- 57 B. URL commands of the IP Camera
- 57 Get server parameter values
- 58 Set server parameter values
- 59 Available parameters on the server
- 69 Application page CGI command
- 71 Capture single snapshot
- 71 Account management
- 72 System logs
- 73 Configuration file
- 73 Upgrade firmware
- 75 C. Technical specifications