"provisioning" Module: Provisioning Settings. VTech VSP600, ErisTerminalVSP600, VSP601
Add to my manuals
119 Pages
advertisement
VSP600 Administrator and Provisioning Manual
"provisioning" Module: Provisioning Settings
The provisioning settings follow the format: provisioning.[element].
All these settings are exported when you manually export the configuration from the
VSP600.
All the provisioning settings are included in the general configuration file.
Setting: provisioning.firmware_url
Description:
Sets the URL for the server hosting the firmware file.
Values:
Text string
Default:
Blank
Setting: provisioning.handset_firmware_url
Description:
Sets the URL for the server hosting the handset firmware file.
Values:
Text string
Default:
Blank
Setting: provisioning.fw_server_username
Description:
Sets the authentication name for the server hosting the firmware file.
Values:
Text string
Default:
Blank
Setting: provisioning.fw_server_password
Description:
Sets the authentication password for the server hosting the firmware file.
Values:
Text string
Default:
Blank
Setting: provisioning.server_address
Description:
Sets the provisioning server IP address.
Values:
Text string
Default:
http://et.vtechphones.com/
redirectserver
Setting: provisioning.server_username
Description:
Sets the authentication name for the provisioning server.
Values:
Text string
Default:
Blank
Configuration File Parameter Guide 93
VSP600 Administrator and Provisioning Manual
Setting: provisioning.server_password
Description:
Sets the authentication password for the provisioning server.
Values:
Text string
Default:
Blank
Setting: provisioning.dhcp_option_enable
Description:
Enables or disables using DHCP options for locating the configuration and firmware files.
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting: provisioning.dhcp_option_priority_1
Description:
Sets the first priority DHCP option for the provisioning/firmware file check.
Values:
66, 159, 160
Default:
66
Setting: provisioning.dhcp_option_priority_2
Description:
Sets the second priority DHCP option for the provisioning/firmware file check.
Values:
66, 159, 160
Default:
159
Setting: provisioning.dhcp_option_priority_3
Description:
Sets the third priority DHCP option for the provisioning/firmware file check.
Values:
66, 159, 160
Default:
160
Setting: provisioning.resync_mode
Description:
Sets the mode of the device's provisioning/firmware file check. This determines which files the device retrieves when the resync process begins.
Values:
config_only, firmware_only,
Default:
config_and_firmware config_and_firmware
Setting: provisioning.bootup_check_enable
Description:
Enables or disables bootup check for configuration and firmware files.
Values:
0 (disabled), 1 (enabled)
Default:
1
Configuration File Parameter Guide 94
VSP600 Administrator and Provisioning Manual
Setting: provisioning.resync_time
Description:
Sets the interval (in minutes) between checks for new firmware and/or configuration files.
Values:
0–65535
Default:
0 (OFF)
Setting: provisioning.remote_check_sync_enable
Description:
Enables or disables remotely triggering the device to check for new firmware and/or configuration files. The file checking is triggered remotely via a SIP
Notify message from the server containing the check-sync event.
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting: provisioning.crypto_enable
Description:
Enables or disables encryption check for the configuration file(s). Enable if you have encrypted the configuration file(s) using AES encryption.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting: provisioning.crypto_passphrase
Description:
Sets the AES encryption passphrase for decrypting the configuration file(s). Enter the key that was generated when you encrypted the file.
Values:
Text string
Default:
Blank
Setting: provisioning.check_trusted_certificate
Description:
Enables or disables accepting only a trusted TLS certificate for access to the provisioning server.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting: provisioning.pnp_enable
Description:
Enables or disables the VSP600 checking for the provisioning URL using the Plug-and-Play Subscribe and Notify protocol.
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting: provisioning.pnp_response_timeout
Description:
Sets how long the VSP600 repeats the SUBSCRIBE request if there is no reply from the PnP server.
Values:
1–60
Default:
10
Configuration File Parameter Guide 95
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement