"remoteDir" Module: Remote Directory Settings. VTech VSP600, ErisTerminalVSP600, VSP601
Add to my manuals
119 Pages
advertisement
VSP600 Administrator and Provisioning Manual
"remoteDir" Module: Remote Directory Settings
The remote directory settings follow the format: remoteDir.[element].
All these settings are exported when you manually export the configuration from the
VSP600.
All the remote directory settings are included in the general configuration file.
Setting: remoteDir.ldap_enable
Description:
Enables or disables the VSP600 base station's access to the LDAP directory.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting: remoteDir.ldap_directory_name
Description:
Sets the LDAP directory name.
Values:
Text string
Default:
Blank
Setting: remoteDir.ldap_server_address
Description:
Sets the LDAP server IP address.
Values:
Text string
Default:
Setting: remoteDir.ldap_port
Description:
Sets the LDAP server port.
Values:
1–65535
Default:
Blank
389
Setting: remoteDir.ldap_protocol_version
Description:
Sets the LDAP protocol version.
Values:
version_2, version_3
Default:
version_3
Setting: remoteDir.ldap_authentication_type
Description:
Sets the LDAP authentication type.
Values:
simple, ssl
Default:
simple
Configuration File Parameter Guide 101
VSP600 Administrator and Provisioning Manual
Setting: remoteDir.ldap_user_name
Description:
Sets the LDAP authentication user name.
Values:
Text string
Default:
Blank
Setting: remoteDir.ldap_password
Description:
Sets the LDAP authentication password.
Values:
Text string
Default:
Blank
Setting: remoteDir.ldap_base
Description:
Sets the LDAP search base. This sets where the search begins in the directory tree structure. Enter one or more attribute definitions, separated by commas (no spaces). Your directory may include attributes like "cn"
(common name) or "ou" (organizational unit) or "dc" (domain component). For example, ou=accounting,dc=vtech,dc=com
Values:
Text string
Default:
Blank
Setting: remoteDir.ldap_max_hits
Description:
Sets the maximum number of entries returned for an LDAP search.
Limiting the number of hits can conserve network bandwidth.
Values:
0–32000
Default:
200
Setting: remoteDir.ldap_search_delay
Description:
Sets the LDAP maximum search delay in seconds.
Values:
0–500
Default:
0
Setting: remoteDir.ldap_firstname_filter
Description:
Sets the LDAP first name attribute filter.
Values:
Text string
Default:
Firstname
Setting: remoteDir.ldap_lastname_filter
Description:
Sets the LDAP last name attribute filter.
Values:
Text string
Default:
Lastname
Configuration File Parameter Guide 102
VSP600 Administrator and Provisioning Manual
Setting: remoteDir.ldap_number_filter
Description:
Sets the LDAP number filter.
Values:
Text string
Default:
Blank
Setting: remoteDir.ldap_firstname_attribute
Description:
Sets the name attributes. Enter the name attributes that you want the
VSP600 to display for each entry returned after an LDAP search.
Separate each attribute with a space. For example, givenName sn will display the first name and surname for each entry.
Values:
Text string
Default:
Blank
Setting: remoteDir.ldap_lastname_attribute
Description:
Sets the last name attributes.
Values:
Text string
Default:
Blank
Setting: remoteDir.ldap_work_number_attributes
Description:
Sets the number attributes. Enter the number attributes that you want the
VSP600 to display for each entry returned after an LDAP search.
Separate each attribute with a space. For example, telephoneNumber mobile will display the work phone number and mobile phone number for each entry.
Values:
Text string
Default:
Blank
Setting: remoteDir.ldap_mobile_number_attributes
Description:
Sets the mobile number attributes.
Values:
Text string
Default:
Blank
Setting: remoteDir.ldap_other_number_attributes
Description:
Sets the “other” number attributes.
Values:
Text string
Default:
Blank
Configuration File Parameter Guide 103
VSP600 Administrator and Provisioning Manual
Setting: remoteDir.ldap_incall_lookup_enable
Description:
Enables or disables LDAP incoming call lookup. If enabled, the VSP600 searches the LDAP directory for the incoming call number. If the number is found, the VSP600 uses the LDAP entry for CID info.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting: remoteDir.ldap_outcall_lookup_enable
Description:
Enables or disables LDAP outgoing call lookup. If enabled, numbers entered in pre-dial or live dial are matched against LDAP entries. If a match is found, the LDAP entry is displayed for dialing.
Values:
0 (disabled), 1 (enabled)
Default:
0
Configuration File Parameter Guide 104
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 Preface
- 7 Text Conventions
- 7 Audience
- 7 Related Documents
- 8 Introducing the VSP
- 9 About the VSP600 base station
- 10 Quick Reference Guide
- 12 Network Requirements
- 13 VSP600 Configuration Methods
- 14 Configuration Using the Phone Menus
- 15 Viewing the Main Menu
- 15 Using the Status menu
- 17 Viewing Line status
- 18 Using the Admin Settings Menu
- 19 Using the Network Setting menu
- 22 Using the Provisioning menu
- 23 Editing the handset PIN code
- 24 Using the WebUI
- 25 Using the Web User Interface (WebUI)
- 27 Saving your settings
- 28 Status Page
- 28 System Status
- 29 Handset Status
- 30 System Pages
- 30 SIP Account Management
- 30 General Account Settings
- 32 Dial Plan
- 33 SIP Server Settings
- 33 Registration Settings
- 33 Outbound Proxy Settings
- 33 Backup Outbound Proxy Settings
- 34 Audio Settings
- 34 Quality of Service
- 35 Signaling Settings
- 35 Feature Access Codes Settings
- 36 Voicemail Settings
- 37 NAT Traversal
- 38 Music on Hold Settings
- 38 Network Conference Settings
- 38 Session Timer
- 39 Call Settings
- 39 General Call Settings
- 39 Do Not Disturb
- 40 Call Forward
- 41 User Preferences
- 41 General User Settings
- 42 Signaling Settings
- 42 Voice
- 42 NAT Traversal
- 43 Handset Settings
- 43 Account Assignments
- 44 Handset Name
- 45 Network Pages
- 45 Basic Network Settings
- 46 Advanced Network Settings
- 47 LLDP-MED
- 47 802.1x
- 48 Contacts Pages
- 48 Base Directory
- 50 Create Base Directory Entry
- 50 Directory Import/Export
- 51 Blacklist
- 52 Create Blacklist Entry
- 53 Blacklist Import/Export
- 54 Servicing Pages
- 54 Reboot
- 54 Time and Date
- 55 Time and Date Format
- 55 Network Time Settings
- 55 Time Zone and Daylight Savings Settings
- 56 Manual Time Settings
- 57 Firmware Upgrade
- 57 Firmware Server Settings
- 58 Manual Firmware Update and Upload
- 58 Updating the Handset
- 60 Provisioning
- 61 Provisioning Settings
- 61 Plug-and-Play Settings
- 62 DHCP Settings
- 63 Resynchronization
- 63 Import Configuration
- 64 Export Configuration
- 64 Reset Configuration
- 65 Security
- 65 Administrator Password
- 65 User Password
- 66 Web Server
- 66 Certificates
- 67 System Logs
- 67 Syslog Settings
- 68 Network Trace
- 68 Download Log
- 69 Provisioning Using Configuration Files
- 70 The Provisioning Process
- 71 Resynchronization: configuration file checking
- 71 VSP600 restart
- 72 Configuration File Types
- 73 Data Files
- 74 Configuration File Tips and Security
- 74 Guidelines for the MAC-Specific configuration file
- 75 Securing configuration files with AES encryption
- 77 Configuration File Parameter Guide
- 78 "sip_account" Module: SIP Account Settings
- 78 General configuration file settings
- 86 MAC-specific configuration file settings
- 88 "hs_settings" Module: Handset Settings
- 89 "network" Module: Network Settings
- 89 General configuration file settings
- 90 MAC-specific configuration file settings
- 93 "provisioning" Module: Provisioning Settings
- 96 "time_date" Module: Time and Date Settings
- 100 "log" Module: Log Settings
- 101 "remoteDir" Module: Remote Directory Settings
- 105 "web" Module: Web Settings
- 106 "user_pref" Module: User Preference Settings
- 107 "call_settings" Module: Call Settings
- 109 "file" Module: Imported File Settings
- 109 General configuration file settings
- 110 MAC-specific configuration file settings
- 111 "tone" Module: Tone Definition Settings
- 114 "profile" Module: Password Settings
- 114 General configuration file settings
- 114 MAC-specific configuration file settings
- 115 Troubleshooting
- 115 Common Troubleshooting Procedures
- 117 Appendixes
- 117 Appendix A: Specifications
- 118 Appendix B: Maintenance
- 119 Appendix C: GPL License Information