Delete All Trails. Lowrance LCX-38C HD, LCX-113C HD, LCX-112C, LCX-28C HD

My Trails command (left); Trails Menu (left); Trail Options (right).

Delete All Trails

To remove all of the trails from memory, from the Trails Menu, press

→ to

D

ELETE

A

LL

|

ENT

|

← to

Y

ES

|

ENT.

Update Trail Option

This menu lets you change the way the trail updates occur.

WARNING:

If you uncheck the Update Trail option, automatic trail creation and recording will be turned off. You must turn it back on to record trails. The default setting is on.

From the Trails Menu, press

→ to

O

PTIONS

|

ENT

. With

U

PDATE

A

CTIVE

T

RAIL

highlighted, press

ENT to check it (turn on) or uncheck it (turn off).

Update Trail Criteria (Auto, Time, Distance)

The options are automatic, time or distance. When it's in the default automatic mode, the unit doesn't update the plot trail while you're traveling in a straight line. Once you deviate from a straight line, the unit

"drops" a plot point (trail waypoint) onto the trail. This conserves plot trail points. If a plot trail uses all of the available points allotted to it, the beginning points are taken away and placed at the end of the trail.

From the Trails Menu, press → to

T

RAIL

O

PTIONS

|

ENT

|

↓

to

U

PDATE

C

RITERIA

. Press

↑

or

↓

to select criteria type|

ENT

. If you selected Time, the Update Rate data entry box appears on the menu. If you selected

Distance, the Update Distance data entry box appears on the menu.

Trail Update Rate (Time, Distance)

You can update a trail by time, with a range from 1 second to 9999 seconds; the default is 3 seconds. You can update by distance, with a range from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 miles.

With one of the Update Criteria selected, use the cursor arrows to highlight either the

U

PDATE

R

ATE

(T

IME

)

or

U

PDATE

D

ISTANCE

data entry boxes and press

ENT

. Press

↑

or

↓

to change the first character, then press

→

to the next character and repeat until the entry is correct.

Press

EXIT

to return to the Trail Options Menu.

172