Engine Operations. Lowrance LCX-38C HD, LCX-113C HD, LCX-112C, LCX-28C HD

1. Press

MENU

|

MENU

, select

NMEA 2000

and press

ENT

.

2. The NMEA 2000 menu will appear with five options: Bus Setup, Fuel

Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight

Synchronization. Select

F

UEL

M

ANAGEMENT

and press

ENT

.

3. Highlight

T

ANK

L

OCATION

and press

ENT

. The Tank Location menu will appear with up to three options: Port, Center and Starboard.

4. Select the tank you added fuel to and press

ENT

.

5. Follow the steps below that apply to your tank.

If you filled up the tank:

A. Press the

F

ILL

T

ANK

button and press

ENT

. The following message will appear: Are you sure you wish to Fill Tank? Press

ENT

. Another message will appear: Do you wish to re-calibrate the device? Highlight

N

O

and press

ENT

.

If you did not fill up the tank:

B. Highlight

F

UEL

A

DDED

and press

ENT

to access the

F

UEL

A

DDED

dialog box. Use ↑ ↓ , ← → to input the amount of fuel added to the tank and press

ENT

. Select the

A

DD

F

UEL

button and press

ENT

. The following message will appear: Are you sure you wish to Add Fuel? Highlight

Y

ES

and press

ENT

.

6. Press

EXIT

repeatedly to get back to the main display.

Engine Operations

The lower half of the Fuel Management menu contains the following

Engine Operation functions: Engine Select, Reset Calibration, Reset Trip and Reset Seasonal.

Engine Select

Engine Select allows you to choose the desired engine when resetting calibration, resetting trip fuel and resetting seasonal fuel.

To Reset Calibration:

Choosing the Reset Calibration command will switch fuel flow calibration settings back to factory defaults.

1. Press

MENU

|

MENU

, select

NMEA 2000

and press

ENT

.

2. Highlight

F

UEL

M

ANAGEMENT

and press

ENT

. The Fuel Management menu will appear.

3. Highlight to

E

NGINE

S

ELECT

and press

ENT

. Select the desired engine — the engine attached to the desired fuel flow — and press

ENT

.

4. Highlight

R

ESET

C

ALIBRATION

and press

ENT

. The following confirmation message will appear: Are you sure you wish to Reset Calibration? Select

Y

ES

and press

ENT

. Calibration settings for the selected fuel have been returned to factory defaults.

192