Vizualogic A-1285 Owner's Manual
Διαφήμιση
Διαφήμιση
™
Table of conTenTs
Important Safety Instructions ................................................................1
Package Content ....................................................................................2
System Overview ..................................................................................3
Installation .............................................................................................4
Cable Connection ..................................................................................6
IR Remote Control ................................................................................8
Touch Menu Screens .............................................................................9
System Settings ...................................................................................11
Compatible Disc Types .......................................................................21
Technical Specification .......................................................................23
Welcome
Congratulations on your purchase of the Vizualogic RoadTrip RT Series. This system will provide your family with many years of enjoyment. This sophisticated product provides video entertainment to rear seat passengers without altering the appearance of your vehicle’s original interior.
Reviewing this owner’s manual thoroughly prior to operation will provide you with the best performance and help explain the simple requirements for proper care.
▲
ImporTanT safeTy InsTrucTIons c a u T I o n
RISK OF ELECTRIC SHOCK
DO NOT OPEN
▲
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
cauTIon:
The unit employs a laser system.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should the system require maintenance, contact an authorized service location, see service procedure.
▲
▲
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Use of controls, adjustments of the performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, DO
NOT try to open the enclosure. Visible laser radiation may be present when the enclosure is opened. DO NOT stare into the laser beam.
WarnInG:
FCC regulations states that any change or modification to the equipment, not expressly approved by the maker or its authorized parties could void the user’s authority to operate this equipment.
™ noTe:
- Please dispose of empty batteries according to local regulations in your country.
- All On-Screen-Displays (OSD) and pictures will be based on the English version.
- Design and Specifications may vary in the manual from the actual product in use.
1
™
package content
AUX Cable (1)
USB Cable (1)
2
all-In-one system features
each Vehicle specific all-In-one Kit Includes:
• Driver and Passenger side Vizualogic PerfectMatch Headrest with integrated
Monitor and DVD Player(s).
• DVD and monitor function control via touch screen function.
• A/V control module with multi-source capability.
• Full function remote control. Controls monitor functions, DVD player functions, and A/V source input selection.
• Wireless dual channel infrared headphones.
• Integrated wireless FM modulator.
all-In-one system connection overview
1. A/V Control Module
2. Driver & Passenger
Monitor A/V Output -
Used to output signal to external devices such as aftermarket radios, wired
FM modulators, auxiliary screen’s ect.
3. FM Transmitter Antenna - Connects to the A/V Control Module via the terminal marked “ANT”. Wirelessly outputs the user-selected audio sources information via one of seven user-selectable FM frequencies to the vehicle radio.
4. External A/V Input - Allows the connection of an external A/V source such as a
DVD player, video game system, camcorder, etc. External A/V input is viewable by both headrest monitors.
5. Grey System Connector
6. Driver Monitor (Monitor A) Connectors - These color-coded outputs connect to the color-coded input terminals coming from the Driver Headrest.
7. Passenger Monitor (Monitor B) Connectors - These color-coded outputs connect to the color-coded input terminals coming from the Passenger Headrest.
8. System Power Input Terminal - Connects to the System Power Harness.
9. White System Connector.
10. System Power Harness - Connects to the power input terminal on the white system connector. Wires are color-coded and labeled as follows:
Yellow - +12 BATT (Constant Power)
Red - +12 ACC (Accessory Power)
Black - Ground
Green - Parking Brake
Note: Parking brake wire does not need to be connected for system to operate.
™
3
™
Headrest Installation
section I - Headrest Installation
1. Remove the factory headrests (Detailed instructions can be found in the vehicle’s service manual.
2. Starting with the driver’s side headrest (Monitor A) insert the mini-din connectors into the driver side headrest post guides.
3. Slowly push the cables into the seat. If an obstruction is encountered, pull back slightly on the cable and rotate before continuing. Route the cables so that they exit the bottom of the seatback.
4. Repeat steps 2 and 3 for the passenger’s side headrest (Monitor B).
section II - Wiring
1. Place the A/V Control Module in a well protected area under a seat or behind a panel.
2. Insert the Monitor's system connector cables into the A/V Control Module.
These connectors will click and lock into place when fully inserted.
3. Route the monitor and DVD cables from each headrest towards the A/V Control
Module. If additional length is necessary use the available cable extensions.
NOTE: The available extensions are not interchangeable the cable connector colors must match.
4. Connect these cables from the driver side headrest (Monitor A) to the
DRIVER MONITOR (Monitor A) the A/V Control Module.
5. Connect these cables from the passenger side headrest (Monitor B) to the
PASSENGER MONITOR (Monitor B) on the A/V Control Module.
6. Connect the wireless FM modulator antenna to the connector jack on the side of the A/V control Module labeled ANT.
7. Extend and route the FM modulator antenna under the carpet or behind a panel ensuring to avoid any sharp metal edges or moving parts. For best results do not coil or bundle the FM modulator antenna.
NOTE: If the vehicle has an aftermarket radio that accepts RCA auxiliary inputs or the use of a wireless FM modulator is not desired, simply remove the modulator antenna and connect RCAs to the Driver Monitor A/V Output (located on the side of the A/V control module) and route them to the desired component.
8. Plug the power harness into the A/V control module and connect the power wire leads to 12V+ and 12V ground. The wires are color coded as follows:
Red = ACC Power, Yellow = Constant Power, Black = Ground, Green =
Parking brake.
4
section III - system set-up/sub-menu controls
Enter the Sub-Menu, touch the “MENU” button on the screen to enter the Sub-
Menu. Use the “” and “” buttons to move up and down within the Sub-
Menu. Once the desired item has been highlighted, press the “MENU” button until the desired setting is achieved.
IR CHANNEL – This function changes the IR channel that the monitor transmits from: Ch.‘A’, Ch.‘B’ or ‘OFF’
NOTE: The driver’s side monitor is factory preset to ‘A’ and the passenger side monit or is factory preset to ‘B’. DO NOT set both monitors to the same IR channel, as this causes audible interference through the IR headphones.
SCREEN - Sets the power-up mode for the monitor when system power is turned on.
• “AUTO” - While in this mode the monitor will resume the last state it was in when the system power was last turned off.
• “ON” - When system power is turned on, the monitor will always turn on.
• “OFF” - When system power is turned on, the monitor will always remain off. The monitor must be turned on manually using the power button on the monitor or remote.
DVD MODE - Assigns the headrest identity to ensure proper source identification between Driver DVD, Passenger DVD, Ext. Aux, and Aux. via the on-screen display (OSD).
NOTE: The dual DVD headrest system’s default setting for the driver’s side is set to
‘Monitor 1’ and ‘Monitor 2’ for the passenger side. The single DVD headrest system’s default setting for the driver’s side is set to ‘DS’ and ‘PS’ for the passenger side. Do not set both screens to Monitor 1 / DS or Monitor 2 / PS. These settings must be observed in order to utilize the integrated FM modulator functions properly.
EXIT - Exits the sub-menu.
™
5
™
single & Dual DVD system
7
8
6
5
4 3 2 1
1. Power Button
2. Infrared Transmitter/Power Indicator
3. AUX Jack
4. Headphone Jack
5. Mini USB Port
6. DVD Loader
7. Touch Screen Panel
8. Eject Button
9. SD Card Reader
9
single DVD system only
1. Power Button
2. Power Indicator
3. Infrared Transmitters
4. LCD Touch Screen
6
single & Dual DVD system
Monitor 1
DS
A1285
Monitor 2
PS
A1285
poWer anT a/V ouTpuTs eXTernal a/V InpuT
single DVD system only
Monitor 1
DS
A1285
a/V ouTpuTs
Monitor 2
PS
A1286
poWer anT
™
eXTernal a/V InpuT
7
™
The Ir remote control
Point the remote control no more than
3-4 meters (approx. 21 feet) from the remote control sensor on the front of the player. Keep remote within a ± 30˚ angle.
19
20
1. Adjust Decrease
2. Adjust Increase
3. Title
4. Eject
5. Number Buttons
6. Clear
7. Slow
8. Program
9. Mute
10. Repeat
11. Zoom
12. Play / Pause
13. Right Arrow
14. Stop / Return
15. Fast Reverse
16. Fast Forward
17. Previous
18. Next
19. Monitor Menu
20. Power
21. Menu/PBC
22. Source
23. Subtitle
24. Display
25. Audio
26. USB / SD
27. Up Arrow
28. Setup
29. Enter
30. Left Arrow
31. Down Arrow
32. FM
33. Volume +
34. Volume noTe:
- The distance may vary according to the brightness of ambient light.
- If the remote is not used for an extended period of time, remove the batteries to prevent possible damage from battery leakage and/or corrosion.
- DO NOT place any objects between the remote control unit and the sensor on the RT System.
- DO NOT use the remote control unit while simultaneously operating a remote control unit from another device. They may interfere with each other resulting in improper operation.
-Depending on usage, the batteries in the remote control should normally last for about one year. If the remote control isn’t working, replace the batteries with new batteries and try again.
- DO NOT mix old batteries with used ones.
- DO NOT mix rechargeable batteries with non-rechargeable batteries.
- Incorrect usage of batteries may cause them to leak, corrode or explode.
- If leakage from the batteries occur, properly clean the battery compartment before attempting to install new batteries.
- Make sure the IR sensor is not obstructed by any objects.
8
5
6
7
3
4
1
2
ToucH menu screens
Once the unit is connected to the appropriate power source, press the POWER button to power the unit ON. Touch any area of the screen to enter the menu screen. The screen will display as below.
ent exi t ent
™
A-1285
A-1286
To enter the Main Menu screen, simply press the MENU key on the upper left corner.
The screen will display as below.
back Main Menu exit back Main Menu exit
Main
Audio
Source
Video
Setup
Disc Menu DVD functions
Audio
Source
Video
Setup
A-1285 A-1286
Pressing the SOURCE menu key will take you to the SOURCE menu. Here you can select the AV source type. Select the desired source and press EXIT to exit the main menu. The screen will display as below.
Source exit Main Source exit
DVD SD SD card uSb
Aux input other
Monitor
Aux input
A-1285 A-1286
To get to the SETUP menu, touch any area of the screen to enter the main menu. Then press the SETUP menu key. The SETUP screen allows you to setup the basic functions of the unit. The screen will display as below.
back Setup exit back Setup exit language
- english + reset
Defaults
Power o n
- With car + enter
DVD Setup language
- english + reset
Defaults
Power o n
- With car +
A-1285
9
A-1286
™
Press the AUDIO menu key to enter the AUDIO setup menu. This screen allows you to set the FM modulator settings as well as the IR settings.
back Audio exit back Audio exit fM contro l
-this Screen+ ir headphone
- channel A + fM contro l
-other Screen+ ir headphone
- channel b + fM Source
-this Screen+ fM radio ou t
- 88.1 Mhz +
A-1285 A-1286
Press the VIDEO menu key to enter the VIDEO setup menu. This screen allows you to adjust the picture settings.
back Video exit back Video exit brightnes s
- 100% + contrast
- 100% + brightnes s
- 100% + contrast
- 100% +
Saturatio n
- 100% +
Sharpnes s
- 100% +
Saturatio n
- 100% +
Sharpnes s
- 100% +
A-1285 A-1286
Pressing the DISC menu key will allow you to go back to the disc's Title or Root menu.
Press EXIT to exit the DISC menu.
ent ent
A-1285 back title Men u
ok exit root Menu
A-1286 back title Men u
ok exit root Menu
Pressing the DVD Functions menu key will allow you to setup the special functions of the DVD.
NOTE: DVDs with the following function(s) may be required to use the function keys.
A-1285 back DVD functions
Audio
Angle
Arrows / number s exit
Subtitle repeat enter
DVD Setup A-1286 back DVD functions
Audio
Angle
Arrows / number s exit
Subtitle repeat enter
DVD Setup
10
sysTem seTTInGs
Press SETUP on the Remote Control to enter the system setting menu.
Current Item
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry
WiDe
On eng
Off
On
On
Current Item
GOTO GENERAL SETUP PAGE
On the Remote Control, press either the UP or DOWN or LEFT or
RIGHT arrow buttons to move to the desired menu item and press PLAY to select the menu item.
™
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On
4:3 pansCan
4:3 leTTerbOx
16:9
GOTO GENERAL SETUP PAGE
set TV Display mode to the correct ratio:
• Press the rIGHT arrow buttons to enter the sub-menu. If you want to set the screen to "WIDE", press the DoWn arrow twice to move your selection until the "WIDE" item is selected, press enTer to select.
• Press seTup to exit these system settings.
noTe: There are three (3) screen ratio modes available: 16:9 WIDE, 4:3LB
(Letter Box) and 4:3PS (Pan Scan). Different disc formats will display different images depending on the screen setting and size used. Here is an example of the different screen ratio format.
11
™
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On
On
Off
SET ANGLE MARK
4:3LB Allows you to see movies in their original aspect ratio. The entire frame of the movie will be displayed. 16:9 recorded movies will occupy a smaller portion of the screen and you will see black margins above and below the picture.
4:3PS The movie will be shown in full screen without any black margins. Parts of the image will be cutoff from the right and left side.
16:9 Allows you to see movies in their original aspect ratio.
16:9 Depending on the DVD screen format (e.g.
2.35:1), the wide screen setting may still have black margins above and below the picture.
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On english gerMan frenCh spanish iTalian pOrTuguese
DuTCh
Danish
SET OSD LANGUAGE
12
When playing a DVD disc with the
Angle option set to ON, the screen will display the angle mark. This will give you the possibility to view multiple angle DVDs. When the Angle option is set to OFF, no angle mark will be displayed.
NOTE: DVD must have multiple
angle options for this option to work.
™
To select the language for your On
Screen Display (OSD) use this menu item. There are multiple languages available.
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On
On
Off
CAPTIONS
on: To display captions (Subtitles).
off: Captions will not be displayed
(No Subtitles)
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On
On
Off
SCREEN SAVER
When there is no activity with the player for some time, a screen saver will start to prevent damage to the screen. Select on to activate the screen saver function or select off to deactivate this function.
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On
On
Off
SET LAST MEMORY STATE
on: When you turn off the player, it will memorize the last play time. So if you turn on the player the next time and the same disc is played, it will resume play from the last memory point.
off: Disable the last memory function.
13
™
--AUDIO SETUP PAGE-analOg auDiO seTup equalizer
3D prOCessing hDCD
GOTO AUDIO SETUP PAGE
Press enTer to enter the Analog Audio setup page. The next page will be shown:
--ANALOG AUDIO SETUP PAGE--
DOWnMix sTr lT/rT sTereO
--EQUALIZER PAGE-sOunD MODe bass bOOsT super base
Treble bOOsT
Off
Off
Off
Off
Off rOCk pOp liVe
DanCe
TeChnO
ClassiC sOfT
SELECT EQUALIZER TYPE
Select the eQualIZer menu item to setup your preferred Equalizer mode. Press
enTer to enter this selection.
You can select one of these preset Equalizer modes to adjust the audio signal to your liking.
--EQUALIZER PAGE-sOunD MODe bass bOOsT super base
Treble bOOsT
Off
Off
Off
Off
On
Off
SET DOWNMIX MODE
Set sound mix output mode:
-Press the rIGHT arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to "STEREO"; press the DoWn arrow once to move the selection to "STEREO", than press
enTer.
-If you want to have Dolby Pro Logic stereo
(the decoded signal will create a 2ch reality simulating effect via the R/L connectors), select "LT/RT" then press ENTER.
BASS BOOST
--EQUALIZER PAGE-sOunD MODe bass bOOsT super base
Treble bOOsT
Off
Off
Off
Off
On
Off
SUPER BASS
You can select one of these modes to adjust the Bass and Treble signal to your liking. on will switch the selected mode on and off will switch it back to normal Audio playback.
noTe: Please be advised that sometimes the
BASS on an Audio CD or DVD is already very low, using the Bass Boost or Super Bass can overload your speakers resulting in poor sound quality.
--EQUALIZER PAGE-sOunD MODe bass bOOsT super base
Treble bOOsT
Off
Off
Off
Off
On
Off
TREBLE BOOST
14
--3D PROCESSING PAGE-prO lOgiC ii reVers MODe Off
Off
COnCerT liVing rOOM hall baThrOOM
CaVe arena
ChurCh
REVERB MODE
Select 3D processInG to setup your preferred 3D mode. Press play to enter this selection and to set up your preferred
Audio mode for a better surround effect.
Press enTer or the rIGHT arrow to enter this selection.
--VIDEO SETUP PAGE--
COlOr seTTing
GO TO VIDEO SETUP PAGE
Select this menu item to setup your Video
Quality modes. Press enTer to enter this selection.
COLOR SETTING SETUP filTer 1x Off
1x
2x
FILTER
Select HDCD to setup your preferred Audio mode for HDCD. Press enTer to enter this selection and to setup your preferred filter mode for HDCD (default is 1X).
1x = 48K Sampling, 2x = 96K Sampling
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
00
00
1T
MiO
00
00 nOne high
MeDiuM lOW
SHARPNESS
You can set the picture sharpness to these choices. If a video image is light, select the
loW option. If a video image is dark, select the HIGH option.
™
15
™
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
MiO
00
00 nOne
00
00
1T
BRIGHTNESS
You can set the Brightness to your liking. Press enTer or the rIGHT arrow to enter the brightness control, then press the up or DoWn arrow to adjust the image. Press the
lefT arrow to go back to the menu.
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
00
00
1T
MiO
00
00 nOne
CONTRAST
You can set the Contrast to your liking.
Press enTer or the rIGHT arrow to enter the contrast control, then press the up or DoWn arrow to adjust the image. Press the lefT arrow to go back to the menu.
brightneSS iiiiiiiii.......0
contrASt iiiiiiiiii......0
BRIGHTNESS CONTRAST
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
00
00
1T
MiO
00
00 nOne high
MeDiuM lOW nOne
GAMMA
Gamma refers to the exponent between video or pixel values and the displayed brightness. You can set the Gamma to these choices.
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
MiO
00
00 nOne
00
00
1T
OT
1T
LUMA DELAY
You can adjust the luma Delay
(Luminance Delay) by selecting one of these choices to best suit the brightness of your TV.
16
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
MiO
00
00 nOne
00
00
1T
HUE
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
MiO
00
00 nOne
00
00
1T
SATURATION hue iiiiiiiiiiiiii..........0
SAturAtion iiiiiiiiii......0
HUE
You can set the Hue (for NTSC) to your liking. Press enTer or the rIGHT arrow to enter the Hue control, then press the up or DoWn arrow to adjust the image. Press the lefT arrow to go back to the menu.
SATURATION
You can set the Saturation to your liking.
Press enTer or the rIGHT arrow to enter the Saturation control, then press the up or DoWn arrow to adjust the image. Press the lefT arrow to go back to the menu.
-- PREFERENCE PAGE --
TV Type pbC parenTal
DefaulT pal
Off pal
MulTi nTsC
-- PREFERENCE PAGE --
TV Type pbC parenTal
DefaulT pal
Off on off
SET TV STANDARD
Select this menu item to set up your preferred video output format. PAL is commonly used in Europe while NTSC is commonly used in the USA and Japan.
Select mulTI only if your TV supports both formats. The output signal will automatically follow the video format on the DVD disc.
SET PBC STATE
For VCD and SVCD, this selection turns
ON or OFF the Playback Control (PBC) function. VCD or SVCD media have
PBC menus that contain the track list.
The default PBC state is set to ON. In
OFF mode, track(s) cannot be selected.
17
™
™
-- PREFERENCE PAGE --
TV Type pbC parenTal
DefaulT pal
Off
1- kiD SAf
2- g
3- Pg
4- Pg 13
5- Pg r
6- r
7- nc 17
8- ADult
SET PARENTAL CONTROL set age control Grade:
For DVD discs with a rating system programmed (North America CARA) parents can prohibit watching content that might be inadvisable for children.
Press the RIGHT arrow to enter the submenu. If you want to change the age control grade press either the ▲ UP or
DOWN arrow to scroll to the available selections.
Selection 1 is Kid safe.
Selection 2 is General Audiences.
Selection 3 is PG (Parental Guidance
Suggested, some material may not be suitable for children).
Selection 4 is PG-13 (Parents strongly cautioned, some material may be inappropriate for children under 13).
Selection 5 is PG-R (Restricted, under 17 requires accompanying parent or adult guardian).
Selection 6 is Restricted Viewing.
Selection 7 is NC-17 (No one 17 and under admitted).
Selection 8 is for Adult Entertainment or X rated movies.
Hereafter, a screen will indicate to enter a password, if the factory password has never been modified, you can use [123456] by pressing the corresponding number buttons on the remote control. Select “YES” or
“NO” with either the left or right arrow key and press enTer to confirm.
-- PREFERENCE PAGE --
TV Type pbC parenTal
DefaulT pal
Off reSet
LOAD FACTORY SETTING
With this option you can select to reset to the factory preset values.
-- PASSWORD SETUP PAGE -passWOrD MODe On passWOrD on off
PASSWORD MODE
With this option you can select to set your password protection ON or OFF.
-- PASSWORD SETUP PAGE -passWOrD MODe On passWOrD chAnge
CHANGE PASSWORD
Use this menu to change the factory set password [123456].
OlD passWOrD neW passWOrD
COnfirM pWD ok
18
™
creaTInG a pIn number
Enter the PIN number with the number buttons of the remote control and press
enTer. Now enter the new password and press enTer again. Confirm your new password and press enTer again to save the PIN number. Please write down the PIN number and store in a safe location.
Important: Do noT forget the PIN number, there is no way to retrieve the PIN number if forgotten or lost.
With this selection X you exit the system setup and return to normal viewing of the video.
EXIT SETUP MENU
mp3 / mpeG4 playbacK
The Vizualogic RoadTrip RT Series DVD Player is able to play CD-R/CD-RW recorded with MP3/MPEG4 audio and video files. When a disc with MP3 or
MPEG4 files (including multiple directories) is loaded in the system the following screen will display.
To go to the preferred music or video directory, press the ▲ and/or arrows to scroll to your selection and confirm your choice by pressing the enTer button.
To select your preferred song or video title, press the ▲ and/or arrows to scroll to your selection and confirm your choice by pressing the enTer button. Your selected song or video will now play.
19
™
play mode:
There are five (5) play modes available when playing MP3/MPEG4 (.AV1) recorded discs:
SINGLE - All the songs / videos will be played only once.
REPEAT ONE - The current playing song / video will be repeated.
REPEAT FOLDER - Only the songs / videos of the current folder will be repeated.
FOLDER - Only all the songs / videos of this folder will be played once.
SHUFFLE/RANDOM - The songs / videos will be played in random order.
When the disc is playing, press REPEAT to select your repeat mode, the Display will show:
other functions
Functions such as MUTE, VOLUME, PAUSE, PREVIOUS, NEXT, etc. are also available for MP3/MPEG4 recorded discs. These operations are the same as playing an Audio CD.
20
™
compaTIble DIsK Types
Some DVD discs may have special requirements for playing, with which this system may not compatible. Please refer to the specifications on the individual disc.
DISC TYPE
DVD
Content
AUDIO/VIDEO
Size
12CM
Total Play Time
About 4.7 GB - 2 hrs.
(Single Side & Single Layer)
About 8.5 GB - 4 hrs.
(Single Side & Double Layer)
About 9.4 GB - 4 hrs.
(Double Side & Double Layer)
About 17 GB - 8 hrs.
(Double Side & Double Layer)
About 700 MB - 74 Minutes
About 700 MB - 300 Minutes
CD-DA
MP3
AUDIO
MP3 AUDIO
12CM
12CM
Discs Types
The RoadTrip RT Series can play the following types of discs: DVD / CD / CD-R
/ CD-RW / DVD-R / DVD-RW / DVD+R / DVD+RW. Other discs not listed cannot be played. Please DO NOT play discs smaller than 12cm or odd shape discs.
The RoadTrip RT Series uses the NTSC/PAL color systems. It cannot play discs recorded with other systems, such as SECAM.
region code
The region code for this player is 1 which indicate North America.
copyright
According to the related laws, DVD discs without proper authorization are not allowed to be copied, broadcast, cable broadcast, or played publicly with the
Vizualogic RoadTrip RT Series.
The Vizualogic RoadTrip RT Series incorporates copyright protection technology that is protected by method of claims of certain U.S. patents and other Intellectual
Property Rights owned by their rights owners. Reverse engineering or disassembly is prohibited.
21
™
22
TecHnIcal specIfIcaTIons
Specifications:
Multimedia player supports: DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, CD, CD-R,
CD-RW, VCD, SVCD, MP3 and JPG picture disks.
MPEG4 support: DivX 3.11/4.02/5.02/5.03/5.05 DivX Pro/Subtitles .srt .sub
Electronic Shock Protection (ESP) and Mechanical Shock Protection
PAL/NTSC compatible
Multi Lingual On Screen Display (OSD)
Integrated Dome Lights with Door Sensor Connections
A/V input via RCA connectors
USB Connector
Multi-Language Menu Selection
Kit Content:
Dual Monitors with Integrated DVD Players (RT20 Only)
(2) - Wireless Headphones (Batteries Included)
Remote Control (Battery Included)
A/V Box with A/V Cables
User Manual
Specifications:
™
Power Consumption
FM Stereo Transmitter
IR Carrier Frequency
TV Signal System
Laser
Frequency Range
S/N
Audio Dynamic Range
Harmonic Distortion
Input Sensitivity
Operation Temperature
Storage Temperature
12V DC (1 1-15V) /1.4A (Max 1.6A)
88.5MHz / 88.7MHz / 88.9MHz / 89.1MHz / 89.3MHz
89.5MHz / 89.7MHz / 89.9MHz
2.3 / 2.8 MHz
PAL/NTSC/MULTI
Semi-conductor laser, wave length 600nm, 780nm
48 KHz pulse modulation 20 Hz ~ 22 KHz
96 KHz pulse modulation 20 Hz ~ 22 KHz
≥ 65 dB
> 85 dB
0,01%
500 mv
0 ˚C ~ 40 ˚C
-15 ˚C ~ 50 ˚C
23
™
™
99-1285-001
DIsclaImer
fm modulator notification for all european union Vizualogic customers.
Due to e-1 regulations pertaining to fm modulation in aftermarket mobile electronics products, the following changes have been made for all Vizualogic headrest kits shipped to europe:
- The systems will be shipped with the default set to fm modulator off.
- The fm modulators will be inoperable as the antenna has been removed and the antenna receptacle disabled.
1493 bentley Drive - corona - ca - 92879 www.vizualogic.com
Λήψη
Δημόσιος σύνδεσμος ενημερώθηκε
Ο δημόσιος σύνδεσμος για τη συνομιλία σας ενημερώθηκε. You may view and manage your chat links after registration here.
Δημόσιος σύνδεσμος εγγράφου
Διαφήμιση
