STGB10NB60S
STGP10NB60S
16 A, 600 V, low drop IGBT
Features
■
■
Low on-voltage drop (V
CE(sat)
)
High current capability
Applications
■
■
■
Light dimmer
Static relays
Motor drive
Description
This IGBT utilizes the advanced PowerMESH™ process featuring extremely low on-state voltage drop in low-frequency working conditions (up to 1 kHz).
TAB
TO-220
1
2
3
TAB
1
3
D
2
PAK
Figure 1.
Internal schematic diagram
Table 1.
Device summary
Order codes
STGB10NB60ST4
STGP10NB60S
Marking
GB10NB60S
GP10NB60S
September 2011 Doc ID 10985 Rev 4
Package
D
2
PAK
TO-220
Packaging
Tape and reel
Tube
1/19
www.st.com
19
5
6
3
4
1
2
Contents
Contents
STGB10NB60S, STGP10NB60S
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2/19 Doc ID 10985 Rev 4
STGB10NB60S, STGP10NB60S Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Parameter
V
I
I
CES
C
(1)
C
(1)
Collector-emitter voltage (V
GE
= 0)
Continuous collector current at
T
C
= 25 °C
Continuous collector current at
T
C
= 100 °C
Turn-off latching current I
CL
(2)
I
CP
(3)
V
GE
P
TOT
T j
Pulsed collector current
Gate-emitter voltage
Total dissipation at T
C
= 25 °C
Operating junction temperature
1.
Calculated according to the iterative formula
I
C
(
T
C
)
=
R thj – c
×
V
T
–
) max )
(
T
T j max
)
,
I
C
(
T
C
) )
2.
Vclamp = 80% of V
CES
, T j
=150 °C, R
G
=1k
Ω, V
GE
=15 V
3.
Pulse width limited by maximum junction temperature and turn-off within RBSOA
Value
600
29
16
20
80
± 20
80
– 55 to 150
Table 3.
Symbol
R thj-case
R thj-amb
Thermal data
Parameter
Thermal resistance junction-case
Thermal resistance junction-ambient
Value
1.56
62.5
Unit
°C/W
°C/W
Unit
V
A
A
A
A
V
W
°C
Doc ID 10985 Rev 4 3/19
Electrical characteristics STGB10NB60S, STGP10NB60S
(T j
=25 °C unless otherwise specified)
Table 4.
Symbol
Static
Parameter Test conditions
V
(BR)CES
Collector-emitter breakdown voltage (V
GE
= 0)
I
C
= 250 µA
V
(BR)ECS
I
I
GES
CES
Emitter-collector breakdown voltage (V
GE
= 0)
I
C
= 1 mA
Gate-emitter leakage current (V
CE
= 0)
V
GE
= ±20 V
Collector cut-off current
(V
GE
= 0)
V
V
CE
CE
= 600 V
= 600 V, T j
= 125 °C
V
GE(th)
Gate threshold voltage
V
CE(sat)
Collector-emitter saturation voltage
V
CE
= V
GE
, I
C
= 250 µA
V
GE
= 15 V, I
C
= 5 A
V
GE
= 15 V, I
C
= 10 A
V
GE
= 15 V, I
C
= 10 A,
T j
= 125 °C g fs
(1)
Forward transconductance V
CE
= 15 V
,
I
C
= 10 A
1.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5%
Table 5.
Symbol
C ies
C oes
C res
Dynamic
Parameter
Input capacitance
Output capacitance
Reverse transfer capacitance
Q g
Total gate charge
Min.
Typ.
Max. Unit
600 V
20 V
±100 nA
2.5
5
10
100
5
1.15
1.35
1.75
µA
µA
V
V
1.25
S
V
CE
Test conditions
= 25 V, f = 1 MHz, V
GE
= 0
Min.
Typ.
Max.
Unit
-
610
65
12
pF pF pF
V
CE
= 400 V, I
C
= 10 A,
V
GE
= 15 V
(see Figure 17)
33 nC
4/19 Doc ID 10985 Rev 4
STGB10NB60S, STGP10NB60S Electrical characteristics
Table 6.
Symbol
t d(on) t r
(di/dt) on t r
(V off
) t d
( off
) t f
Turn-on delay time
Current rise time
Turn-on current slope
Off voltage rise time
Turn-off delay time
Current fall time t r
(V off
) t d
( off
) t f
Switching on/off (inductive load)
Parameter Test conditions
Off voltage rise time
Turn-off delay time
Current fall time
V
CC
= 480 V, I
C
= 10 A
R
G
= 1 k
Ω, V
GE
= 15 V
(see Figure 16)
V
CC
= 480 V, I
C
= 10 A
R
G
= 1 k
Ω, V
GE
= 15 V
(see Figure 16)
V
CC
= 480 V, I
C
= 10 A
R
G
= 1 k
Ω, V
GE
= 15 V,
T j
= 125 °C
(see Figure 16)
Min.
Typ.
Max. Unit
-
-
0.7
0.46
8
2.2
1.2
1.2
-
-
µs
µs
A/µs
µs
-
3.8
1.2
1.9
µs
Table 7.
Symbol
Eon
(1)
E off
(2)
E ts
E off
(2)
Switching energy (inductive load)
Parameter
Turn-on switching losses
Turn-off switching losses
Total switching losses
Turn-off switching losses
Test conditions
V
CC
= 480 V, I
C
= 10 A
R
G
= 1 k
Ω, V
GE
= 15 V
(see Figure 16)
V
CC
= 480 V, I
C
= 10 A
R
G
= 1 k
Ω, V
GE
= 15 V,
T j
= 125 °C
(see Figure 16)
Min.
Typ.
Max.
Unit
-
-
0.6
5
5.6
8 -
mJ mJ mJ mJ
1.
Eon is the turn-on losses when a typical diode is used in the test circuit. If the IGBT is offered in a package with a co-pack diode, the co-pack diode is used as external diode. IGBTs and diode are at the same temperature (25°C and 125°C).
2.
Turn-off losses include also the tail of the collector current.
Doc ID 10985 Rev 4 5/19
Electrical characteristics
Figure 2.
Output characteristics
STGB10NB60S, STGP10NB60S
Figure 3.
Transfer characteristics
Figure 4.
Transconductance Figure 5.
Collector-emitter on voltage vs. temperature
Figure 6.
Collector-emitter on voltage vs. collector current
Figure 7.
Normalized gate threshold vs. temperature
6/19 Doc ID 10985 Rev 4
STGB10NB60S, STGP10NB60S Electrical characteristics
Figure 8.
Normalized breakdown voltage vs. temperature
Figure 9.
Gate charge vs. gate-emitter voltage
Figure 10.
Capacitance variations Figure 11.
Switching losses vs. temperature
Figure 12.
Switching losses vs. gate resistance
Figure 13.
Switching losses vs. collector current
Doc ID 10985 Rev 4 7/19
Electrical characteristics STGB10NB60S, STGP10NB60S
Figure 14. Thermal impedance for TO-220 and
D
2
PAK
Figure 15. Turn-off SOA
8/19 Doc ID 10985 Rev 4
STGB10NB60S, STGP10NB60S
Figure 16.
Test circuit for inductive load switching
Figure 17.
Gate charge test circuit
Test circuits
Figure 18.
Switching waveforms
Doc ID 10985 Rev 4 9/19
Package mechanical data
4 Package mechanical data
STGB10NB60S, STGP10NB60S
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
® specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
10/19 Doc ID 10985 Rev 4
STGB10NB60S, STGP10NB60S
E
E1 e e1
H
J1 c c2
D
D1
A
A1 b b2
L
L1
L2
R
V2
Table 8.
Dim.
D²PAK (TO-263) mechanical data
Min.
0.45
1.23
8.95
7.50
4.40
0.03
0.70
1.14
10
8.50
4.88
15
2.49
2.29
1.27
1.30
0°
mm
Typ.
2.54
0.4
Package mechanical data
Max.
4.60
0.23
0.93
1.70
0.60
1.36
9.35
10.40
5.28
15.85
2.69
2.79
1.40
1.75
8°
Doc ID 10985 Rev 4 11/19
Package mechanical data
Figure 19.
D²PAK (TO-263) drawing
STGB10NB60S, STGP10NB60S
0079457_S
12/19 Doc ID 10985 Rev 4
STGB10NB60S, STGP10NB60S
D
D1
E e
A b b1 c e1
F
H1
J1
L
Table 9.
Dim.
TO-220 type A mechanical data
Min.
4.40
0.61
1.14
0.48
15.25
L1
L20
L30
∅
P
Q
6.20
2.40
13
3.50
10
2.40
4.95
1.23
3.75
2.65
mm.
Typ.
1.27
16.40
28.90
Package mechanical data
3.85
2.95
Max.
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
Doc ID 10985 Rev 4 13/19
Package mechanical data
Figure 20.
TO-220 type A drawing
STGB10NB60S, STGP10NB60S
0015988_typeA_Rev_S
14/19 Doc ID 10985 Rev 4
STGB10NB60S, STGP10NB60S
5 Packaging mechanical data
Packaging mechanical data
D1
E
F
K0
P0
A0
B0
D
P1
P2
R
T
W
Table 10.
D²PAK (TO-263) tape and reel mechanical data
Tape mm.
Dim.
Dim.
Min.
10.5
15.7
1.5
1.59
1.65
11.4
4.8
3.9
11.9
1.9
50
0.25
23.7
Max.
10.7
15.9
1.6
1.61
1.85
11.6
5.0
4.1
12.1
2.1
0.35
24.3
N
T
D
G
A
B
C
Min.
1.5
12.8
20.2
24.4
100
Base qty
Bulk qty
Reel mm.
Figure 21.
D²PAK footprint
(a)
16.90
Max.
330
13.2
26.4
30.4
1000
1000
12.20
9.75
Doc ID 10985 Rev 4
3.50
1.60
5.08
Footprint
15/19
Packaging mechanical data
Figure 22.
Tape
T
Top cover tape
K0
B0
STGB10NB60S, STGP10NB60S
10 pitches cumulative tolerance on tape +/- 0.2 mm
P0
D P2
F
E
W
A0
P1
User direction of feed
D1
User direction of feed
R
Bending radius
AM08852v2
16/19 a.
All dimension are in millimeters.
Doc ID 10985 Rev 4
STGB10NB60S, STGP10NB60S
Figure 23.
Reel
REEL DIMENSIONS
A
D
B
40mm min.
Access hole
At sl ot location
Packaging mechanical data
T
C
N
Full radius
Tape slot in core for tape start 25 mm min.
width
G measured at hub
AM08851v2
Doc ID 10985 Rev 4 17/19
Revision history STGB10NB60S, STGP10NB60S
Table 11.
Document revision history
Date
10-Nov-2004
28-Feb-2005
16-Dec-2010
27-Sep-2011
Revision
1
2
3
4
Changes
New release.
Some values changed in
Table 4: Static
.
Updated
Table 2: Absolute maximum ratings
.
Updated mechanical data
Section 4: Package mechanical data
.
Modified: unit value
Table 7 on page 5
,
Figure 2
and
Figure 3 on page 6
.
Updated mechanical data D²PAK
Table 8 on page 11
and
Figure 19 on page 12
.
Removed order code STGP10NB60SFP and TO-220FP package mechanical data.
18/19 Doc ID 10985 Rev 4
STGB10NB60S, STGP10NB60S
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 10985 Rev 4 19/19
