STB6NK60Z - STB6NK60Z-1
STP6NK60ZFP - STP6NK60Z
N-channel 600 V - 1
Ω - 6 A - TO-220/TO-220FP/D
2
PAK/I
2
PAK
Zener-Protected SuperMESH™ Power MOSFET
Features
Type
STB6NK60Z
STB6NK60Z-1
STP6NK60ZFP
STP6NK60Z
V
DSS
600 V
600 V
600 V
600 V
R
DS(on)
I
D
P
W
< 1.2
Ω 6 A 110 W
< 1.2
Ω 6 A 110 W
< 1.2
Ω 6 A
30 W
< 1.2
Ω 6 A 110 W
■
■
■
Extremely high dv/dt capability
100% avalanche tested
Gate charge minimized
Application
■ Switching applications
Description
The SuperMESH™ series is obtained through an extreme optimization of ST’s well established strip-based PowerMESH™ layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications.
TO-220
1
2
3
I²PAK
1
2
3
1
3
D²PAK
1
TO-220FP
2
3
Figure 1.
Internal schematic diagram
Table 1.
Device summary
Order codes
STB6NK60Z
STB6NK60Z-1
STP6NK60ZFP
STP6NK60Z
Marking
B6NK60Z
B6NK60Z
P6NK60ZFP
P6NK60Z
November 2007 Rev 8
Package
D²PAK
I²PAK
TO-220FP
TO-220
Packaging
Tape & reel
Tube
Tube
Tube
1/17
www.st.com
17
5
6
3
4
1
2
Contents
Contents
STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z Electrical ratings
Table 2.
Absolute maximum ratings
Symbol Parameter
V
DS
V
GS
I
D
Drain-source voltage (V
Gate-source voltage
GS
= 0)
I
D
Drain current (continuous) at T
C
= 25 °C
Drain current (continuous) at T
C
= 100 °C
I
DM
(2)
P
TOT
V
ESD(G-S)
Drain current (pulsed)
Total dissipation at T
C
= 25 °C
Derating factor
G-S ESD (HBM C=100 pF, R=1.5 k
Ω) dv/dt
(3)
Peak diode recovery voltage slope
V
ISO
T j
T stg
Insulation withstand voltage (DC)
Operating junction temperature
Storage temperature
1.
Limited only by maximum temperature allowed
2.
Pulse width limited by safe operating area
3.
I
SD
≤ 6 A, di/dt ≤ 200 A/µs, V
DD
= 80% V
(BR)DSS
Table 3.
Thermal data
Symbol Parameter
Rthj-case Thermal resistance junction-case max
Rthj-amb Thermal resistance junction-amb max
T l
Maximum lead temperature for soldering purpose
Table 4.
Symbol
I
AR
E
AS
Avalanche characteristics
Parameter
Avalanche current, repetitive or not-repetitive
(pulse width limited by Tj max)
Single pulse avalanche energy
(starting T
J
= 25 °C, I
D
= I
AR
, V
DD
= 50 V)
Value
Unit
TO-220/D²/I²PAK TO-220FP
600
± 30
6
3.8
24
110
0.88
6
(1)
3.8
(1)
24
(1)
30
0.24
3500
4.5
A
A
W
W/°C
V
V/ns
V
V
A
-2500 V
-55 to 150 °C
Value
Unit
TO-220/D²/I²PAK TO-220FP
1.14
4.2
62.5
°C/W
°C/W
300 °C
Value
6
210
Unit
A mJ
3/17
Electrical characteristics STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
(T
CASE
=25°C unless otherwise specified)
Table 5.
Symbol
On/off states
Parameter
V
(BR)DSS
Drain-source breakdown voltage
V
R
I
I
DSS
GSS
GS(th)
DS(on)
Zero gate voltage drain current (V
GS
= 0)
Gate-body leakage current (V
DS
= 0)
Gate threshold voltage
Static drain-source on resistance
Test conditions Min.
Typ.
Max.
Unit
I
D
= 1 mA, V
GS
= 0
V
DS
= Max rating
V
DS
= Max rating, T
C
= 125 °C
600
V
GS
= ± 20 V
V
DS
= V
GS
, I
D
= 100 µA
V
GS
= 10 V, I
D
= 3 A
3
1
1
50
±10
3.75
4.5
1.2
V
µA
µA
µA
V
Ω
Table 6.
Symbol
Dynamic
Parameter Test conditions Min.
Typ.
Max.
Unit
g fs
(1)
C
C
C iss oss rss
Forward transconductance
V
DS
Input capacitance
Output capacitance
Reverse transfer capacitance
V
V
DS
GS
= 8 V
,
I
D
= 3 A
= 25 V, f = 1 MHz,
= 0
5
905
115
25
S pF pF pF
C oss eq
(2)
.
Equivalent output capacitance
Q g
Q gs
Q gd
Total gate charge
Gate-source charge
Gate-drain charge
V
V
V
GS
DD
GS
= 0, V
= 480 V, I
= 10 V
DS
= 0 to 480 V
D
(see Figure 18)
= 6 A,
56
33
6
17
46 pF nC nC nC
1.
Pulsed: pulse duration=300µs, duty cycle 1.5%
2.
C oss eq.
is defined as a constant equivalent capacitance giving the same charging time as C oss increases from 0 to 80% V
DSS
when V
DS
4/17
STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z Electrical characteristics
Table 7.
Symbol
t d(on) t r t d(off) t f
Switching times
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Test conditions
V
DD
= 300 V, I
D
= 3 A
R
G
= 4.7
Ω V
GS
= 10 V
(see Figure 17)
Min.
Typ.
Max.
Unit
14
14
47
19 ns ns ns ns
Table 8.
Symbol
Source drain diode
Parameter Test conditions
I
SD
I
SDM
(1)
V
SD
(2) t rr
Q rr
I
RRM
Source-drain current
Source-drain current (pulsed)
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
I
SD
SD
= 6 A, di/dt = 100 A/µs
V
DD
= 50 V, T j
= 150 °C
(see Figure 19)
1.
Pulse width limited by safe operating area
2.
Pulsed: pulse duration= 300 µs, duty cycle 1.5%
= 6 A, V
GS
= 0
Min Typ.
Max Unit
445
2.7
12
6
24
1.6
A
A
V ns
µC
A
Table 9.
Symbol
Gate-source zener diode
Parameter Test conditions Min.
Typ.
Max.
Unit
BV
GSO
(1)
Gate-source breakdown voltage
Eggs± 1 mA (open drain) 30 V
1.
The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s
ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the usage of external components.
5/17
Electrical characteristics STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
Figure 2.
Safe operating area for TO-220/
I²PAK/ D²PAK
Figure 3.
Thermal impedance for TO-220/
I²PAK/ D²PAK
Figure 4.
Safe operating area for TO-220FP Figure 5.
Thermal impedance for TO-220FP
Figure 6.
Output characteristics Figure 7.
Transfer characteristics
6/17
STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
Figure 8.
Transconductance Figure 9.
Electrical characteristics
Static drain-source on resistance
Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations
Figure 12. Normalized gate threshold voltage vs temperature
Figure 13. Normalized on resistance vs temperature
7/17
Electrical characteristics STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
Figure 14. Source-drain diode forward characteristics
Figure 15. Normalized B
VDSS
vs temperature
Figure 16. Maximum avalanche energy vs temperature
8/17
STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
3 Test circuit
Figure 17. Switching times test circuit for resistive load
Figure 18. Gate charge test circuit
Test circuit
Figure 19. Test circuit for inductive load switching and diode recovery times
Figure 20. Unclamped Inductive load test circuit
Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform
9/17
Package mechanical data
4
STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at:
www.st.com
10/17
STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
TO-220 mechanical data
Package mechanical data
Dim
L
L1
L20
L30
∅P
Q e1
F
H1
J1
D
D1
E e
A b b1 c
Min
4.40
0.61
1.14
0.49
15.25
10
2.40
4.95
1.23
6.20
2.40
13
3.50
3.75
2.65
mm
Typ
1.27
16.40
28.90
Max
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
3.85
2.95
Min
0.173
0.024
0.044
0.019
0.6
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
0.147
0.104
inch
Typ
0.050
0.645
1.137
Max
0.181
0.034
0.066
0.027
0.62
0.409
0.106
0.202
0.051
0.256
0.107
0.551
0.154
0.151
0.116
11/17
Package mechanical data STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
DIM.
E
F
F1
F2
G
G1
H
A
B
D
L5
L6
L7
Ø
L2
L3
L4
MIN.
4.4
2.5
2.5
0.45
0.75
1.15
1.15
4.95
2.4
10
28.6
9.8
2.9
15.9
9
3
TO-220FP MECHANICAL DATA
mm.
TYP
16
1.7
1.7
5.2
2.7
10.4
MAX.
4.6
2.7
2.75
0.7
1
30.6
10.6
3.6
16.4
9.3
3.2
MIN.
0.173
0.098
0.098
0.017
0.030
0.045
0.045
0.195
0.094
0.393
1.126
.0385
0.114
0.626
0.354
0.118
inch
TYP.
0.630
MAX.
0.181
0.106
0.108
0.027
0.039
0.067
0.067
0.204
0.106
0.409
1.204
0.417
0.141
0.645
0.366
0.126
L6
L7
L3
L2
L5
L4
1 2 3
12/17
STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z Package mechanical data
DIM.
e1
E
L c c2
D e
L1
L2
A
A1 b b1
0.49
1.23
8.95
2.40
4.95
10
13
3.50
1.27
MIN.
4.40
2.40
0.61
1.14
TO-262 (I
2
PAK) MECHANICAL DATA
mm.
TYP inch
TYP.
0.70
1.32
9.35
2.70
5.15
10.40
14
3.93
1.40
MAX.
4.60
2.72
0.88
1.70
0.019
0.048
0.352
0.094
0.194
0.393
0.511
0.137
0.050
MIN.
0.173
0.094
0.024
0.044
0.027
0.052
0.368
0.106
0.202
0.410
0.551
0.154
0.055
MAX.
0.181
0.107
0.034
0.066
13/17
Package mechanical data STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
DIM.
G
L
L2
L3
M
R
V2
D
D1
E
E1
B
B2
C
C2
A
A1
A2
10
4.88
15
1.27
1.4
2.4
0º
MIN.
4.4
2.49
0.03
0.7
1.14
0.45
1.23
8.95
D
2
PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
TYP
0.93
1.7
0.6
1.36
9.35
MAX.
4.6
2.69
0.23
MIN.
0.173
0.098
0.001
0.027
0.044
0.017
0.048
0.352
8
10.4
0.393
8.5
5.28
15.85
1.4
1.75
3.2
0.192
0.590
0.050
0.055
0.094
0.4
4º
inch
TYP.
0.315
0.334
0.015
0.208
0.625
0.055
0.068
0.126
MAX.
0.181
0.106
0.009
0.036
0.067
0.023
0.053
0.368
1
14/17
STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
5 Packing mechanical data
D
2
PAK FOOTPRINT
Packing mechanical data
E
F
K0
P0
A0
B0
D
D1
P1
P2
R
T
W
TAPE MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
10.5
10.7
0.413 0.421
15.7
15.9
0.618 0.626
1.5
1.6
0.059 0.063
1.59
1.61
0.062 0.063
1.65
1.85
0.065 0.073
11.4
11.6
0.449 0.456
4.8
3.9
5.0
0.189 0.197
4.1
0.153 0.161
11.9
12.1
0.468 0.476
1.9
2.1
0.075 0.082
50 1.574
0.25
0.35 0.0098 0.0137
23.7
24.3
0.933 0.956
* on sales type
TAPE AND REEL SHIPMENT
G
N
T
A
B
C
D
REEL MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
330 12.992
1.5
0.059
12.8
13.2
0.504
0.520
20.2
0795
24.4
26.4
0.960
1.039
100 3.937
30.4
1.197
BASE QTY
1000
BULK QTY
1000
15/17
Revision history STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
Table 10.
Document revision history
Date Revision
14-Jan-2004
23-Aug-2005
04-Oct-2005
23-May-2007
22-Nov-2007
4
5
6
7
8
Changes
Initial electronic version
Inserted ecopack label
Modified header
Added
Figure 16: Maximum avalanche energy vs temperature
Figure 11: Capacitance variations
has been updated
16/17
STB6NK60Z - STB6NK60Z-1 - STP6NK60ZFP - STP6NK60Z
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
17/17
