Man & Machine Petite Mouse Specification

P e t t t i i i t t t e M o u s s e

This optical mouse is water-resistant (IP68 compliant) and great for medical, industrial, marine applications or any environment where dust, moisture or liquid is a concern. In addition to the left and right click buttons, it has three buttons in the middle which simulate a scroll wheel. Use them to scroll up, scroll down and scroll lock. The Petite

Mouse is smaller than most standard mice, and it is PS/2 and USB compatible. This five-button mouse is available in black or cool-gray, and can be sanitized and disinfected.

Weight:

121 g (0.27lb)

Dimensions:

110 x 58 x 40 mm

4.3 x 2.3 x 1.6 inch

Cable length:

1.83 m (6.0’)

Storage temperature:

-20 °C up to 70 °C

(-4 °F up to 158 °F)

Operating temperature:

0 °C up to 70 °C

(32 °F up to 158 °F)

Voltage:

5 Volt

Current input:

26 mA

Composition:

100% Silicone Rubber

PVC Cable

100% Latex free

System requirements:

USB interface

PS/2 compatible

(adaptor not included)

Guaranteed period:

Limited lifetime warranty

All Specifications are subject to change without notice.

Installing Your Petite Mouse

USB: Attach the mouse cable to a USB computer port. (You do not have to turn off your computer. There is no software to install.)

PS2: Turn off your computer before attaching the mouse. Attach the PS2 mouse adapter (sold separately) to USB cable connector. Attach cable to the mouse port. Turn on your computer to activate the mouse. (There is no software to install.)

You can email us at: [email protected] or call us at: (301) 341-4900

In Europe, contact +31-23-5450185 www.man-machine.com

Cleaning Instructions for Waterproof Keyboards and Mice:

1 .

.

Clean the surface of the product by wiping, brushing, spraying or dipping it. Use only rags, sponges or soft bristle brushes.

2 .

.

DO NOT place the USB or PS/2 connector into the fluid.

Either wipe with dry cloth or allow to air dry.

Disinfectants recommended for Sterilization:

•

Chlorine based (max 10% solution) – Chlorox, Novalsan, etc.

•

Formaldehyde based - Formaldehyde Solution 37%, Vinco

Formaldegen, etc.

•

Glutaraldehyde based – Aldacide 200, Lysofume, Wavicide, etc.

•

Phenol based – Lysol I.C., Beaucoup, Magna Clean, Tek-Trol, etc.

•

Alcohol based – Cavicide, Isopropyl Alcohol, Medicide, etc.

•

Oxidizing – Hydrogen Peroxide 3% Solution, Lifegard Series, etc.

•

Quaternary Ammonium – Roccal-D, Bacto-Sep, Parvosol, etc.

•

Soap and water

DO NOT USE:

•

Petroleum based cleaning fluids, such as Gasoline

•

Acetone

• Over 10% bleach solutions

• Temperature or pressure sterilization

•

Buffing pads or scrubbing pads

THESE INSTRUCTIONS AND RECOMMENDATIONS HAVE BEEN PREPARED

TO ADVISE THE PROPER METHODS FOR CLEANING YOUR PRODUCT.

MAN & MACHINE, INC. OR THE LOCAL DISTRIBUTOR CANNOT ASSUME ANY

RESPONSIBILITY FOR THE APPLICATION OF THEM. IF THERE ARE ANY

QUESTIONS, PLEASE CONTACT PLACE OF PURCHASE OR MMI PRIOR TO

CLEANING.

Copyright Man & Machine, Inc. 2008