LG ARX5 Owner’s Manual

ENGLISH
OWNER’S MANUAL
Audio/Video
Receiver
Please read this manual carefully before operating your set and
retain it for future reference.
Some of the content in this manual may differ from your unit.
MODEL
ARX5 (ARX5, S63S6-S, S75T1-W)
*MFL69146390*
LHR627-FE.DZAFLLK_ENG.indd 1
www.lg.com
Copyright © 2017 LG Electronics. All Rights Reserved
2017-04-11 �� 11:46:37
2
Getting Started
Safety information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
LHR627-FE.DZAFLLK_ENG.indd 2
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specification page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or fire. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
2017-04-11 �� 11:46:37
Getting Started
3
This device is equipped with a portable battery or
accumulator.
1
Getting Started
Safety way to remove the battery or the battery
from the equipment: Remove the old battery or
battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to human
and animal health, the old battery or the battery
put it in the appropriate container at designated
collection points. Do not dispose of batteries or
battery together with other waste. It is recommended
that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be
exposed to excessive heat such as sunshine, fire or
the like.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
LHR627-FE.DZAFLLK_ENG.indd 3
2017-04-11 �� 11:46:38
4
Table of Contents
Table of Contents
1
Getting Started
3
System Setting
2
6
6
6
6
7
8
10
11
Safety information
Unique features
Accessories
Introduction
– Symbols Used in this Manual
– Required cables
Remote control
Front panel
Rear panel
21
21
21
22
22
23
23
23
Settings and adjustments using the SETUP
menu
– SETUP configuration
– TESTTONE menu
– LEVEL menu
– DISTANCE menu
– A/V SYNC menu (Adjusting the audio delay)
– DOLBY DRC menu
– RESET menu
2
Connecting
4
Operating
12
13
13
14
15
15
17
18
19
20
20
Spekaer installation
Before connecting
Positioning the system
Attaching the speakers to the unit
Connecting TV with other devices
– Using an HDMI cable
– Using a composite video cable
Connecting audio devices
Connecting other devices
Connecting the antenna
Connecting portable devices
24
24
24
25
25
25
Selecting the input source
– By using the knob on the unit
– By using the remote control
USB Operation
– Basic Operations
– Selecting a folder and
an MP3/WMA file
– Deleting an MP3/WMA file
– Playing repeatedly or randomly
– To activate the mute function
– Playable file Requirement
– Playback effect
Enjoying various sound mode
– Setting the USER EQ
– LG Sound Sync
Using a BLUETOOTH® wireless technology
– Listening to music stored on the Bluetooth
devices
– Using the Music Flow Bluetooth App
– Activate Bluetooth with “Music Flow
Bluetooth” App
Radio Operations
– Listening to FM radio
– Improving poor FM reception
– Presetting the Radio Stations
– Deleting all the saved stations
26
26
26
27
27
30
30
31
32
32
34
35
36
36
36
36
36
LHR627-FE.DZAFLLK_ENG.indd 4
2017-04-11 �� 11:46:38
Table of Contents
37
37
37
37
37
37
38
38
Other Operations
– Dimmer
– Using the Sleep Timer
– Displaying file and input source
– Auto power down
– AUTO POWER On/Off
Advanced Operations
– Recording to USB
5
1
5
Troubleshooting
39
Troubleshooting
6
Appendix
2
40
Controlling a TV with the Supplied Remote
Control
– Setting up the remote to control your TV
Trademarks and licenses
Maintenance
– Handling the unit
Specifications
3
40
41
41
41
42
4
5
6
LHR627-FE.DZAFLLK_ENG.indd 5
2017-04-11 �� 11:46:38
6
Getting Started
Unique features
1
Bluetooth®
Accessories
Please check and identify the supplied accessories.
Getting Started
Listens to music stored on your Bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc.)
Remote control (1)
Battery (1)
FM antenna (1)
Speaker cables (4)
Playback effects
Listens to music various sound and playback effects.
USB Direct Recording
Records music to your USB device. (analog sources
only.)
Music Flow Bluetooth
Introduction
Music Flow Bluetooth is an App designed to let you
take control of some of LG’s latest Audio devices.
Refer to the page 34-35.
Symbols Used in this Manual
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
LHR627-FE.DZAFLLK_ENG.indd 6
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
2017-04-11 �� 11:46:38
Getting Started
Required cables
7
yy HDMI cable
The hookup diagrams on the subsequent pages
assume the use of the following connection cables.
yy Analog audio cable
1
yy Portable cable (
3.5 mm Stereo plug)
Getting Started
You must purchase the connection cables separately
if necessary.
White (L)
Red (R)
,,Note
yy Turn off the power to all components before
making any connections.
yy Composite video cable
Yellow
yy Analog audio/Composite video cable
Yellow (Video)
White (L/audio)
Red (R/audio)
yy When connecting an audio/video cable, be
sure to match the color-coded pins to the
appropriate jacks on the components:
yellow (video) to yellow; white (left, audio) to
white; and red (right, audio) to red.
yy When connecting optical digital cables, insert
the cable plugs straight in until they click into
place.
yy Do not bend or tie optical digital audio cables.
yy Optical digital audio cable
LHR627-FE.DZAFLLK_ENG.indd 7
2017-04-11 �� 11:46:39
8
Getting Started
Remote control
• • • • • • • • • • • • • • a• • • • • • • • • • • • • •
DJ EFFECT : Selects a desired DJ EFFECT. (Refer to
page 28.)
1 : Switches the unit ON or OFF.
1
Getting Started
SLEEP : Sets dimmer or the system to turn off
automatically at a specified time.
AUTO DJ : Selects the AUTO DJ mode. (For more
information refer to the page 28.)
JUKE BOX :
-- Selects JUKE BOX mode.
-- Makes your favorites list.
INFORMATION :
-- Displays the information of a file or an input
source.
-- Sees the name of connected all Bluetooth device
in Bluetooth mode.
FUNCTION : Selects the function and the input
source.
DELETE :
-- Deletes MP3/WMA files or folders.
-- Deletes a song on JUKE BOX list.
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
ENTER/SET : Acknowledges menu selection.
PRESET/FOLDER (-/+) :
-- Selects a preset stations.
-- Searches a folder on USB device.
TUNING (-/+) : Tunes in the desired radio station.
W/S/A/D (up/ down/ left/ right): Selects an
option in the menu.
BACK : Moves backwards in the menu or exits the
setup menu.
SETUP : Displays or exits the [SETUP] menu.
Replacement of battery
AA
A(R
03
)
Remove the battery cover on the rear of the Remote
Control, and insert the battery with 4 and 5
matched correctly.
LHR627-FE.DZAFLLK_ENG.indd 8
2017-04-11 �� 11:46:39
Getting Started
9
• • • • • • • • • • • • • • c• • • • • • • • • • • • • •
• • • • • • • • • • • • • • e• • • • • • • • • • • • • •
Z : Stops playback.
0 to 9 numerical buttons :
-- Selects numbered options in a menu.
-- Selects numbered tracks, files, or preset number.
d MONO/STEREO :
-- Starts playback.
-- Selects MONO/STEREO in FM mode.
C/V : Goes to the next or previous file.
c/v : Searches backward or forward.
• • • • • • • • • • • • • • d• • • • • • • • • • • • • •
AUTO POWER : Turns on or off AUTO POWER
function. (Refer to the page 37.)
TV Control Buttons : Refer to the page 40.
1
Getting Started
M : Pauses playback.
REPEAT : Listens to your files repeatedly or randomly.
SPEAKER LEVEL : Sets the sound level of desired
speaker.
VOL (-/+) : Adjusts speaker volume.
BASS BLAST : Selects the BASS BLAST sound mode
directly.
SOUND EFFECT : Selects a sound effect mode.
: Turns off the sound temporarily. Press the button
again to restore the sound.
INPUT buttons : Selects the input source you want to
use. (For more information refer to the page 24.)
-- AUX : Selects the input source connected to AUX
IN 1/2(L/R) jack.
-- PORT.IN : Selects the input source connected to
PORT.IN jack.
-- OPTICAL : Selects the input source connected to
OPTICAL IN jack.
-- HDMI IN : Selects the input source connected to
HDMI IN 1/2/3 jack.
-- USB : Selects the input source connected to USB
port.
-- BLUETOOTH : Selects Bluetooth function.
-- RADIO : Selects the FM tuner.
X REC : USB direct recording. (Refer to the page 38.)
LHR627-FE.DZAFLLK_ENG.indd 9
2017-04-11 �� 11:46:39
10 Getting Started
Front panel
1
a
b
c
d
e
f
g
Getting Started
l
k
j
i
h
a 1/! (STANDBY/ON)
Switches the unit ON or OFF.
g USB port (5 V 0 500 mA)
Connects an USB device to USB port.
b BASS BLAST
Selects the BASS BLAST sound mode directly.
h MASTER VOLUME
Adjusts the speaker volume.
c Remote sensor
i CONTROL
-- Control the DJ EFFECT and DJ PRO.
-- Adjust USER EQ sound level. (For more
information refer to the page 30.)
d Display window
Shows the current status of the unit.
e DJ EFFECT
Selects DJ effect. (For more information refer to
the page 28.)
f USER EQ
Sets the USER EQ mode (BASS, MIDDLE and
TREBLE). (For more information refer to the page
30.)
ENTER
-- Acknowledges menu selection.
-- Enters USER EQ/ Confirms USER EQ setting.
(For more information refer to the page 30.)
j DJ PRO
Selects DJ PRO effect. (For more information
refer to the page 27.)
k SOUND EFFECT
Selects Sound effect.
l INPUT SELECTION
Selects input source.
PLAY/PAUSE
-- Starts playback.
-- Pauses playback, press it again to exit pauses
status.
-- Selects BASS, MIDDLE or TREBLE while in
"USER EQ" mode by pressing PLAY/PAUSE
repeatedly.(For more information refer to the
page 30.)
STOP
Stops playback.
LHR627-FE.DZAFLLK_ENG.indd 10
2017-04-11 �� 11:46:39
Getting Started 11
Rear panel
a
b
c
d
1
Getting Started
k
a SPEAKERS
Connects the speaker cables.
b AUX IN 1/2 (L/R)
Connects to external source with 2 channel audio
outputs.
c LINE OUT (L/R)
Connects the components with 2 channel audio
inputs.
j
i
h gf e
i DIGITAL AUDIO IN
OPTICAL
Connects other components with an optical
digital audio output.
j HDMI IN 1/2/3
Connects the component with HDMI output.
k HDMI OUT TO TV
Connects to TV with HDMI inputs.
d Power cord
e ANTENNA
FM – Connects the FM wired antenna.
f VIDEO OUT
Connects the components with analog video
input jacks.
g VIDEO IN
Connects the components with analog video
output jacks.
h PORT. IN
Connects a portable device (MP3 player, etc) to
PORT. IN jack.
LHR627-FE.DZAFLLK_ENG.indd 11
2017-04-11 �� 11:46:40
12 Connecting
Spekaer installation
B. Wall type (Mounting the speakers to a Wall)
A. Stand type
You can adjust angle of speaker.
2. Attach the stand to the speaker as shown below.
1. Separate the stand from the speaker.
3. You can adjust angle of speaker.
4. Fix the stand to the speaker by rotating the
screw.
5. Drive 1 screw in the wall for the speaker and then
hook the speaker over there.
2
3
4
5
Connecting
2
yy Separates stand
Separate the stand from the speaker as
shown below.
LHR627-FE.DZAFLLK_ENG.indd 12
2017-04-11 �� 11:46:40
Connecting 13
Before connecting
Please make sure to disconnect the AC power cord
before making any connection between the unit and
any other device.
Positioning the system
For the best possible surround sound, all the speakers
other than the subwoofer should be placed at the
same distance from the listening position ( ).
Rear speaker (L)
Rear speaker (R)
Place these speakers behind your listening position,
facing slightly inwards.
Subwoofer (1)
Subwoofer (2)
The position of the subwoofer is not so critical,
because low bass sounds are not highly directional.
But it is better to place the subwoofer near the front
speakers. Turn it slightly toward the center of the
room to reduce the wall reflections.
2
Connecting
The following illustration shows an example of
positioning the system. Note that the illustrations
in these instructions differ from the actual unit for
explanation purposes.
Front speaker (L)
Front speaker (R)
Place the front speakers to the sides of the monitor
or screen and as flush with the screen surface as
possible.
Unit
LHR627-FE.DZAFLLK_ENG.indd 13
2017-04-11 �� 11:46:42
14 Connecting
Attaching the speakers
to the unit
2
Connecting
1. Connect the wires to the unit.
Match each wire’s colored band to the same
colored connection terminal on the rear of the
unit. To connect the cable to the unit, press
each plastic finger pad to open the connection
terminal. Insert the wire and release the finger
pad.
Color
Speaker
Position
Grey
REAR R
Rear right
Blue
REAR L
Rear left
Orange
WOOFER 1
Any front position
Orange
WOOFER 2
Any front position
Red
FRONT R
Front right
White
FRONT L
Front left
To connect the cable to the speakers, press each
plastic finger pad to open the connection terminals
on the base of each speaker. Insert the wire and
release the finger pad.
>>Caution
yy Check the volume level before playing music
to prevent infirm, child, and pregnant women
from being shocked by the sudden and loud
sound from the unit.
Connect the black stripe of each wire to the
black finger pad and the other end to the colored
finger pad.
Connect a woofer cord to the unit. When
connecting a woofer cord to the unit, insert the
connector until it clicks.
yy Do not use the unit in a limited space. It may
damage a person’s hearing. It is recommended
to use it in a wide space.
yy Be careful to make sure children not to put
their hands or any objects into the opening
speaker duct hole.
yy The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
yy Use the speaker supplied with this unit
only. Using any other speaker may cause
malfunction.
yy Before using the subwoofer, remove the
protective vinyl.
2. Connect the wires to the speakers.
Connect the other end of each wire to the correct
speaker according to the color coding:
LHR627-FE.DZAFLLK_ENG.indd 14
2017-04-11 �� 11:46:42
Connecting 15
Connecting TV with
other devices
1. Connect the HDMI IN 1/2/3 jack on AV Receiver
System to your video device with HDMI OUT jack
using HDMI cable.
You can watch the input image from your video
device. There are two ways of connecting your video
device to AV Receiver System.
3. Set the input source to HDMI (refer to the page
24).
Using an HDMI cable
2
Connecting
Since HDMI offers both audio and video signal over
one cable, you can enjoy them without additional
audio cable.
2. Connect the HDMI OUT TO TV jack on AV
Receiver System to the HDMI IN jack on your TV.
DVD, Blu-ray disc player etc.
HDMI cable
HDMI cable
TV
LHR627-FE.DZAFLLK_ENG.indd 15
2017-04-11 �� 11:46:42
16 Connecting
,,Note
yy HDMI is the abbreviated name for High
Definition Multimedia Interface. It is an
interface which transmits video and audio
signals in digital format. If a connected HDMI
device does not accept the audio output of
the unit, the HDMI device’s audio sound may
be distorted or may not output.
2
yy When you connect a HDMI or DVI compatible
device make sure of the followings :
Connecting
-- Try switching off the HDMI/DVI device and
this unit. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this unit.
-- The connected device’s video input is set
correctly for this unit.
-- The connected device is compatible with
720 x 576i (or 480i), 720 x 576p (or
480p), 1280 x 720p, 1920 x 1080i or
1920 x 1080p video input.
-- This unit does not support 4K device
normally. So if you use 4K device, please
connect to TV directly.
yy Not all HDCP-compatible HDMI or DVI devices
will work with this unit.
yy The picture will not be displayed properly with
non-HDCP device.
yy This unit does not playback and TV screen is
changed to black screen.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft)).
yy Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off
the unit and then turn it on again.
yy When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
yy When DTS source is connected through HDMI
IN jacks, the external device will convert from
DTS source to PCM.
LHR627-FE.DZAFLLK_ENG.indd 16
2017-04-11 �� 11:46:42
Connecting 17
Using a composite video cable
To enjoy both sounds and pictures from your device,
you have to connect analog audio cable as well as
composite video cable.
1. Connect the VIDEO IN jack on AV Receiver
System to the VIDEO OUT jack on your video
device using a composite video cable.
2. Connect the AUX IN 1/2 (L/R) jacks of AV
Receiver System to the left and right AUDIO OUT
jacks on your video device using an audio cables.
3. Connect the VIDEO OUT jack on your AV
Receiver System to the VIDEO IN jack on your TV.
DVD, Blu-ray
disc player etc
4. Set the input source to AUX1/2 (refer to the
page ���).
yy When connecting an audio/video cable, be
sure to match the color-coded pins to the
appropriate jacks on the components: yellow
(video) to yellow; white (left, audio) to white;
and red (right, audio) to red.
2
Connecting
Audio cable
Video cable
,,Note
yy When both the VIDEO IN and VIDEO OUT
jacks are connected, the video signals can be
output from the VIDEO OUT jack, even if this
unit has been turned off.
TV
LHR627-FE.DZAFLLK_ENG.indd 17
Video
cable
2017-04-11 �� 11:46:42
18 Connecting
Connecting audio
devices
1. Connect AUX1/2 IN (L/R), OPTICAL jack on AV
Receiver System to your audio device’s OUTPUT
jack you want.
You can hear the sound from your TV, DVD player,
Blu-ray player, CD player, etc.
2
It is not necessary to connect all the cables. Connect
AV Receiver System to an AUX, an OPTICAL jack on
your device you want to connect.
2. Set the input source to AUX 1/2 or OPTICAL you
connect (Refer to the page 24).
,,Note
Connecting
yy When connecting an audio/video cable, be
sure to match the color-coded pins to the
appropriate jacks on the components: yellow
(video) to yellow; white (left, audio) to white;
and red (right, audio) to red.
yy When connecting OPTICAL jack, DTS is not
output.
Audio
cable
Optical cable
or
DVD, Blu-ray disc player
etc.
LHR627-FE.DZAFLLK_ENG.indd 18
TV
2017-04-11 �� 11:46:43
Connecting 19
Connecting other
devices
1. Connect the LINE OUT jacks on AV Receiver
System to your device's INPUT jack you want
You can connect various devices (TV, recorder, etc) to
the jacks on AV receiver system.
Refer to "Connecting audio devices" and "Connecting
portable device" when you connect external device.
TV, VCR,
Recorder, etc
,,Note
yy When connecting an audio/video cable, be
sure to match the color-coded pins to the
appropriate jacks on the components: yellow
(video) to yellow; white (left, audio) to white;
and red (right, audio) to red.
yy It is only output analog signal. (FM, portable,
or AUX1/2)
Audio cable
2
Connecting
Or
2. Set the input source to FM, PORT.IN or AUX1/2
you connect (Refer
�����������������������
to the page 24).
yy When you connect to a TV by using only
audio cable, TV AV setup menu may not be
activated (It depends on TV models). But
audio will be outputted normally.
yy The sound through LINE OUT (L/R) is output
only original sound.
LHR627-FE.DZAFLLK_ENG.indd 19
2017-04-11 �� 11:46:43
20 Connecting
Connecting the antenna
1. Connect the FM wire antenna to the FM antenna
connector.
FM antenna
Connecting portable
devices
1. Connect the PORT. IN jack on the rear panel of
AV Receiver System to LINE OUT jack on your
portable device (MP3 player, etc.) using a portable
cable ( 3.5 mm stereo plug).
2
Connecting
2. Set the input source to FM tune (refer to the
page 24).
Portable cable
,,Note
Be sure to fully extend the FM wire antenna.
MP3 player etc.
2. Set the input source to PORTABLE (refer to the
page 24).
LHR627-FE.DZAFLLK_ENG.indd 20
2017-04-11 �� 11:46:43
System Setting 21
Settings and
adjustments using the
SETUP menu
TESTTONE menu
By using the SETUP menus, you can make various
adjustments to customize the unit.
2. Press ENTER/SET.
SETUP configuration
SETUP
1 TESTTONE
2 LEVEL
FRONT L : - 6 to + 6
FRONT R : - 6 to + 6
SURROUND R : -6 to +6
SURROUND L : -6 to +6
SUB WOOFER : - 40 to + 6
3 DISTANCE
FRONT L : 0 M to 6.0 M
FRONT R : 0 M to 6.0 M
SURROUND R : 0 M to 6.0 M
SURROUND L : 0 M to 6.0 M
SUB WOOFER : 0 M to 6.0 M
4 A/V SYNC
0 MS to 300 MS
"1 TESTTONE" appears on the display window.
The test tone is emitted from each speaker in
sequence as follows:
TESTING FRONT L TESTING FRONT R
TESTING SURROUND R TESTING SURROUND
L TESTING SUB WOOFER
You can select desired speakers manually by
pressing W/S repeatedly
3. You can verify each speakers tone.
4. Press BACK to move to the previous menu.
Press SETUP to exit the setup menu.
3
OFF
ON
5 DOLBY DRC
6 RESET
1. Press SETUP.
System Setting
TESTING FRONT L
TESTING FRONT R
TESTING SURROUND R
TESTING SURROUND L
TESTING SUB WOOFER
You can adjust the speaker levels while listening to
the test tone from your listening position.
1 : YES 2 : NO
LHR627-FE.DZAFLLK_ENG.indd 21
2017-04-11 �� 11:46:43
22 System Setting
LEVEL menu
DISTANCE menu
You can adjust the level of each speaker to suit your
preference.
You can set the distance of the speakers connected
to this unit.
1. Press SETUP.
1. Press SETUP.
"1 TESTTONE" appears on the display window.
2. Press W/Srepeatedly until “2 LEVEL” appears,
then press ENTER/SET.
2. Press W/S repeatedly until “3 DISTANCE"
appears, then press ENTER/SET.
3. Press W/S repeatedly until the desired speaker
appears.
3. Press W/S repeatedly until the desired speaker
appears.
Display
3
"1 TESTTONE" appears on the display window.
Description
Display
Description
System Setting
FRONT L
Front left speaker (-6 to +6)
FRONT L
Front left speaker (0 M to 6.0 M)
FRONT R
Front right speaker (-6 to +6)
FRONT R
Front right speaker (0 M to 6.0 M)
SURROUND R
Rear right speaker (-6 to +6)
SURROUND R
Rear right speaker (0 M to 6.0 M)
SURROUND L
Rear left speaker (-6 to +6)
SURROUND L
Rear left speaker (0 M to 6.0 M)
SUB WOOFER
Subwoofer (-40 to +6)
SUB WOOFER
Subwoofer (0 M to 6.0 M)
4. Press A/D to adjust the level of each speaker.
4. Press A/D to set the distance of the speakers.
5. Press BACK to move to the previous menu.
Press SETUP to exit the setup menu.
5. Press BACK to move to the previous menu.
Press SETUP to exit the setup menu.
You can adjust speaker level directly by pressing
SPEAKER LEVEL on the remote control.
Adjusting the speaker levels
You can adjust the level of each speaker. These
settings are applied to all sound fields. You can adjust
from - 6 to + 6(Subwoofer - 40 to + 6).
1. Press SPEAKER LEVEL on the remote control.
and press W/S repeatedly until the desired
speaker appears.
The display changes cyclically in the display
window as follows.
FRONT L FRONT R SURROUND R
SURROUND L SUB WOOFER
2. Press A/D to adjust the level of each speaker.
3. Repeat and adjust the sound level of the other
speakers.
LHR627-FE.DZAFLLK_ENG.indd 22
2017-04-11 �� 11:46:43
System Setting 23
A/V SYNC menu (Adjusting the
audio delay)
You can delay the sound output using this function
when the image is slower than the sound.
1. Press SETUP.
"1 TESTTONE" appears on the display window.
2. Press W/Srepeatedly until “4 A/V SYNC”
appears, then press ENTER/SET.
3. Press A/D to adjust the delay between sound
and image.
You can adjust from 0 MS to 300 MS in 10 MS
steps.
,,Note
You may not be able to adjust the delay between
sound and image perfectly using this function.
This allows you to initialize settings you have made in
the SETUP menu.
1. Press SETUP.
"1 TESTTONE" appears on the display window.
2. Press W/Srepeatedly until “6 RESET” appears,
then press ENTER/SET.
“1 : YES 2 : NO” appears on the display window.
3. Press the numeric 1 to reset the unit to its
original settings.
If you don't want to reset it, press the numeric 2.
4. Press BACK to move to the previous menu.
Press SETUP to exit the setup menu.
3
System Setting
4. Press BACK to move to the previous menu.
Press SETUP to exit the setup menu.
RESET menu
DOLBY DRC menu
This function allows you to listen to a movie at a
lower volume without losing clarity of sound. You
can compress the dynamic range of the Dolby Digital
audio output.
1. Press SETUP.
"1 TESTTONE" appears on the display window.
2. Press W/Srepeatedly until “5 DOLBY DRC”
appears, then press ENTER/SET.
3. Press A/D to set the DRC.
- DOLBY DRC OFF : Deactivates this function.
- DOLBY DRC ON : Activates this function.
4. Press BACK to move to the previous menu.
Press SETUP to exit the setup menu.
,,Note
Audio dynamic range compression lets you
compress the dynamic range of the soundtrack
based on the dynamic range information
included in the Dolby Digital signal.
LHR627-FE.DZAFLLK_ENG.indd 23
2017-04-11 �� 11:46:43
24 Operating
Selecting the input
source
This section explains how to select the input source
(i.e., the AUX component that you want to listen.).
It is necessary to connect the equipment you want to
enjoy such as DVD, Blu-ray disc player, USB etc.
By using the knob on the unit
1. Press 1/! (STANDBY/ON) on the unit.
2. Select a source by using INPUT SELECTION
on the unit. The selected source appears on the
display window.
To select
4
Display
(Function)
Operating
Component connected to AUX IN 1
jack
AUX 1
Component connected to AUX IN 2
jack
AUX 2
Portable device connected to PORT. IN
jack
PORTABLE
Connect Bluetooth device to unit.
BLUETOOTH
LG TV that is supported LG Sound
Sync (Wireless)
LG TV
Component connected to HDMI IN 1
jack
HDMI IN 1
Component connected to HDMI IN 2
jack
HDMI IN 2
Component connected to HDMI IN 3
jack
HDMI IN 3
Component connected to OPTICAL IN
jack
OPTICAL
FM radio
FM
USB device connected to USB
port
USB
LHR627-FE.DZAFLLK_ENG.indd 24
By using the remote control
1. Press 1 on the remote control.
2. Select a source by pressing the button on the
remote control once or repeatedly.
To select
Button
Component connected to AUX 1/2
AUX
Portable device connected to PORT. IN
jack
PORT.IN
Component connected to OPTICAL IN
jack
OPTICAL
Component connected to HDMI
1/2/3 jack
HDMI IN
USB device connected to USB port
USB
Bluetooth device connected to unit.
BLUETOOTH
FM radio
RADIO
2017-04-11 �� 11:46:43
Operating 25
USB Operation
Selecting a folder and
an MP3/WMA file
Basic Operations
1. Press W/S repeatedly until a desired folder
appears.
1. Connect the USB device to the USB port.
2. Press d to play it. The first file of folder will play.
,,Note
yy USB Folders/Files are recognized as below.
2. Select the USB function by rotating INPUT
SELECTION on the unit or pressing USB on the
remote control.
Operating
Do this
Press Z on the remote control or
Stop
STOP on the unit.
Press d on the remote control or
Playback
PLAY/PAUSE on the unit.
Press M on the remote control or
Pause
PLAY/PAUSE on the unit during
playback.
Searching Press c/v on the remote
for a section control during playback and release
within a file it at the point you want to listen to.
Press 0 to 9 numerical buttons on
Selecting a file
the remote control to go to the
directly
desired file directly.
4
To
Press C/V to go to the next
Skipping to file or to return to the beginning of
the next/ the current file.
previous file Press C twice briefly to step back
to the previous file.
LHR627-FE.DZAFLLK_ENG.indd 25
yy If there is no file in a folder, the folder will not
appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3 FOLDER
7 FOLDER 8 FOLDER 5 FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
yy *ROOT : The first screen you can see when a
computer recognize the USB is “ROOT”.
2017-04-11 �� 11:46:44
26 Operating
Deleting an MP3/WMA file
Playing repeatedly or randomly
You can delete file, folder or format by pressing
DELETE. This function is supported only in stop
status. (USB only)
During playback, press
select a desired mode.
1. -Select the file or folder you want to delete and
press DELETE.
Display
Description
REPEAT TRK
The current file will be played
repeatedly.
Or
REPEAT DIR
All the files in Directory will be
played repeatedly.
Press DELETE repeatedly during selecting the
MP3/WMA file.
REPEAT ALL
All the files in device will be
played repeatedly.
-Press and hold DELETE to format the USB
device.
The display changes in the following order.
- DEL FILE? : Deletes file
- DEL FOLDER? : Deletes folder
- FORMAT? : Formats USB
2. To delete file/folder or format, press d.
4
REPEAT repeatedly to
3. If you want to exit the current mode, press Z.
Operating
>>Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to prevent
data loss.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
LHR627-FE.DZAFLLK_ENG.indd 26
RANDOM
OFF
The files will be played in
random order.
Returns to normal playback.
To activate the mute function
Press on the remote control. "
display window.
" appears on the
To cancel, press on the remote control again or
change the volume level by using VOL -/+ on the
remote or rotating MASTER VOLUME on the front
panel.
2017-04-11 �� 11:46:44
Operating 27
Playable file Requirement
Playback effect
Music file requirement
The unit supports various sound and playback
effects : DJ PRO, AUTO DJ, DJ EFFECT, and JUKE BOX
playback.
MP3/WMA file compatibility with this unit is limited
as follows.
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Maximum files : Under 2000
yy Maximum folders : Under 200
yy File extensions : “.mp3”/ “.wma”
DJ PRO
It allows you to mix CLUB, DRUM or SCRATCH sound
effect. CLUB and DRUM have up to 6 sounds effect.
Turn DJ PRO clockwise or counterclockwise to select
a desired DJ PRO sound effect.
And then, turn CONTROL clockwise or
counterclockwise.
,,Note
yy Initial DJ PRO mode is DJ PRO OFF.
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :
Devices that support USB2.0 or USB1.1.
yy DJ PRO mode is displayed for 3 seconds
when you rotate DJ PRO (CLUB, DRUM or
SCRATCH).
yy The USB function of this unit does not support all
USB devices.
yy The currently playing DJ PRO sound is
stopped and the selected DJ PRO sound
outputs if you select a different DJ PRO
sound effect while DJ PRO sound is playing.
USB device requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than a
few minute to be searched.
yy The functions supported by DJ PRO
are RADIO, USB, AUX1/2, PORTABLE,
BLUETOOTH, and LG TV.
4
Operating
Compatible USB Devices
yy You can hear effect of scratch sound
depending on the direction in which you
rotate CONTROL.
yy To prevent data loss, back up all data.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy Using NTFS file system is not supported.
(Only FAT (16/32) file system is supported.)
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
LHR627-FE.DZAFLLK_ENG.indd 27
2017-04-11 �� 11:46:44
28 Operating
DJ EFFECT
AUTO DJ playback
It allows you to enjoy DJ EFFECT such as FLANGER/
PHASER/WAH/DELAY sound effect.
Auto DJ blends the end of one song into the
beginning of another for seamless playback. It
equalizes volume across files for uninterrupted
playback.
1. Press DJ EFFECT to select a desired DJ EFFECT
(FLANGER, PHASER, WAH, DELAY, OFF).
2. Turn CONTROL clockwise or counterclockwise to
adjust the DJ EFFECT level between 0 to 15.
You can also adjust the DJ EFFECT level by
pressing A/D on the remote control.
,,Note
yy The DJ EFFECT mode is displayed for 3
seconds when a DJ EFFECT Key is inputted.
yy The current gage level is displayed when
adjusting gage.
yy If the function changed or the unit is turned
off and on, DJ EFFECT mode with DJ EFFECT
is turned off.
4
Press AUTO DJ on the remote control repeatedly, the
display changes as followings. RANDOM (AUTO DJ
RANDOM) -> REPEAT ALL (AUTO DJ SEQUENTIAL)
-> (AUTO DJ OFF)
Mode
Display
Window
Description
OFF
(AUTO DJ OFF)
-
RANDOM
RANDOM
(AUTO DJ
RANDOM)
The music is played
randomly on this
mode.
REPEAT
REPEAT ALL
(AUTO DJ
SEQUENTIAL)
The music is played
repeatedly on this
mode.
Operating
,,Note
yy It is not supported on the AUTO DJ mode to
search for a section within a file or to play
repeatedly or randomly.
yy If you move to other functions or stop the
music using STOP on the unit (or Z on the
remote control) on AUTO DJ mode, AUTO DJ
function will be disable.
yy AUTO DJ function is not supported in the
music file whose length is less than 60
seconds.
yy Only AUTO DJ SEQUENTIAL is selected when
played JUKE BOX list.
yy You can only use AUTO DJ playback when
using USB playback.
LHR627-FE.DZAFLLK_ENG.indd 28
2017-04-11 �� 11:46:44
Operating 29
JUKE BOX Playback
(Program play)
JUKE BOX function enables you to make a playlist of
your favorite files from a USB device. A playlist of up
to 100 files can be entered.
Making JUKE BOX list
It is supported only on stop status.
1. Press and hold JUKE BOX to enter the edit mode.
2. Select a file by pressing C/V on the
remote control.
3. Press JUKE BOX to save the file.
4. Repeat 2 to 3 to store the other files.
(You can modify the list by pressing W/S to
select the JUKE BOX program number.)
5. Press JUKE BOX once again.
To play the JUKE BOX list, press d after you make the
list.
Press JUKE BOX twice on stop status. “JUKE BOX
ON” appears on the display window. To play JUKE BOX
list, press d on the remote control or PLAY/ PAUSE
on the unit.
Deleting function is worked only on the edit mode.
Refer to “Making JUKE BOX list” step 1.
1. Select a song by pressing JUKE BOX repeatedly
or pressing W/S.
2. Press DELETE while a song is selected.
,,Note
yy To check the status of JUKE BOX, press JUKE
BOX once. You can also check it by the word
“PROG.” on the display window.
yy If there is no JUKE BOX list, “JUKE BOX
NONE” appears on the display window when
you press JUKE BOX.
yy JUKE BOX is switched off in the case below.
-- Changing the function to the others.
-- Turning off and on the unit.
-- Operating the numeric buttons on the
remote control.
yy JUKE BOX list is cleared in the case below.
-- Removing the USB device.
-- Deleting or recording music files in the USB
device.
yy You can only use JUKE BOX playback when
using USB playback.
4
Operating
Enjoying JUKE BOX
Deleting JUKE BOX list
To cancel it, press JUKE BOX twice. “JUKE BOX OFF”
appears on the display window.
LHR627-FE.DZAFLLK_ENG.indd 29
2017-04-11 �� 11:46:44
30 Operating
Enjoying various sound
mode
Display
Local
specialization
equalizer
Regionally optimized sound
effect. (ARABIC/ PERSIAN/
INDIA/ AFRO(AFRO Hip Hop))
MUSIC
You can enjoy comfortable and
natural sound.
CINEMA
You can enjoy more immersive
and cinematic surround sound.
You can listen to music with desired sound effect by
adjusting the BASS, MIDDLE and TREBLE.
POP
1. Press USER EQ on the front panel.
“USER EQ” appears on the display window.
JAZZ
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual pop,
classic, jazz or rock concert.
You can enjoy various sound mode. For details, refer
to "Setting the USER EQ", "Sound effect" and "Bass
Blast".
Setting the USER EQ
2. Press ENTER on the front panel while the “USER
EQ” is displayed in the display window.
CLASSIC
ROCK
VOICE
This mode makes voice sound
clear, improving the quality of
voice sound.
4. Rotate CONTROL on the front panel to set
sound level.
BASS BLAST
During playback, reinforces the
bass sound.
5. Press ENTER on the front panel to finish the
settings.
FOOTBALL
You can enjoy the sound effect
FOOTBALL STADIUM.
Sound effect
STANDARD
You can enjoy optimized sound.
3. Select the BASS, MIDDLE or TREBLE by pressing
PLAY/PAUSE on the front panel.
4
Description
Operating
This system has a number of preset sound effects.
You can select a suitable sound effect. Press SOUND
EFFECT on the remote control or rotate SOUND
EFFECT on the front repeatedly until the desired
sound effect appears on the display window.
,,Note
yy In some of surround modes, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
yy By pressing BASS BLAST you can directly
select BASS BLAST effect.
LHR627-FE.DZAFLLK_ENG.indd 30
2017-04-11 �� 11:46:44
Operating 31
LG Sound Sync
With wireless connection
1. Turn on the unit by pressing 1 (Power) on the
remote control.
You can control some functions of this unit by
your TV's remote control with LG Sound Sync. It is
compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo on
your TV.
Controllable function by LG TV's remote control :
Volume up/down, mute
Refer to the TV's instruction manual for the details
of LG Sound Sync.
,,Note
yy You can also use the remote control of this
unit while using LG Sound Sync. If you use TV's
remote control again, the unit synchronizes
with the TV.
yy Make sure of the condition of this unit and
the connection in the cases below when using
LG Sound Sync.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Wireless)]
When the TV is not connected, “LG TV READY”
appears on the display window. If the TV and this
unit are connected normally, “LG TV PAIRED” will
be appear on the display window.
,,Note
If you turned off the unit directly by pressing
1 (Power), LG Sound Sync (Wireless) will be
disconnected. To use this function again, you
should reconnect the TV and the unit.
4
Operating
yy If the connection fails, check the conditions of
this unit and your TV : power, function.
2. Select the input source to LG TV by pressing
FUNCTION button repeatedly.
-- Turn off the unit.
-- Changing the function to the others.
-- Disconnecting the wireless connection
caused by interference or a distance.
yy The amount of time to turn off this unit is
different depending on your TV when you set
AUTO POWER function to ON.
yy Details of TV setting menu vary depending on
the models of your TV.
yy If you connect LG Sound Sync when “Music
Flow Bluetooth” app is connected, control
through the app is available.
yy If an LG TV is connected when using
Bluetooth, Bluetooth is disconnected and the
LG TV is connected.
yy The volume may be increased when the TV
and this unit is connected by LG Sound Sync.
LHR627-FE.DZAFLLK_ENG.indd 31
2017-04-11 �� 11:46:44
32 Operating
Using a BLUETOOTH®
wireless technology
About Bluetooth
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
Available Devices : Mobile phone, MP3, Laptop, PDA.
4
Bluetooth Profiles
Operating
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles. This
unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Codec : SBC
Listening to music stored on the
Bluetooth devices
Before you start the pairing procedure, make sure the
Bluetooth feature is turned on in to your Bluetooth
device. Refer to your Bluetooth device’s user guide.
Once a pairing operation is performed, it does not
need to be performed again.
1. Turn on the unit.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as “LG ARX5(XX)".
,,Note
yy XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG
ARX5(08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
yy You can connect this unit with up to 3
Bluetooth device simultaneously same
method as above description.
yy The multi pairing connection is only supported
on Android devices. (Multi pairing connection
may not be supported depending on the
connected device specifications.)
yy Removable/detachable Bluetooth device
(Ex : Dongle etc..) doesn't supported multi
pairing.
3. When this unit is successfully connected with
your Bluetooth device, “BLUETOOTH PAIRED”
appears on the display window and change to
Bluetooth device name soon.
,,Note
yy "BLUETOOTH PAIRED" will momentarily
appear on the display when you connect
other devices for multi pairing.
yy If the device name is unavailable, “_” will be
displayed.
LHR627-FE.DZAFLLK_ENG.indd 32
2017-04-11 �� 11:46:45
Operating 33
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
,,Note
yy When using Bluetooth® technology, you
have to make a connection between the unit
and the Bluetooth device as close as possible
and keep the distance.
However it may not work well in the case
below :
-- There is a obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy You should connect your Bluetooth device to
this unit again when you restart it.
yy When this unit connected with multiple
Bluetooth devices, only one device which
you are playing keeps Bluetooth connection
when you change the function to the others.
yy The sound may be interrupted when the
connection has interference from other
electronic devices.
LHR627-FE.DZAFLLK_ENG.indd 33
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc..
yy The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
yy When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yy When not connected the Bluetooth,
“BLUETOOTH” and “BLUETOOTH READY”
appears on the control panel.
yy When you use the BT function, adjust the
volume to a proper level on the Bluetooth
device.
yy If it is not in the BT function, only one device
can be connected.
4
Operating
yy Even if this unit connected up to 3 Bluetooth
devices, you can play and control music by
using only one of the connected devices.
,,Note
yy You may not control the Bluetooth device
with this unit.
yy If a Bluetooth device is connected when
using LG TV, LG TV is disconnected and the
Bluetooth device is connected.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
2017-04-11 �� 11:46:45
34 Operating
Using the Music Flow Bluetooth
App
,,Note
Only Android OS is available to use “Music Flow
Bluetooth” app with this unit.
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
About “Music Flow Bluetooth” App
3. In the search result list, find and tap “Music Flow
Bluetooth” to start downloading Bluetooth app.
“Music Flow Bluetooth” app brings a suite of new
features to this unit.
5. Tap an icon for downloading.
To enjoy more features, you are recommended to
download and install free “Music Flow Bluetooth”
app.
Install “Music Flow Bluetooth” App
onto Your Bluetooth Device
4
Install “Music Flow Bluetooth” App
through “Google Android Market
(Google Play Store)”
4. Tap an icon for installation.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
Operating
1. Install “Music Flow Bluetooth” app through QR
code. Use the scanning software to scan the QR
code.
2. Tap an icon for installation.
3. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)”.
yy Depending on the area, QR code may not
work.
LHR627-FE.DZAFLLK_ENG.indd 34
2017-04-11 �� 11:46:45
Operating 35
Activate Bluetooth with “Music
Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Bluetooth device to this unit.
1. Tap “Music Flow Bluetooth” app icon on the home
screen to open “Music Flow Bluetooth” app, and
go to the main menu.
2. Tap [Setting] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and [Help].
,,Note
yy “Music Flow Bluetooth” app will be available
in the software version as follow;
-- Android O/S : Ver 4.0.3 (or later)
yy If you use “Music Flow Bluetooth” app for
operation, there would be some differences
between “Music Flow Bluetooth” app and
the supplied remote control. Use the supplied
remote control as necessary.
yy After connection of “Music Flow Bluetooth”
app, music may be output from your device. In
this case, try connecting procedure again.
Operating
yy Depending on the Bluetooth device, “Music
Flow Bluetooth” app may not work.
4
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “Music Flow Bluetooth”
app, “Music Flow Bluetooth” app may operate
abnormally.
yy When “Music Flow Bluetooth” app operates
abnormally, check your Bluetooth device and
the connection of “Music Flow Bluetooth” app
and then try to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “Music
Flow Bluetooth” operation.
yy Check Bluetooth setting on your Bluetooth
device if “Music Flow Bluetooth” app
connection does not work well.
LHR627-FE.DZAFLLK_ENG.indd 35
2017-04-11 �� 11:46:45
36 Operating
Radio Operations
Presetting the Radio Stations
Be sure that FM antenna is connected. (Refer to the
page 20.)
Before tuning, make sure to turn down the volume.
Listening to FM radio
1. Press RADIO on the remote control or turn
INPUT SELECTION on the unit until FM appears
on the display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold TUNING -/+ for about 2 seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit tunes
in a station.
Manual tuning :
Press TUNING -/+ on the remote control
repeatedly.
4
You can preset 50 stations for FM.
1. Tune in to a radio station.
2. Press ENTER/SET. A preset number will blink in
the display window.
3. Press PRESET/FOLDER +/- to select the preset
number you want.
4. Press ENTER/SET. The station is stored.
5. Repeat steps 1 to 4 to store the other stations.
6. To listen to a preset station, press PRESET/
FOLDER +/- or 0 to 9 numerical buttons.
Deleting all the saved stations
1. Press and hold DELETE for two seconds.
“ERASE ALL?” will flash up on the unit display.
2. Press ENTER to erase all the saved radio stations.
Operating
3. Adjust the volume by pressing VOL+/- on the
remote control or turn MASTER VOLUME on the
unit.
Improving poor FM reception
Press MONO/STEREO on the remote control. This
will change the tuner from stereo to mono and
usually improve the reception.
LHR627-FE.DZAFLLK_ENG.indd 36
2017-04-11 �� 11:46:45
Operating 37
Other Operations
Dimmer
Press SLEEP once. The display window is darkened by
half and the lighting is turned off. To cancel it, press
SLEEP repeatedly until dim off.
Using the Sleep Timer
You can set the unit to turn off automatically at a
specified time. Press SLEEP repeatedly.
The indicator changes cyclically in the display window
as follows.
SLEEP 180 -> 150 -> 120 -> 90 -> 80 -> 70 -> 60
-> 50 -> 40 -> 30 -> 20 -> 10 -> Off (No display)
To check the remaining time, press SLEEP. The
remaining time appears on the display window.
,,Note
When the sleep timer is activated, the display
window dims and the lighting is turned off.
Displaying file and input source
You can display various information of the input
source by pressing INFORMATION.
Function
Description
AUX 1/2,
PORTABLE
Displays the audio format.
(ex : ANALOG)
BLUETOOTH
Sees the name of connected all
Bluetooth device in Bluetooth
mode.
HDMI IN 1/2/3,
OPTICAL
Displays the audio format and
audio channel.
(ex : PCM2/0.0, Dolby D 3/2.1,
etc.)
USB
This unit will be off itself to save electric consumption
in the case main unit is not connected to external
device and is not used for 20 minutes.
So does this unit after six hours since Main unit has
been connected to other device using analog input.
AUTO POWER On/Off
This unit automatically turns on by an input source :
Optical, LG TV or Bluetooth.
When you turn on your TV or an external device
connected to this unit, this unit recognizes the input
signal and select the suitable function. You can hear
the sound from your device.
If you try to connect your Bluetooth device, this unit
turns on and ready to pair. Connect your Bluetooth
device and play your music.
This function turns on or off each time you press
AUTO POWER.
,,Note
yy After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the TV connected by LG Sound Sync
(Wireless).
yy After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
yy If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER
function. However the unit can be turned
on by AUTO POWER function when optical
signal comes in after 5 seconds of no signal.
yy Depending on the connected device, this
function may not operate.
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turn off the unit.
yy When you turn on this unit for the first time,
Auto Power function is turned on status.
4
Operating
To cancel the sleep function, press SLEEP repeatedly
until “SLEEP 10” appears, and then press SLEEP
once again while “SLEEP 10” is displayed.
Auto power down
Displays the file information
during MP3/WMA playback.
and audio channel.
(ex : FILE-XXXXXX)
LHR627-FE.DZAFLLK_ENG.indd 37
2017-04-11 �� 11:46:45
38 Operating
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(AUX1/2 ,PORTABLE, FM)
1. Connect the USB device to the unit.
2. Select a function in which you want to record
by using INPUT SELECTION on the unit or
FUNCTION on the remote control.
3. Press XREC on the remote control.
4. To stop recording, press STOP on the unit or
XREC on the remote control.
Pausing recording
During recording, press PLAY/PAUSE on the unit or
M on the remote control to pause recording.
4
Operating
Press PLAY/PAUSE on the unit or d on the remote
control to restart recording.
To select recording bit rate
1. Press XREC on the remote control for longer
than 3 seconds.
,,Note
yy It is not supported to record music stored on
Bluetooth, HDMI IN and OPTICAL IN sources.
yy When you stop recording during playback, the
file that has been recorded at that time will
be stored.
yy Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete file may be made and not deleted
on PC.
yy If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT”, “FILE MAX” is displayed on the
display window.
yy Multi card reader device or External HDD can
not be used for USB recording.
yy A file is recorded by about 512 Mbyte when
you record for a long term.
yy You may not store more than 2000 files.
yy You can check recording elapsed time by
pressing INFORMATION button on the
remote control.
yy It’ll be stored as follows.
Tuner
The other source*
2. Press C/V on the remote control to select
a bit rate.
3. Press XREC on the remote control again to
finish the setting.
-- TUNER : The current recording frequency is
shown.
-- *: PORTABLE and the like.
yy You can record various sound using DJ Pro/
Scratch/DJ Effect/Original Source.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound recordings,
may be an infringement of copyrights and
constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
LHR627-FE.DZAFLLK_ENG.indd 38
2017-04-11 �� 11:46:45
Troubleshooting 39
Troubleshooting
PROBLEM
The unit does not
work properly.
No Power
CAUSE & CORRECTION
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy The power cord is unpluged.
Plug in the power cord.
yy Check the condition by operating other electronic devices.
yy The speaker wires are disconnected. Check the speaker connections.
yy The volume is set to minimum. Adjust the volume level.
No sound
yy Incorrect input source is selected.
Check the input source and select the correct input source.
yy The mute function is activated.
Press or adjust the volume level to cancel the mute function.
yy The remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
The remote control
does not work
properly.
LHR627-FE.DZAFLLK_ENG.indd 39
yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
5
Troubleshooting
yy The antenna is positioned poorly. Adjust its position.
yy The signal strength of the radio station is too weak.
Tune to the station manually.
Radio stations cannot
be tuned in properly. yy No stations have been preset or preset stations have been cleared (when tuning by
scanning preset channels).
Preset some radio stations, see page 36 for details.
yy The batteries in the remote control are exhausted.
Replace the batteries with new one.
2017-04-11 �� 11:46:45
40 Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
6
Setting up the remote to control
your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
press the manufacturer code for your TV with the
numerical buttons (see the table below).
Manufacturer
Code number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
Samsung
6, 7
By pressing
You can
Sony
8, 9
1 (TV POWER)
Turn the TV on or off.
Hitachi
4
INPUT
Switch the TV’s input source
between the TV and other
input sources.
PR/CH W/S
Scan up or down through
memorized channels.
VOL +/–
Adjust the volume of the TV
MUTE
Turn the TV’s volume on or
off.
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may be
reset to the default setting. Set the appropriate code
number again.
Appendix
,,Note
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
LHR627-FE.DZAFLLK_ENG.indd 40
2017-04-11 �� 11:46:45
Appendix 41
Trademarks and licenses
Maintenance
Handling the unit
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide spray
near the unit.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the double-D
symbol are Trademarks of dolby Laboratories.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
The Bluetooth® word mark and logos are owned
by the Bluetooth SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
6
Appendix
LHR627-FE.DZAFLLK_ENG.indd 41
2017-04-11 �� 11:46:46
42 Appendix
Specifications
General
Power requirements
Refer to the main label.
Power consumption
Refer to the main label.
Dimensions (W x H x D)
(430 x 146.5 x 368) mm
Net Weight (Approx.)
4.7 kg
Operating temperature
41 °F to 95 °F (5 °C to 35 °C)
Operating humidity
5 % to 90 %
Bus Power Supply
5 V 0 500 mA
Available Digital Input Audio
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Available Digital Input Audio
format
Dolby Digital, PCM
Available Music File format
MP3, WMA
Input/Output
6
ANALOG AUDIO IN
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 2
ANALOG VIDEO IN
1.0 Vrms (p-p), 75 Ω, sync negative, RCA jack x 1
OPTICAL IN
3.0 Vrms (p-p), Optical jack x 1
PORT. IN
0.5 Vrms ( 3.5 mm stereo jack) x 1
HDMI IN/OUT
19 pin (Type A, HDMI™ connector)
AUDIO OUT
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
VIDEO OUT
1.0 Vrms (p-p), 75 Ω, sync negative, RCA jack x 1
Appendix
Tuner
FM Tuning Range
87.5 MHz to 108.0 MHz or 87.50 MHz to 108.00 MHz
Amplifier (RMS output power)
Stereo mode
Surround mode
LHR627-FE.DZAFLLK_ENG.indd 42
167 W (3 Ω at 1 kHz) x 2
Front
167 W (3 Ω at 1 kHz) x 2
Rear
167 W (3 Ω at 1 kHz) x 2
Sub woofer
167 W (3 Ω at 70 Hz) x 2
2017-04-11 �� 11:46:46
Appendix 43
Front speakers/Rear speakers
Type
1 Way 1 Speaker
Impedance
3Ω
Rated Input Power
167 W x 2
Max. Input Power
334 W x 2
Net Dimensions (W x H x D)
(88 x 122 x 81) mm
Net Weight (1EA)
0.5 kg
Subwoofer
Type
1 Way 1 Speaker
Impedance
3Ω
Rated Input Power
167 W x 2
Max. Input Power
334 W x 2
Net Dimensions (W x H x D)
(191 X 388.5 X 318) mm
Net Weight(1EA)
5.0 kg
yy Designs and specifications are subject to change without prior notice.
6
Appendix
LHR627-FE.DZAFLLK_ENG.indd 43
2017-04-11 �� 11:46:46
LHR627-FE.DZAFLLK_ENG.indd 44
2017-04-11 �� 11:46:46