Biostar J1800NH3 Motherboard Manual
Add to My manuals33 Pages
Biostar J1900NH3 is an advanced mini-ITX form factor motherboard, supporting Dual Channel DDR3L 1333 memory up to 16GB, an onboard Intel Celeron J1900 quad-core processor, and featuring an integrated Intel HD graphics engine for smooth multimedia playback and basic gaming.
advertisement
![Biostar J1800NH3 Motherboard Manual | Manualzz Biostar J1800NH3 Motherboard Manual | Manualzz](http://s3.manualzz.com/store/data/052318355_2-693fdd1a20fb67a0591b63ca47cf2e85-360x466.png)
J1800NH3/J1900NH3/J2900NH3 Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.
Dichiarazione di conformità sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è conforme alle normative vigenti e soddisfa i requisiti essenziali richiesti dalle direttive
Short Declaration of conformity
We declare this product is complying with the laws in force and meeting all the essential requirements as specified by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE whenever these laws may be applied
2004/108/CE, 2006/95/CE e
1999/05/CE quando ad esso applicabili
Table of Contents
Chapter 1: Introduction ............................................................... 1
1.1
1.2
1.3
1.4
1.5
1.6
Before You Start ......................................................................... 1
Package Checklist ..................................................................... 1
Motherboard Specifications ....................................................... 2
Central Processing Unit (CPU) .................................................. 3
Rear Panel Connectors ............................................................. 3
Motherboard Layout .................................................................. 4
Chapter 2: Hardware Installation ................................................ 5
2.1
2.2
2.3
2.4
Connect Cooling Fans ............................................................... 5
Install System Memory .............................................................. 5
Expansion Slots ......................................................................... 7
Jumper Setting .......................................................................... 8
2.5
Headers & Connectors .............................................................. 9
Chapter 3: UEFI BIOS & Software ............................................. 13
3.1
3.2
UEFI BIOS Setup .................................................................... 13
BIOS Update ........................................................................... 13
3.3
Software ................................................................................... 17
Chapter 4: Useful Help .............................................................. 20
4.1
4.2
Driver Installation ..................................................................... 20
AMI BIOS Beep Code .............................................................. 21
4.3
Troubleshooting ....................................................................... 21
Appendix: SPEC In Other Languages ...................................... 23
Arabic ......................................................................................................... 23
French ........................................................................................................ 24
German ....................................................................................................... 25
Italian .......................................................................................................... 26
Japanese .................................................................................................... 27
Polish .......................................................................................................... 28
Portuguese ................................................................................................. 29
Russian ....................................................................................................... 30
Spanish ....................................................................................................... 31
J1800NH3/J1900NH3/J2900NH3
CHAPTER 1: INTRODUCTION
1.1 Before You Start
Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with sufficient lighting.
Always disconnect the computer from power outlet before operation.
Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.
Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat source, humid air and water.
The operating temperatures of the computer should be 0 to
45 degrees Celsius.
To avoid injury, be careful of:
Sharp pins on headers and connectors
Rough edges and sharp corners on the chassis
Damage to wires that could cause a short circuit
Serial ATA Cable x2
Rear I/O Panel for ATX Case x1
Installation Guide x1
Fully Setup Driver DVD x1
Note: The package contents may be different due to the sales region or models in which it was sold.
For more information about the standard package in your region, please contact your dealer or sales representative.
1
Motherboard Manual
1.3 Motherboard
Specifications
CPU Support
Memory
J1800NH3: Intel® Celeron® J1800 processor
J1900NH3: Intel® Celeron® J1900 processor
J2900NH3: Intel® Pentium® J2900 processor
Supports Dual Channel DDR3L 1333(1.35V/1.5V)
2x DDR3L SO-DIMM Memory Slot, Max. Supports up to 16 GB Memory
Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L module
* Please refer to www.biostar.com.tw
for Memory support list.
2x SATA 3Gb/s Connector, Supports Native IDE, AHCI Mode Storage
LAN
Audio Codec
Realtek RTL 8111G
10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability
ALC662, 5.1 Channels, High Definition Audio
USB
6x USB 2.0 port (4 on rear I/Os and 2 via internal header)
1x USB 3.0 port (1 on rear I/Os )
Expansion Slots 1x PCIe x1 Slot
1x PS/2 Mouse
1x PS/2 Keyboard
1x VGA Port
Rear I/Os
1x HDMI Port
1x USB 3.0 Port
4x USB 2.0 Port
1x LAN port
3x Audio Jack
Internal I/Os
Form Factor
OS Support
2x SATA 3.0Gb/s Connector
2x USB 2.0 Header (each header supports 2 USB 2.0 ports)
1x 4-Pin Power Connector
1x 24-Pin Power Connector
2x System Fan Connector
1x Front Panel Header
1x Front Audio Header
1x Clear CMOS Header
1x Printer Port Header
1x Serial Port Header
Mini-ITX Form Factor, 170 mm x 170 mm
Windows 7 / 8 / 8.1
Biostar reserves the right to add or remove support for any OS with or without notice.
2
J1800NH3/J1900NH3/J2900NH3
1.4 Rear Panel Connectors
Note 1: Since the audio chip supports High Definition Audio Specification, the function of each audio jack can be defined by software. The input / output function of each audio jack listed above represents the default setting. However, when connecting external microphone to the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.
Note 2: Maximum resolution:
HDMI: 1920 x 1200 @60Hz
VGA: 2560 x 1600 @60Hz
1.5 Central Processing Unit (CPU)
The motherboard is equipped with an onboard Intel procrssor and a CPU cooler.
Model Name: Onboard CPU:
J1800NH3
J1900NH3
J2900NH3
Intel® Celeron® J1800 processor (Dual core, 1M Cache, 2.58 GHz)
Intel® Celeron® J1900 processor (Quad core, 2M Cache, 2.42 GHz)
Intel® Pentium® J2900 processor (Quad core, 2M Cache, 2.67 GHz)
3
Motherboard Manual
Note: ■ represents the 1 st pin.
4
J1800NH3/J1900NH3/J2900NH3
CHAPTER 2: HARDWARE INSTALLATION
These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
SYS_FAN1/2: System Fan Header
Pin
1
2
3
Assignment
Ground
+12V
FAN RPM rate sense
Note: When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND.
A. DDR3L SO-DIMM Module (1.35V/1.5V)
Step 1: Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot.
5
Motherboard Manual
Step 2: Insert the DIMM firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
Note1: The DIMM must be installed to DIMMA1 slot first.
Note2: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
B. Memory Capacity
DIMM Socket Location DDR3L Module
DIMMA1 512MB/1GB/2GB/4GB/8GB
DIMMB1 512MB/1GB/2GB/4GB/8GB
Total Memory Size
Max is 16GB
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DIMMA1 DIMMB1
Disabled O X
Enabled O O
(O means memory installed, X means memory not installed.)
Note: The DRAM bus width of the memory module must be the same (x8 or x16)
6
J1800NH3/J1900NH3/J2900NH3
PEX1_1: PCI-Express Gen2 x1 Slot
-
-
PCI-Express 2.0 compliant.
Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.
Install an Expansion Card
You can install your expansion card by following steps:
1. Read the related expansion card's instruction document before install the expansion card into the computer.
2. Remove your computer's chassis cover, screws and slot bracket from the computer.
3. Place a card in the expansion slot and press down on the card until it is completely seated in the slot.
4. Secure the card’s metal bracket to the chassis back panel with a screw.
5. Replace your computer's chassis cover.
6. Power on the computer, if necessary, change BIOS settings for the expansion card.
7. Install related driver for the expansion card.
7
Motherboard Manual
The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”.
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard.
1 3
Pin 1-2 Close:
Normal Operation (default).
1 3
Pin 2-3 Close:
Clear CMOS data.
※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.
Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Load Optimal Defaults and save settings in CMOS.
8
J1800NH3/J1900NH3/J2900NH3
2.5 Headers & Connectors
ATXPWR1: ATX Power Source Connector
For better compatibility, we recommend to use a standard ATX 24-pin power supply for this connector. Make sure to find the correct orientation before plugging the connector.
Pin Assignment
13 +3.3V
14 -12V
15 Ground
16 PS_ON
17 Ground
18 Ground
19 Ground
20 NC
21 +5V
22 +5V
23 +5V
24 Ground
Pin Assignment
1 +3.3V
2 +3.3V
3 Ground
4 +5V
5 Ground
6 +5V
7 Ground
8 PW_OK
10 +12V
11 +12V
12 +3.3V
ATXPWR2: ATX Power Source Connector
This connector will provide +12V to CPU power circuit.
Pin Assignment
1 +12V
2 +12V
3 Ground
4 Ground
Note1: Before you power on the system, please make sure that both ATXPWR1 and
ATXPWR2 connectors have been plugged-in.
Note2: Insufficient power supplied to the system may result in instability or the peripherals not functioning properly. Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices.
9
Motherboard Manual
PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
10
6
7
8
4
5
Pin
1
2
3
+5V
N/A 10
N/A 11
Assignment Function
9 N/A
Speaker
HDD LED (+)
Hard drive LED
12
13
Power LED (+)
Power LED (+) Power LED
HDD LED (-)
Ground
Reset control
Reset button
14
15
16
Power LED (-)
Power button
Ground
Power-on button
SATA1/2: Serial ATA Connectors
These connectors connect to SATA hard disk drives via SATA cables. It satisfies the SATA 2.0 specification and with transfer rate of 3.0Gb/s.
Pin Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
7 Ground
J1800NH3/J1900NH3/J2900NH3
F_USB1/2: Header for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel, and also can be connected with a wide range of simultaneously accessible external Plug and Play peripherals.
Pin Assignment
3 USB-
4 USB-
5 USB+
6 USB+
7 Ground
8 Ground
9 Key
10 NC
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front panel. This header supports HD and AC’97 audio front panel connector.
HD Audio
Pin Assignment
1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
AC’97
Pin Assignment
1 Mic In
2 Ground
3 Mic Power
5 RT Line Out
7 Reserved
8 Key
9 LFT Line Out
8 Key
9 Left line in
Note1: It is recommended that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high definition audio capability.
Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an
AC'97 front audio output cable. The function can be found via O.S. Audio Utility.
11
Motherboard Manual
J_PRINT1: Printer Port Connector
This header allows you to connector printer on the PC.
12
Pin Assignment Pin Assignment
1 -Strobe 14 Ground
6 -Init 19 -ACK
8 -Scltin 21 Busy
10 Ground 23 PE
12 Ground 25 SCLT
Key
J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
Pin Assignment
4
5
6
7
1
2
3
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
10 Key
J1800NH3/J1900NH3/J2900NH3
CHAPTER 3: UEFI BIOS & SOFTWARE
3.1 UEFI BIOS Setup
The BIOS Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing the <DEL> key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins.
For further information of setting up the UEFI BIOS, please refer to the UEFI
BIOS Manual in the Setup DVD.
The BIOS can be updated using either of the following utilities:
BIOSTAR BIOS Flasher: Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a
CD-ROM.
BIOSTAR BIOS Update Utility: It enables automated updating while in the
Windows environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a
CD-ROM, or from the file location on the Web.
BIOSTAR BIOS Flasher
BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive.
Note1: This utility only allows storage device with FAT32/16 format and single partition.
Note2: Shutting down or resetting the system while updating the BIOS will lead to system boot failure.
Updating BIOS with BIOSTAR BIOS Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, copy and save the BIOS file into a USB flash (pen) drive.
3. Insert the USB pen drive that contains the BIOS file to the USB port.
4. Power on or reset the computer and then press <F12> during the POST process.
5. After entering the POST screen, the BIOS-FLASHER utility pops out. Choose [fs0] to search for the
BIOS file.
13
Motherboard Manual
6. Select the proper BIOS file, and a message asking if you are sure to flash the BIOS file. Click Yes to start updating BIOS.
7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the [Y] key to restart system.
8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit , using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
BIOS Update Utility (through the Internet)
1. Installing BIOS Update Utility from the DVD Driver.
2. Please make sure the system is connected to the internet before using this function.
3. Launch BIOS Update Utility and click the Online Update button on the main screen.
14
4. An open dialog will show up to request your agreement to start the
BIOS update. Click Yes to start the online update procedure.
J1800NH3/J1900NH3/J2900NH3
5. If there is a new BIOS version, the utility will ask you to download it.
Click Yes to proceed.
6. After the download is completed, you will be asked to program
(update) the BIOS or not. Click Yes to proceed.
7. After the updating process is finished, you will be asked you to reboot the system. Click OK to reboot.
8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit , using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
BIOS Update Utility (through a BIOS file)
1. Installing BIOS Update Utility from the DVD Driver.
2. Download the proper BIOS from http://www.biostar.com.tw/
3. Launch BIOS Update Utility and click the Update BIOS button on the main screen.
15
Motherboard Manual
4. A warning message will show up to request your agreement to start the BIOS update. Click OK to start the update procedure.
5. Choose the location for your BIOS file in the system. Please select the proper BIOS file, and then click on Open . It will take several minutes, please be patient.
6. After the BIOS Update process is finished, click on OK to reboot the system.
7. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit , using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
Backup BIOS
Click the Backup BIOS button on the main screen for the backup of
BIOS, and select a proper location for your backup BIOS file in the system, and click Save .
16
J1800NH3/J1900NH3/J2900NH3
3.3 Software
Installing Software
1. Insert the Setup DVD to the optical drive. The driver installation program would appear if the Auto-run function has been enabled.
2. Select , and then click on the respective software title.
3. Follow the on-screen instructions to complete the installation.
Launching Software
After the installation process is completed, you will see the software icon showing on the desktop. Double-click the icon to launch it.
Note1: All the information and content about following software are subject to be changed without notice. For better performance, the software is being continuously updated.
Note2: The information and pictures described below are for your reference only. The actual information and settings on board may be slightly different from this manual.
BIOScreen Utility
This utility allows you to personalize your boot logo easily. You can choose BMP as your boot logo so as to customize your computer.
Please follow the step-by-step instructions below to update boot logo:
Load : Choose the picture as the boot logo.
Transform : Transform the picture for BIOS and preview the result.
Update : Write the picture to BIOS Memory to complete the update.
17
Motherboard Manual
eHot-Line
eHot-Line is a convenient utility that helps you to contact with our Tech-Support system.
This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.
Note: Before you use this utility, please set Outlook Express as your default e-mail client application program.
* must provide. Without this information, you may not be able to send out the mail.
This block will show the information which would be collected in the mail.
* Describe condition of your system.
* Select your area or the area close to you.
Provide the e-mail address that you would like to send the copy to.
* Provide the name of the memory module manufacturer.
Send the mail out.
Exit this dialog.
Save these information to a .txt file
Provide the name of the power supply manufacturer and the model no.
After filling up this information, click
“ Send ” to send the mail out. A warning dialog would appear asking for your confirmation; click “ Send ” to confirm or “ Do Not Send ” to cancel.
If you want to save this information to a .txt file, click “ Save As… ” and then you will see a saving dialog appears asking you to enter file name.
18
J1800NH3/J1900NH3/J2900NH3
Enter the file name and then click
“ Save ”. Your system information will be saved to a .txt file.
Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail.
Note1: We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.
Note2: If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following website http://www.biostar.com.tw/app/en/about/contact.php
for getting our contact information.
19
Motherboard Manual
CHAPTER 4: USEFUL HELP
After you installed your operating system, please insert the Fully Setup Driver
DVD into your optical drive and install the driver for better system performance.
You will see the following window after you insert the DVD
The setup guide will auto detect your motherboard and operating system.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver DVD.
Click on the Manual icon to browse for available manuals.
Note1: If this window didn’t show up after you insert the Driver DVD, please use file browser to locate and execute the file SETUP.EXE under your optical drive.
Note2: You will need Acrobat Reader to open the manual file. Please download the latest version of
Acrobat Reader software from http://get.adobe.com/reader/
Note3: Intel(R) Trusted Execution Engine Interface Driver is only supported with Windows 8/8.1 &
Windows 7. For Windows 7 user, please install Microsoft Kernel-Mode Driver Framework (KMDF) version 1.1. Otherwise, you found a yellow bang appears as "Intel Trusted Execution Engine
Interface" under system device manager. Also, you can follow the Microsoft instructions from the link: KB2685811. http://support.microsoft.com/kb/2685811
20
POST BIOS Beep Codes
Number of Beeps
J1800NH3/J1900NH3/J2900NH3
4.2 AMI BIOS Beep Code
Boot Block Beep Codes
Number of Beeps
Continuing
Description
Memory sizing error or Memory module not found
Description
8 Display memory error (system video adapter)
4.3 Troubleshooting
Probable Solution
1. There is no power in the system. Power
LED does not shine; the fan of the power supply does not work
2. Indicator light on keyboard does not shine.
1. Make sure power cable is securely plugged in.
3. Contact technical support.
System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running.
System does not boot from a hard disk drive, but can be booted from optical drive.
System only boots from an optical drive.
Hard disks can be read, applications can be used, but system fails to boot from a hard disk.
Screen message shows “Invalid
Configuration” or “CMOS Failure.”
System cannot boot after user installs a second hard drive.
Using even pressure on both ends of the
DIMM, press down firmly until the module snaps into place.
1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup.
2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time.
1. Back up data and applications files.
2. Reformat the hard drive. Re-install applications and data using backup disks.
Review system’s equipment. Make sure correct information is in setup.
1. Set master/slave jumpers correctly.
2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives.
21
Motherboard Manual
CPU Overheated
If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
2. Wait for seconds.
3. Power on the system again.
22
J1800NH3/J1900NH3/J2900NH3
APPENDIX: SPEC IN OTHER LANGUAGES
Arabic
تﺎﻔﺻاﻮﻤﻟا
J1800NH3: Intel® Celeron® J1800 processor
J1900NH3: Intel® Celeron® J1900 processor
J2900NH3: Intel® Pentium® J2900 processor
DDR3L 1333(1.35V/1.5V) .
را .
يد .
يد ﺔﺟودﺰﻣ ةﺎﻨﻗ ﻢﻋﺪﺗ
ﺖﻳﺎﺑﺎﺠﻴﺟ 16 ﻰﺼﻗأ ﺪﺤآ ﻞﻤﺤﺘﺗ ، SO-DIMM ﺔﺟودﺰﻤﻟا ةﺮآاﺬﻟا تﺎﺤﺘﻓ DDR3L .
را .
يد .
يد x 2
ةﺮآاذ
را .
يد .
يد ﺖﻳﺎﺑﺎﺠﻴﺟ 8 / 4 / 2 / 1 / ﺖﻳﺎﺑ ﺎﺠﻴﻣ 512 ECC نود ﻞﻤﺤﺘﺗ DIMM ﺔﺟودﺰﻣ ﺔﺤﺘﻓ ﻞآ
DDR3L
.
ةﺮآاﺬﻟا ﻢﻋد ﺔﻤﺋﺎﻘﻟ www.biostar.com.tw ﻊﻗﻮﻤﻟا ﻰﻟإ عﻮﺟﺮﻟا ﻰﺟﺮﻳ *
ﺔﻴﻧﺎﺜﻟا / ﺖﻳﺎﺑ ﺎﺠﻴﺟ SATA 3
AHCI
ﺎﺗﺎﺳ x 2 ﺔﻠﺻو
/ IDE مﻷا ﺪﻳار ﻞﻤﺤﺘﺗ
Realtek RTL 8111G
ﺔﺟودﺰﻤﻟا ىﻮﺼﻘﻟا ةرﺪﻘﻟا / ﻒﺼﻨﻟا ، ﻲﺋﺎﻘﻠﺗ ﺪﻳﺪﺤﺗ ، ﺔﻴﻧﺎﺜﻟا / ﺖﻳﺎﺑﺎﺠﻴﻣ 1000 / 100 / 10
ALC662
ﺔﻗﺪﻟا ﺔﻴﻟﺎﻋ تاﻮﻨﻗ 5.1
عزﻮﻤﻟا لﻼﺧ ﻦﻣ 2 و ﺔﻴﻔﻠﺨﻟا جرﺎ ﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ 4 ) 2.0
USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x 6 ﺬﻓﺎﻨﻣ
( ﻲﻠﺧاﺪﻟا
( ﺔﻴﻔﻠﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ 1 ) 3.0
USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x 1 ﺬﻓﺎﻨﻣ
1 x PCIe ﺔﻴﻓﺎﺿﻹا تﺎﻘﺤﻠﻤﻟا ﺬﻔﻨﻣ ﺔﺤﺘﻓ x 1
ةرﺎﻔﻟا PS/2 x 1
ﺮﺗﻮﻴﺒﻤﻜﻠﻟ ﺢﻴﺗﺎﻔﻤﻟا ﺔﺣﻮﻟ PS/2 x 1
حﻮﺿﻮﻟا ﻲﻟﺎﻌﻟا دﺪﻌﺘﻣ ﻂﻴﺳو HDMI x 1 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘ ﻓ
VGA ﻲﺋﺮﻤﻟا ضﺮﻌﻟا ﺔﻣﻮﻈﻨﻣ x 1 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ
LAN ﺔﻴﻠﺤﻤﻟا ﺔﻜﺒﺸﻟا x 1 دﺪﻋ ﻞﻴﺻﻮﺘﻟ ﺔﺤﺘﻓ
3.0
USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x 1 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ
2.0
USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x 4 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ
تﻮﺼﻠﻟ كﺎﺟ x 3 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ
ﺔﻴﻧﺎﺜﻟا / ﺖﻳﺎﺑﺎﺠﻴﺟ 3 SATA x 2 ﺔﻠﺻو
( 2.0
USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ ﻦﻴﺘﺤﺘﻓ ﻞﻤﺤﺘﻳ عزﻮﻣ ﻞآ ) 2.0
USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x 2 عزﻮﻣ
ﺲﻴﺑﺎﺑد 4 x 1 ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻو
سﻮﺑد 24 x 1 ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻو
ﺔﻣﻮﻈﻨﻤﻟا ﺪﻳﺮﺒﺗ حواﺮﻣ x 2 ﺔﻠﺻو
ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا x 1 عزﻮﻣ
ﻲﻣﺎﻣﻷا تﻮﺼﻟا x 1 عزﻮﻣ
ﺮﺷﺎﺒﻣ سﻮﻤﻴﺳ x 1 عزﻮﻣ
ﺔﻌﺑﺎﻄﻠﻟ ﺔﺤﺘﻓ x 1 عزﻮﻣ
ﺔﻴﻠﺴﻠﺴﺗ ﺔﺤﺘﻓ x 1 عزﻮﻣ
ﻢﻣ 170 x ﻢﻣ 170 ، Mini-ITX ﺔﻣﺪﻘﺘﻤﻟا ﺎﻴﺟﻮﻟﻮﻨﻜﺘﻟا دﺪﻣ ﻞﻜﺷ ﻞﻣﺎﻋ
Windows 7 / 8 / 8.1 ب ﺲآإ زوﺪﻨﻳو
.
رﺎﻈﻧأ نوﺪﺑ وأ ﻊﻣ ﻞﻴﻐﺸﺗ مﺎﻈﻧ يﻷ ﻢﻋﺪﻟا ﺔﻟزأ وأ ﺔﻓﺎﺿإ ﻖﺤﺑ ﻆﻔﺘﺤﺗ BIOSTAR رﺎﺘﺳﻮﻴﺑ
ةﺪﺣو ةﺪﻋﺎﻗ
ﺔﻳﺰآﺮ ﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا
ةﺮآاﺬﻟا
ﻦﻳﺰﺨﺘﻟا
LAN ﺔﻴﻠﺤﻣ ﺔﻜﺒﺷ
ﻲﺗﻮﺼﻟا ﺰﻴﻣﺮﺘﻟا
مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ
USB
ﻊﺳﻮﺘﻟا تﺎﺤﺘﻓ
جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا
ﺔﻴﻔﻠﺨﻟا
جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا
ﺔﻴﻠﺧاﺪﻟا
ﻞﻜﺸﻟا ﻞﻣﺎﻋ
ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻧأ
ﺔﻣﻮﻋﺪﻤﻟا
23
Motherboard Manual
French
Support Unité
Centrale
Mémoire
Stockage
Réseau local
Codec audio
USB
Spécifications
J1800NH3: Intel® Celeron® J1800
J1900NH3: Intel® Celeron® J1900
J2900NH3: Intel® Pentium® J2900
Supporte mémoire DDR3L double canal 1333 (1.35V/1.5V)
Banc de mémoire 2 x DDR3L SO-DIMM, Supporte max. jusqu’à une mémoire de 16 GB
Chaque module DIMM supporte module DDR3L non-ECC 512MB/ 1/ 2/ 4/ 8 GB
* Veuillez vous reporter à www.biostar.com.tw
pour la liste des soutien de la mémoire.
Connecteur 2 x SATA 3Gb/s
Supporte système indigène IDE & AHCI mode
Realtek RTL 8111G
10/ 100/ 1000 Mb/s auto négociation, capacité bidirectionnelle à l'alternat / bidirectionnelle simultanée
ALC662, Canaux 5.1, écoute audio de haute définition
Port 6x USB 2.0 (4 sur les I/O arrières et 2 en interne)
Port 1x USB 3.0 (1 sur les I/O arrières)
Connecteur d’extension
1x PCIe x1 Fente
I/O arrirèes
I/O en interne
1x PS/2 Clavier
1x PS/2 Souris
1x Port HDMI
1x Port VGA
1x port LAN
1x Port USB 3.0
4x Port USB 2.0
3x entrées audio
2x Connecteur SATA 3.0Gb/s
2x embases USB 2.0 (chaque embase supporte 2 Ports USB 2.0)
1x 4-Broche de carte
1x 24-Broche de carte
2x Connecteur ventilateur système
1x Fiche panneau avant
1x Fiche audio avant
1x Fiche mémoire CMOS vide
1x Embase port imprimante
1x Embase port série
Facteur d'encombremen t
Facteur d'encombrement Mini-ITX, 170 mm x 170 mm
Support SE
Windows 7 / 8 / 8.1
Biostar se réserve le droit d’ajouter ou d'enlever le support pour toute SE avec ou sans préavis.
24
J1800NH3/J1900NH3/J2900NH3
German
CPU-Unterstützun g
Festplattenspeich er
Arbeitsspeicher
LAN
Audio-Codec
USB
Spezifikationen
J1800NH3: Intel® Celeron® J1800
J1900NH3: Intel® Celeron® J1900
J2900NH3: Intel® Pentium® J2900
Unterstützt zweikanaliges DDR3L 1333 (1.35V/1.5V)
2 x DDR3L SO-DIMM-SpeicherSlot, Max. Uterstützung bis zu 16
GB-Speicher
Jedes DIMM unterstützt nicht-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L-Module
* Bitte konsultieren Sie www.biostar.com.tw
für für Speicherunterstützung
Liste.
2x SATA 3Gb-Verbindung
Unterstützt Ureinwohner IDE & AHCI Modus
Realtek RTL 8111G
10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig
ALC662, 5.1 Kanäle, HD-Audio
6x USB 2.0-Port (4 hintere I/Os und 2 via interne Header)
1x USB 3.0-Port (1 hintere I/Os)
Erweiterungsansc hlüsse
1x PCIe x1-Slot
Hintere I/Os
Interne I/Os
Formfaktor
OS-Unterstützung
1x PS/2-Maus
1x PS/2-Keyboard
1x HDMI-Port
1x VGA-Port
1x LAN-Port
1x USB 3.0-Port
4x USB 2.0-Port
3x Audio Jack
2x SATA 3.0Gb/s-Verbinung
2x USB 2.0-Header (jeder Header unterstützt 2 USB 2.0-Ports)
1x 4-Pin-Stromverbindung
1x 24-Pin-Stromverbindung
2x System-Ventilatorverbindung
1x Header für Frontpanel
1x Header für Frontaudio
1x Header für klares CMOS
1x Header für Druckerport
1x Serieller Port-Header
Mini-ITX Formfaktor, 170 mm x 170 mm
Windows 7 / 8 / 8.1
Biostar reserves the right to add or remove support for any OS with or without notice.
25
Motherboard Manual
Italian
Specificazioni
Supporto processore
Memoria
Memorizzazione
Catena
Codec Audio
USB
J1800NH3: Intel® Celeron® J1800
J1900NH3: Intel® Celeron® J1900
J2900NH3: Intel® Pentium® J2900
Supporta DDR3L 1333 Doppio Canale (1.35V/1.5V)
2 x DDR3L SO-DIMM Slot di Memoria Supporta fino a 16 GB Memoria
Ogni DIMM supporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L moduli
* Si prega di consultare www.biostar.com.tw
per la lista di supporto del memoria.
Connettore 2x SATA 3Gb/s
Supporta nativo IDE & AHCI modo
Realtek RTL 8111G
10/ 100/ 1000 Mb auto negoziazione, capacita di duplex Meta / Completo
ALC662
Canali Audio di Alta Definizione 5.1
Slot 6x USB 2.0 (4 nei ingressi/ uscite posteriore e 2 da distributori interni)
Slot 1x USB 3.0 (1 nei ingressi/ uscite posteriore)
Slot di espansione
Slot 1x PCIe x1
Ingressi/ Uscite
Posteriore
Supporto SO
Mouse 1x PS/2
Tastiera 1x PS/2
Slot 1x HDMI
Slot 1x VGA
Slot 1x LAN
Slot 1x USB 3.0
Slot 4x USB 2.0
Jack audio 3x
Connettore 2x SATA 3.0Gb/s
Ingressi/ Uscite
Interni
Distributore 2x USB 2.0(ogni distributore supporta 2 slot USB 2.0)
Connettore con 4 pin x1
Connettore con 24 pin x1
Connettore Ventilatore Sistema x2
Distributore Pannello Frontale x1
Distributore Audio Frontale x1
Distributore CMOS Diretto x1
Distributore Slot Stampante x1
Distributore Slot Serie x1
Fattore di Forma Fattore di Forma Mini-ITX, 170 mm x 170 mm
Windows 7 / 8 / 8.1
Biostar si riserva il diritto di aggiungere o ritirare il supporto per qualsiasi SO con o senza preavviso.
26
J1800NH3/J1900NH3/J2900NH3
Japanese
仕仕
サポート OS
J1800NH3: Intel® Celeron® J1800
CPU
メモリ
保存スペース
LAN
サポート J1900NH3: Intel® Celeron® J1900
J2900NH3: Intel® Pentium® J2900
デュアルチャンネル DDR3L 1333 をサポート (1.35V/1.5V)
2 x DDR3L SO-DIMM メモリ スロット、 最大 16GB メモリまでサポート
各 DIMM は、 非 -ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L モジュールをサポート
しています
* サポートされているメモリのリストについては、 www.biostar.com.tw
を参照
してください。
2x SATA 3Gb/s コネクタ
ネイティブ IDE & AHCI モード のサポート
Realtek RTL 8111G
10/ 100/ 1000 Mb/s オートネゴーシエーション、半 / 全 二重通信
オーディオ コー
デック
後部 I/O
ALC662
5.1 チャンネル , ハイ デフィニション オーディオ
USB
6x USB 2.0 ポート ( 後部 I/O に 4 つ 及び 内蔵ヘッダー経由に 2 つ )
1x USB 3.0 ポート ( 後部 I/O に 1 つ )
拡張スロット 1x x1
1x PS/2 キーボード
1x PS/2 マウス
1x HDMI ポート
1x VGA ポート
1x LAN ポート
1x USB 3.0 ポート
4x USB 2.0 ポート
3x オーディオ ジャック
内蔵 I/O
2x SATA 3.0Gb/s コネクタ
2x USB 2.0 ヘッダー ( 各ヘッダーは、 2 つの USB 2.0 ポートをサポートして
います )
1x 4-Pin パワー コネクタ
1x 24-Pin パワー コネクタ
2x システム ファン コネクタ
1x フロント パネル ヘッダー
1x フロント オーディオ ヘッダー
1x クリア CMOS ヘッダー
1x プリンター ポート ヘッダー
1x シリアル ポート ヘッダー
フォーム ファク
タ
Mini-ITX フォーム ファクタ、 170 mm x 170 mm
Windows 7 / 8 / 8.1
Biostar には、通知なしでサポート OS を変更する権限があります。
27
Motherboard Manual
Polish
Specyfikacje techniczne
Obs ł uga procesora
J1800NH3: Intel® Celeron® J1800
J1900NH3: Intel® Celeron® J1900
J2900NH3: Intel® Pentium® J2900
Pojedynczy pami ę ci DDR3L 1333 Dwukana ł owa (1.35V/1.5V)
2x DDR3L SO-DIMM Pami ęć Gniazda procesora (Slot), Maksymalna wielko ść pami ę ci 16 GB
Pami ęć
Ka ż dy DIMM obs ł uguje jeden modu ł non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L
* Prosz ę sprawdzi ć list ę obs ł ugiwanych pami ęć na stronie internetowej www.biostar.com.tw
Przechowywanie Z łą cze 2x SATA 3Gb/s, Obs ł uga rodzimy IDE & AHCI tryb
LAN
Realtek RTL 8111G
10/ 100/ 1000 Mb auto negocjacja, pojemno ść dupleks Po ł owe / Pe ł ny
Codec Audio
USB
ALC662
Kana ł y Audio wysokiej Definicji 5.1
6 x z łą cza USB 2.0 (4 przez tylne porty wej ś cia/ wyj ś cia oraz 2 przez wewn ę trzne porty)
1x z łą cza USB 3.0 (1 przez tylne porty wej ś cia)
Z łą cza rozszerze ń z łą cza 1x PCIe x1
Tylne porty wej ś cia/ wyj
Wewn wej ś ę ś cia trzne porty cia/ wyj ś cia
Myszka 1x PS/2
Klawiatura 1x PS/2
Porty 1x HDMI (gniazdo)
Porty 1x VGA
Porty 1x LAN
Porty 1x USB 3.0
Porty 4x USB 2.0
Porty audio 3x
Z łą cza 2x SATA 2.0Gb/s
Z łą cza 2x USB 2.0 (ka ż de z łą cze obs ł uguje dodatkowe 2 porty USB 2.0)
Z łą cza 4 pionowe x 1
Z łą cza 24 pionowe x 1
Z łą cze wentylatora obudowy x2
Z łą cze przedniego panelu x1
Z łą cze audio przedniego panelu x1
Z łą cze bezpo ś rednie CMOS x1
Z łą cze port drukarki x1
Port szeregowy x1
Obudowa Obudowa Mini-ITX, 170 mm x 170 mm
Obs ł uga OS
Windows 7 / 8 / 8.1
Biostar zastrzega sobie prawo do dodania lub wycofania obs ł ugi dla OS, z wypowiedzeniem lub bez wypowiedzenia.
28
J1800NH3/J1900NH3/J2900NH3
Portuguese
Especificações
Suporte
Processador
Memória
J1800NH3: Intel® Celeron® J1800
J1900NH3: Intel® Celeron® J1900
J2900NH3: Intel® Pentium® J2900
Suporta DDR3L 1333 Canal Duplo (1.35V/1.5V)
2 x DDR3L SO-DIMM Slot de memória Suporta até 16 GB Memória
Cada DIMM suporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L módulo
* Por favor consulte www.biostar.com.tw
para obter uma lista de suporte do memória.
Armazenamento Conector 2x SATA 3Gb/s,Suporta nativo IDE & AHCI modo
LAN
Realtek RTL 8111G
10/ 100/ 1000 Mb auto negociação, capacidade duplex Metade / Cheio
Codec de Audio
USB
ALC662
Canais de Áudio de Alta Definição 5.1
Porta 6x USB 2.0 (4 nas entradas/saídas traseiras e 2 pelos Dispositivos internos)
Porta 1x USB 3.0 (1 nas entradas/saídas traseiras)
Slots de expansão
Porta 1x PCIe x1
Entradas/Saídas no painel traseiro
Mouse 1x PS/2
Teclado 1x PS/2
Porta 1x HDMI
Porta 1x VGA
Porta 1x LAN
Porta 1x USB 3.0
Porta 4x USB 2.0
Soquete audio 3x
Conector 2x SATA 3.0Gb/s
Conectores na placa
Dispositivo 2x USB 2.0 (cada Dispositivo suporta 2 portas USB 2.0)
Conector de 4 pinos x1
Conector de 24 pinos x1
Conector de Ventoinha Sistema x2
Dispositivo Painel Frontal x1
Dispositivo de Audio Frontal x1
Dispositivo CMOS Direct x1
Dispositivo Porta Impressora x1
Dispositivo Porta Série x1
Fator de Fôrma Fator de Fôrma Mini-ITX, 170 mm x 170 mm
Suporte OS
Windows 7 / 8 / 8.1
Biostar reserva seu direito de adicionar ou retirar o suporte para qualquer OS com ou sem notificação.
29
Motherboard Manual
Russian
Спецификации
Поддержка центрального процессора
Память
USB
Накопитель
Локальная
Аудиокодек сеть
J1800NH3: Intel® Celeron® J1800
J1900NH3: Intel® Celeron® J1900
J2900NH3: Intel® Pentium® J2900
Поддерживает двухканальный DDR3L 1333 (1.35V/1.5V)
2 гнезда платы памяти DDR3L SO-DIMM, максимальная память до 16 Гб
Каждый модуль DIMM поддерживает модуль не -ECC 512 Мб / 1/ 2/ 4/ 8 Гб
DDR3L
* Перечень поддержки памяти смотрите на www.biostar.com.tw
.
Соединитель 2x SATA 3 Гб / с , Поддерживает родной IDE & AHCI режим
Realtek RTL 8111G
Автосогласование 10/ 100/ 1000 Мб / с , работает в полно / полудуплексном режиме
ALC662
Каналы 5.1, высококачественное аудио
6 порта USB 2.0 (4 сзади ввода вывода и 2 через внутренние контакты )
1 порта USB 3.0 (1 сзади ввода вывода )
Гнезда расшир . 1x x1
1 мышь PS/2
1 клавиатура PS/2
Задняя ввода плата вывода
1 порт HDMI
1 порт VGA
1 порт локальной сети
1 порта USB 3.0
4 порта USB 2.0
3 гнезд для подключения наушников
Внутр ввода
.
-
Плата
Конструктив
Поддержка вывода
ОС
Соединитель 2x SATA 3 Гб / с
2 контакта USB 2.0 ( каждый контакт поддерживает 2 порта USB 2.0)
1 4выводный разъем питания
1 24выводный разъем питания
2 разъема вентилятора системы
1 контакт передней панели
1 контакт передней аудиопанели
1 контакт микросхемы Clear CMOS
1 контакт порта принтера
1 контакт последовательного порта
Форм фактор Mini-ITX, 170 мм x 170 мм
Windows 7 / 8 / 8.1
Biostar оставляет за собой право добавлять или удалять поддержку любой ОС , с уведомлением или без .
30
J1800NH3/J1900NH3/J2900NH3
Spanish
Compatibilidad con el procesador
Memoria
Especificaciones
J1800NH3: Intel® Celeron® J1800
J1900NH3: Intel® Celeron® J1900
J2900NH3: Intel® Pentium® J2900
Soporta DDR3L 1333 Doble Canal (1.35V/1.5V)
2x DDR3L SO-DIMM Ranura de memoria Soporta hasta 16 GB Memoria
Cada DIMM soporta un modulo non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L
*Por favor consultar con www.biostar.com.tw
para la lista de compatibilidad con el memoria.
Almacenamiento de información
Conector 2x SATA 3Gb/s, Soporta nativo IDE & AHCI modo
LAN
Códec Audio
USB
Realtek RTL 8111G
10/ 100/ 1000 Mb/s auto negociación, capacidad dúplex Mitad/Completo
ALC662, Canales Audio de Alta Definición 5.1
Ranura 6x USB 2.0 (4 en las entradas/salidas posteriores y 2 por los distribuidores internos)
Ranura 1x USB 3.0 (1 en las entradas/salidas posteriores)
Ranuras de
Extinción
Ranura 1x PCIe x1
Panel trasero de
E/S
Conectores en placa
Ratón 1x PS/2
Teclado 1x PS/2
Ranura 1x HDMI
Ranura 1x VGA
Ranura 1x LAN
Ranura 1x USB 3.0
Ranura 4x USB 2.0
Socket audio 3x
Conector 2x SATA 3Gb’s
Distribuidor 2x USB 2.0 (cada distribuidor soporta 2 ranuras USB 2.0)
Conector con 4 patillas x1
Conector con 24 patillas x1
Conector Ventilador Sistema x2
Distribuidor Panel Frontal x1
Distribuidor Audio Frontal x1
Distribuidor CMOS Directo x1
Distribuidor Ranura Impresora x1
Distribuidor Ranura Serie x1
Factor de Forma Factor de Forma Mini-ITX, 170 mm x 170 mm
Soporte OS
Windows 7 / 8 / 8.1
Biostar reserva su derecho de añadir o retirar el soporte para cada OS con o sin notificación.
2014/08/07
31
advertisement
Key Features
- Supports Intel Celeron and Pentium processors
- Compact Micro-ATX form factor
- Variety of expansion slots, including PCI Express and SATA
- Onboard audio and LAN
- Supports up to 16GB of DDR3 memory
Related manuals
Frequently Answers and Questions
What type of processors does the Biostar J1800NH3 support?
What is the maximum amount of memory that the Biostar J1800NH3 supports?
What expansion slots does the Biostar J1800NH3 have?
advertisement
Table of contents
- 3 Chapter 1: Introduction
- 3 Before You Start
- 3 Package Checklist
- 4 Motherboard Specifications
- 5 Central Processing Unit (CPU)
- 5 Rear Panel Connectors
- 6 Motherboard Layout
- 7 Chapter 2: Hardware Installation
- 7 Connect Cooling Fans
- 7 Install System Memory
- 9 Expansion Slots
- 10 Jumper Setting
- 11 Headers & Connectors
- 15 Chapter 3: UEFI BIOS & Software
- 15 UEFI BIOS Setup
- 15 BIOS Update
- 19 Software
- 22 Chapter 4: Useful Help
- 22 Driver Installation
- 23 AMI BIOS Beep Code
- 23 Troubleshooting
- 25 Appendix: SPEC In Other Languages
- 25 Arabic
- 26 French
- 27 German
- 28 Italian
- 29 Japanese
- 30 Polish
- 31 Portuguese
- 32 Russian
- 33 Spanish