Biostar J1800NP Motherboard Manual

J1800NHP/J1800NP/J1900NHP/J1900NP Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.

Dichiarazione di conformità sintetica

Ai sensi dell’art. 2 comma 3 del D.M.

275 del 30/10/2002

Si dichiara che questo prodotto è conforme alle normative vigenti e soddisfa i requisiti essenziali richiesti dalle direttive

2004/108/CE, 2006/95/CE e

1999/05/CE quando ad esso applicabili

Short Declaration of conformity

We declare this product is complying with the laws in force and meeting all the essential requirements as specified by the directives

2004/108/CE, 2006/95/CE and

1999/05/CE whenever these laws may be applied

Table of Contents

Chapter 1: Introduction ............................................................... 1

1.1

Before You Start ......................................................................... 1

1.2

1.3

1.4

1.5

Package Checklist ..................................................................... 1

Motherboard Specifications ....................................................... 2

Central Processing Unit (CPU) .................................................. 3

Rear Panel Connectors ............................................................. 3

1.6

Motherboard Layout .................................................................. 4

Chapter 2: Hardware Installation ................................................ 5

2.1

2.2

2.3

2.4

2.5

Connect Cooling Fans ............................................................... 5

Install System Memory .............................................................. 5

Expansion Slots ......................................................................... 7

Jumper Setting .......................................................................... 8

Headers & Connectors .............................................................. 9

Chapter 3: UEFI BIOS & Software ............................................. 13

3.1

3.2

3.3

UEFI BIOS Setup .................................................................... 13

BIOS Update ........................................................................... 13

Software ................................................................................... 17

Chapter 4: Useful Help .............................................................. 20

4.1

4.2

4.3

Driver Installation ..................................................................... 22

AMI BIOS Beep Code .............................................................. 23

Troubleshooting ....................................................................... 23

Appendix: SPEC In Other Languages ...................................... 25

Arabic ......................................................................................................... 25

French ........................................................................................................ 26

German ....................................................................................................... 27

Italian .......................................................................................................... 28

Japanese .................................................................................................... 29

Polish .......................................................................................................... 30

Portuguese ................................................................................................. 31

Russian ....................................................................................................... 32

Spanish ....................................................................................................... 33

J1800NHP/J1800NP/J1900NHP/J1900NP

CHAPTER 1: INTRODUCTION

1.1 Before You Start

Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with sufficient lighting.

 Always disconnect the computer from power outlet before operation.

 Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.

 Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment.

 Keep the computer from dangerous area, such as heat source, humid air and water.

 The operating temperatures of the computer should be 0 to

45 degrees Celsius.

 To avoid injury, be careful of:

Sharp pins on headers and connectors

Rough edges and sharp corners on the chassis

Damage to wires that could cause a short circuit

 Serial ATA Cable x2

 Rear I/O Panel for ATX Case x1

 Installation Guide x1

 Fully Setup Driver DVD x1

Note: The package contents may be different due to the sales region or models in which it was sold.

For more information about the standard package in your region, please contact your dealer or sales representative.

1

Motherboard Manual

1.3 Motherboard

Specifications

CPU Support

Memory

Intel® Celeron® J1800 processor (J1800NHP & J1800NP)


Supports Dual Channel DDR3L 1333 (1.35V/1.5V)

2x DDR3L SO-DIMM Memory Slot, Max. Supports up to 16 GB Memory

Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L module

* Please refer to www.biostar.com.tw

for Memory support list.

2x SATA 3Gb/s Connector, Supports Native IDE, AHCI Mode Storage

LAN

Audio Codec

USB

Realtek RTL 8111G

10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability

ALC662, 5.1 Channels, High Definition Audio

6x USB 2.0 port (2 on rear I/Os and 4 via internal header)

1x USB 3.0 port (1 on rear I/Os )

Expansion Slots 1x PCI x1 Slot

J1800NHP/J1900NHP:

Rear I/Os

Internal I/Os

1x PS/2 Mouse

1x PS/2 Keyboard

1x VGA Port

1x HDMI Port

1x USB 3.0 Port

2x USB 2.0 Port

1x LAN port

3x Audio Jack

J1800NP/J1900NP:

1x PS/2 Mouse

1x PS/2 Keyboard

1x COM Port

1x Printer Port

1x VGA Port

1x USB 3.0 Port

2x USB 2.0 Port

1x LAN port

3x Audio Jack

2x SATA 3.0Gb/s Connector

2x USB 2.0 Header (each header supports 2 USB 2.0 ports)

1x 4-Pin Power Connector

1x 24-Pin Power Connector

2x System Fan Connector

1x Front Panel Header

1x Front Audio Header

1x Clear CMOS Header

1x Serial Port Header

1x S/PDIF out Connector

Form Factor

OS Support

Mini-ITX Form Factor, 170 mm x 170 mm

Windows 7 / 8 / 8.1

Biostar reserves the right to add or remove support for any OS with or without notice.

2

J1800NHP/J1800NP/J1900NHP/J1900NP

1.4 Rear Panel Connectors

J1800NHP/J1900NHP

J1800NP/J1900NP

Note 1: Since the audio chip supports High Definition Audio Specification, the function of each audio jack can be defined by software. The input / output function of each audio jack listed above represents the default setting. However, when connecting external microphone to the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.

Note 2: Maximum resolution:

HDMI: 1920 x 1200 @60Hz

VGA: 2560 x 1600 @60Hz

1.5 Central Processing Unit (CPU)

The motherboard is equipped with an onboard Intel procrssor and a CPU cooler.

Onboard CPU: Model Name:

J1800NHP

J1800NP

J1900NHP

J1900NP

Intel® Celeron® J1800 processor (Dual core, 1M Cache, 2.58 GHz)

Intel® Celeron® J1900 processor (Quad core, 2M Cache, 2.42 GHz)

3


Note 1: ■ represents the 1st pin

Note 2: HDMI1 is only for J1800NHP/J1900NHP

Note 3: PRNT1 & COM2 are only for J1800NP/J1900NP

4

J1800NHP/J1800NP/J1900NHP/J1900NP

CHAPTER 2: HARDWARE INSTALLATION

These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.

SYS_FAN1/2: System Fan Header

Pin

1

2

3

Assignment

Ground

+12V

FAN RPM rate sense

Note: SYS_FAN1/2 support 4-pin and 3-pin head connectors. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND.

A. DDR3L SO-DIMM Module (1.35V/1.5V)

Step 1: Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot.

5


Step 2: Insert the DIMM firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.

Note1: The DIMM must be installed to DIMMA1 slot first.

Note2: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.

B. Memory Capacity

DIMM Socket Location DDR3L Module

DIMMA1 512MB/1GB/2GB/4GB/8GB

DIMMB1 512MB/1GB/2GB/4GB/8GB

Total Memory Size

Max is 16GB

C. Dual Channel Memory Installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table.

Dual Channel Status DIMMA1 DIMMB1

Disabled O X

Enabled O O

(O means memory installed, X means memory not installed.)

Note: The DRAM bus width of the memory module must be the same (x8 or x16)

6

J1800NHP/J1800NP/J1900NHP/J1900NP

PCI1: Peripheral Component Interconnect Slots

The PCI slot supports cards used in PCs include: LAN cards, sound cards, modems, TV tuner cards and other cards that comply PCI standard.

Install an Expansion Card

You can install your expansion card by following steps:

1. Read the related expansion card's instruction document before install the expansion card into the computer.

2. Remove your computer's chassis cover, screws and slot bracket from the computer.

3. Place a card in the expansion slot and press down on the card until it is completely seated in the slot.

4. Secure the card’s metal bracket to the chassis back panel with a screw.

5. Replace your computer's chassis cover.

6. Power on the computer, if necessary, change BIOS settings for the expansion card.

7. Install related driver for the expansion card.

7


The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”.

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard.

1 3

Pin 1-2 Close:

Normal Operation (default).

1 3

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1.

2.

3.

4.

5.

6.

Remove AC power line.

Set the jumper to “Pin 2-3 close”.

Wait for five seconds.

Set the jumper to “Pin 1-2 close”.

Power on the AC.

Load Optimal Defaults and save settings in CMOS.

8

J1800NHP/J1800NP/J1900NHP/J1900NP

2.5 Headers & Connectors

ATXPWR1: ATX Power Source Connector

For better compatibility, we recommend to use a standard ATX 24-pin power supply for this connector. Make sure to find the correct orientation before plugging the connector.

Pin Assignment

13 +3.3V

14 -12V

15 Ground

16 PS_ON

17 Ground

18 Ground

19 Ground

20 NC

21 +5V

22 +5V

23 +5V

24 Ground

Pin Assignment

1 +3.3V

2 +3.3V

3 Ground

4 +5V

5 Ground

6 +5V

7 Ground

8 PW_OK

10 +12V

11 +12V

12 +3.3V

ATXPWR2: ATX Power Source Connector

This connector will provide +12V to CPU power circuit.

Pin Assignment

1 +12V

2 +12V

3 Ground

4 Ground

Note1: Before you power on the system, please make sure that both ATXPWR1 and

ATXPWR2 connectors have been plugged-in.

Note2: Insufficient power supplied to the system may result in instability or the peripherals not functioning properly. Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices.

9


PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.

10

6

7

8

4

5

Pin

1

2

3

+5V

N/A 10

N/A 11

Assignment Function

9 N/A

Speaker

HDD LED (+)

Hard drive LED

12

13

Power LED (+)

Power LED (+) Power LED

HDD LED (-)

Ground

Reset control

Reset button

14

15

16

Power LED (-)

Power button

Ground

Power-on button

SATA1/2: Serial ATA Connectors

These connectors connect to SATA hard disk drives via SATA cables. It satisfies the SATA 2.0 specification and with transfer rate of 3.0Gb/s.

Pin Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

7 Ground

J1800NHP/J1800NP/J1900NHP/J1900NP

F_USB1/2: Header for USB 2.0 Ports at Front Panel

These headers allow user to connect additional USB cable on the PC front panel, and also can be connected with a wide range of simultaneously accessible external Plug and Play peripherals.

Pin Assignment

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

10 NC

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front panel. This header supports HD and AC’97 audio front panel connector.

HD Audio

Pin Assignment

1 Mic Left in

2 Ground

3 Mic Right in

4 GPIO

5 Right line in

AC’97

Pin Assignment

1 Mic In

2 Ground

3 Mic Power

5 RT Line Out

7 Reserved

8 Key

9 LFT Line Out

8 Key

9 Left line in

Note1: It is recommended that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high definition audio capability.

Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an

AC'97 front audio output cable. The function can be found via O.S. Audio Utility.

11


JSPDIFOUT1: Digital Audio-out Connector

The connector is for connecting the S/PDIF output bracket.

Pin Assignment

1 +5V

2 SPDIF_OUT

3 Ground

COM1: Serial Port Connector (Serial Port 1)

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin Assignment

4

5

6

7

1

2

3

Carrier detect

Received data

Transmitted data

Data terminal ready

Signal ground

Data set ready

Request to send

10 Key

12

J1800NHP/J1800NP/J1900NHP/J1900NP

CHAPTER 3: UEFI BIOS & SOFTWARE

3.1 UEFI BIOS Setup

 The BIOS Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing the <DEL> key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins.

 For further information of setting up the UEFI BIOS, please refer to the UEFI

BIOS Manual in the Setup DVD.

The BIOS can be updated using either of the following utilities:

 BIOSTAR BIOS Flasher: Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a

CD-ROM.

 BIOSTAR BIOS Update Utility: It enables automated updating while in the

Windows environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a

CD-ROM, or from the file location on the Web.

BIOSTAR BIOS Flasher

BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive.

Note1: This utility only allows storage device with FAT32/16 format and single partition.

Note2: Shutting down or resetting the system while updating the BIOS will lead to system boot failure.

Updating BIOS with BIOSTAR BIOS Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, copy and save the BIOS file into a USB flash (pen) drive.

3. Insert the USB pen drive that contains the BIOS file to the USB port.

4. Power on or reset the computer and then press <F12> during the POST process.

5. After entering the POST screen, the BIOS-FLASHER utility pops out. Choose [fs0] to search for the

BIOS file.

13


6. Select the proper BIOS file, and a message asking if you are sure to flash the BIOS file. Click Yes to start updating BIOS.

7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the [Y] key to restart system.

8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit , using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and

Reset to restart the computer. Then, the BIOS Update is completed.

BIOS Update Utility (through the Internet)

1. Installing BIOS Update Utility from the DVD Driver.

2. Please make sure the system is connected to the internet before using this function.

3. Launch BIOS Update Utility and click the Online Update button on the main screen.

14

J1800NHP/J1800NP/J1900NHP/J1900NP

4. An open dialog will show up to request your agreement to start the

BIOS update. Click Yes to start the online update procedure.

5. If there is a new BIOS version, the utility will ask you to download it.

Click Yes to proceed.

6. After the download is completed, you will be asked to program

(update) the BIOS or not. Click Yes to proceed.

7. After the updating process is finished, you will be asked you to reboot the system. Click OK to reboot.





BIOS Update Utility (through a BIOS file)

1. Installing BIOS Update Utility from the DVD Driver.

2. Download the proper BIOS from http://www.biostar.com.tw/

3. Launch BIOS Update Utility and click the Update BIOS button on the main screen.

15


4. A warning message will show up to request your agreement to start the BIOS update. Click OK to start the update procedure.

5. Choose the location for your BIOS file in the system. Please select the proper BIOS file, and then click on Open . It will take several minutes, please be patient.

6. After the BIOS Update process is finished, click on OK to reboot the system.





Backup BIOS

Click the Backup BIOS button on the main screen for the backup of

BIOS, and select a proper location for your backup BIOS file in the system, and click Save .

16

J1800NHP/J1800NP/J1900NHP/J1900NP

3.3 Software

Installing Software

1. Insert the Setup DVD to the optical drive. The driver installation program would appear if the Auto-run function has been enabled.

2. Select , and then click on the respective software title.

3. Follow the on-screen instructions to complete the installation.

Launching Software

After the installation process is completed, you will see the software icon showing on the desktop. Double-click the icon to launch it.

Note1: All the information and content about following software are subject to be changed without notice. For better performance, the software is being continuously updated.

Note2: The information and pictures described below are for your reference only. The actual information and settings on board may be slightly different from this manual.

BIOScreen Utility

This utility allows you to personalize your boot logo easily. You can choose BMP as your boot logo so as to customize your computer.

Please follow the step-by-step instructions below to update boot logo:

 Load ： Choose the picture as the boot logo.

 Transform ： Transform the picture for BIOS and preview the result.

 Update ： Write the picture to BIOS Memory to complete the update.

17


eHot-Line

eHot-Line is a convenient utility that helps you to contact with our Tech-Support system.

This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.

Note: Before you use this utility, please set Outlook Express as your default e-mail client application program.

* must provide. Without this information, you may not be able to send out the mail.

This block will show the information which would be collected in the mail.

* Describe condition of your system.

* Select your area or the area close to you.

Provide the e-mail address that you would like to send the copy to.

* Provide the name of the memory module manufacturer.

Send the mail out.

Exit this dialog.

Save these information to a .txt file

Provide the name of the power supply manufacturer and the model no.

After filling up this information, click

“ Send ” to send the mail out. A warning dialog would appear asking for your confirmation; click “ Send ” to confirm or “ Do Not Send ” to cancel.

If you want to save this information to a .txt file, click “ Save As… ” and then you will see a saving dialog appears asking you to enter file name.

18

J1800NHP/J1800NP/J1900NHP/J1900NP

Enter the file name and then click

“ Save ”. Your system information will be saved to a .txt file.

Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail.

Note1: We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.

Note2: If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following website http://www.biostar.com.tw/app/en/about/contact.php

for getting our contact information.

19


Smart Connect Technology

Intel® Smart Connect Technology is designed to update programs by periodically waking your computer from sleep/standby mode for a short time. This function works with applications that automatically get their data from the Internet.

System Requirement:

 Intel Smart Connect Technology enabled in BIOS Setup

 Set the “ACPI Sleep State” to S3 in BIOS Setup.

 Windows 7, Windows 8 and Windows 8.1

 Normal internet connection

Configuring Intel Smart Connect Technology

Step 1: After installing the operating system and motherboard drivers, install the Intel

Smart Connect Technology application. Restart your computer when completed.

Step 2: Click on start menu and input "regedit" in the search bar. Press enter to open the registry editor. Look for the following directory in the registry editor:

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Intel\Intel Smart Connect Technology

Right-click on Intel Smart Connect Technology and select New > Key . Type “OEM”.

Note: Intel Smart Connect Technology is for S3 mode only. During the updating process, the monitor will not light up and no sound will be output from the speaker.

Step 3: As shown in the screenshot below, right-click on OEM, select New >

Multi-String Value, and type “WhiteList”. Double-click WhiteList and type the application name to be added in Edit Multi-String. For example, to add Microsoft Live

Mail, type “wlmail.exe”. Restart your computer when completed.

20

Step 4: After completing the steps above, go to Start\All Programs\Intel and launch

Intel(R) Smart Connect Technology.

J1800NHP/J1800NP/J1900NHP/J1900NP

Configuration Utility

The Intel Smart Connect Technology Configuration Utility allows configuration of the sleep duration, extended hours sleep duration, and viewing of the Event

History along with other settings. To launch the application, select the application

“Intel® Smart Connect Technology in the Start menu (Windows* 7) or Start screen

(Windows* 8/8.1) to launch the configuration GUI. Once launched, the following is presented:

Note: For detailed setting of Intel® Smart Connect Technology, please check the below link. http://www.intel.com/support/services/smartconnect/sb/CS-033109.htm

21


CHAPTER 4: USEFUL HELP

Installation

After you installed your operating system, please insert the Fully Setup Driver

DVD into your optical drive and install the driver for better system performance.

You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver DVD.

Click on the Manual icon to browse for available manuals.

Note1: If this window didn’t show up after you insert the Driver DVD, please use file browser to locate and execute the file SETUP.EXE under your optical drive.

Note2: You will need Acrobat Reader to open the manual file. Please download the latest version of

Acrobat Reader software from http://get.adobe.com/reader/

Note3: Intel(R) Trusted Execution Engine Interface Driver is only supported with Windows 8/8.1&

Windows 7. For Windows 7 user, please install Microsoft Kernel-Mode Driver Framework (KMDF) version 1.1. Otherwise, you found a yellow bang appears as "Intel Trusted Execution Engine

Interface" under system device manager. Also, you can follow the Microsoft instructions from the link: KB2685811. http://support.microsoft.com/kb/2685811

22

POST BIOS Beep Codes

Number of Beeps

J1800NHP/J1800NP/J1900NHP/J1900NP

4.2 AMI BIOS Beep Code

Boot Block Beep Codes

Number of Beeps

Continuing

Description

Memory sizing error or Memory module not found

Description

8 Display memory error (system video adapter)

4.3 Troubleshooting

Probable Solution

1. There is no power in the system. Power

LED does not shine; the fan of the power supply does not work

2. Indicator light on keyboard does not shine.

System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running.

1. Make sure power cable is securely plugged in.

3. Contact technical support.

Using even pressure on both ends of the

DIMM, press down firmly until the module snaps into place.

System does not boot from a hard disk drive, but can be booted from optical drive.

System only boots from an optical drive.

Hard disks can be read, applications can be used, but system fails to boot from a hard disk.

Screen message shows “Invalid

Configuration” or “CMOS Failure.”

System cannot boot after user installs a second hard drive.

1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup.

2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time.

1. Back up data and applications files.

2. Reformat the hard drive. Re-install applications and data using backup disks.

Review system’s equipment. Make sure correct information is in setup.

1. Set master/slave jumpers correctly.

2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives.

23


CPU Overheated

If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

2. Wait for seconds.

3. Power on the system again.

24

J1800NHP/J1800NP/J1900NHP/J1900NP

APPENDIX: SPEC IN OTHER LANGUAGES

Arabic

تﺎﻔﺻاﻮﻤﻟا



DDR3L 1066/1333 (1.35V/1.5V) .

را .

يد .

يد ﺔﺟودﺰﻣ ةﺎﻨﻗ ﻢﻋﺪﺗ

ﺖﻳﺎﺑﺎﺠﻴﺟ 16 ﻰﺼﻗأ ﺪﺤآ ﻞﻤﺤﺘﺗ ، SO-DIMM ﺔﺟو دﺰﻤﻟا ةﺮآاﺬﻟا تﺎﺤﺘﻓ DDR3L .

را .

يد .

يد x 2

ةﺮآاذ

را .

يد .

يد ﺖﻳﺎﺑﺎﺠﻴﺟ 8 / 4 / 2 / 1 / ﺖﻳﺎﺑ ﺎﺠﻴﻣ 512 ECC نود ﻞﻤﺤﺘﺗ DIMM ﺔﺟودﺰﻣ ﺔﺤﺘﻓ ﻞآ

.

ةﺮآاﺬﻟا ﻢﻋد ﺔﻤﺋﺎﻘﻟ www.biostar.com.tw

DDR3L

ﻊﻗﻮﻤﻟا ﻰﻟإ عﻮﺟﺮﻟا ﻰﺟﺮﻳ *

ﺔﻴﻧﺎﺜﻟا / ﺖﻳﺎﺑ ﺎﺠﻴﺟ SATA3 ﺎﺗﺎﺳ x 2 ﺔﻠﺻو

AHCI / IDE مﻷا ﺪﻳار ﻞﻤﺤﺘﺗ

Realtek RTL 8111G

ﺔﺟودﺰﻤﻟا ىﻮﺼﻘﻟا ةرﺪﻘﻟا / ﻒﺼﻨﻟا ، ﻲﺋﺎﻘﻠﺗ ﺪﻳﺪﺤﺗ ، ﺔﻴﻧﺎﺜﻟا / ﺖﻳﺎﺑﺎﺠﻴﻣ 1000 / 100 / 10

ALC662

ﺔﻗﺪﻟا ﺔﻴﻟﺎﻋ تاﻮﻨﻗ 5.1

عزﻮﻤﻟا لﻼﺧ ﻦﻣ 4 و ﺔﻴﻔﻠﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ 2 ) 2.0

USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x 6 ﺬﻓﺎﻨﻣ

( ﻲﻠﺧاﺪﻟا

( ﺔﻴﻔﻠﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ 1 ) 3.0

USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ

PCI x 1 ﺬﻓﺎﻨﻣ

ﺔﻴﻓﺎﺿﻹا تﺎﻘﺤﻠﻤﻟا ﺬﻔﻨﻣ ﺔﺤﺘﻓ x 1

ةرﺎﻔﻟا PS/2 x 1

ﺮﺗﻮﻴﺒﻤﻜﻠﻟ ﺢﻴﺗﺎﻔﻤﻟا ﺔﺣﻮﻟ PS/2 x 1

( J1800NHP/J1900NHP) حﻮﺿﻮﻟا ﻲﻟﺎﻌﻟا دﺪﻌﺘﻣ ﻂﻴﺳو HDMI x 1 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ

( J1800NP/J1900NP) ﺔﻌﺑﺎﻄﻠﻟ ﺔﺤﺘﻓ x 1 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ

( J1800NP/J1900NP) ﺔﻴﻠﺴﻠﺴﺗ ﺔﺤﺘﻓ x 1 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ

VGA ﻲﺋﺮﻤﻟا ضﺮﻌﻟا ﺔﻣﻮﻈﻨﻣ x 1 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ

LAN ﺔﻴﻠﺤﻤﻟا ﺔﻜﺒﺸﻟا x 1 دﺪﻋ ﻞﻴ ﺻﻮﺘﻟ ﺔﺤﺘﻓ

3.0

USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x 1 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ

2.0

USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x 2 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ

تﻮﺼﻠﻟ كﺎﺟ x 3 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ

ﺔﻴﻧﺎﺜﻟا / ﺖﻳﺎﺑﺎﺠﻴﺟ 3 SATA x 2 ﺔﻠﺻو

( 2.0

USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ ﻦﻴﺘﺤﺘﻓ ﻞﻤﺤﺘﻳ عزﻮﻣ ﻞآ ) 2.0

USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x 2 عزﻮﻣ

ﺲﻴﺑﺎﺑد 4 x 1 ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻو

سﻮﺑد 24 x 1 ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻو

ﺔﻣﻮﻈﻨﻤﻟا ﺪﻳﺮﺒﺗ حواﺮﻣ x 2 ﺔﻠﺻو

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا x 1 عزﻮﻣ

ﻲﻣﺎﻣﻷا تﻮﺼﻟا x 1 عزﻮﻣ

ﺮﺷﺎﺒﻣ سﻮﻤﻴﺳ x 1 عزﻮﻣ

ﺔﻴﻠﺴ ﻠﺴﺗ ﺔﺤﺘﻓ x 1 عزﻮﻣ

ﺔﻴﻤﻗﺮﻟا ﺔﻬﺟاﻮﻟا ﺲﺒﻴﻠﻴﻓ ﻲﻧﻮﺳ S/PDIF ﺔﻴﺟرﺎﺧ x 1 ﺔﻠﺻو

ﻢﻣ 170 x ﻢﻣ 170 ، Mini-ITX ﺔﻣﺪﻘﺘﻤﻟا ﺎﻴﺟﻮﻟﻮﻨﻜﺘﻟا دﺪﻣ ﻞﻜﺷ ﻞﻣﺎﻋ

Windows 7 / 8 / 8.1 ب ﺲآإ زوﺪﻨﻳو

.

رﺎﻈﻧأ نوﺪﺑ وأ ﻊﻣ ﻞﻴﻐﺸﺗ مﺎﻈﻧ يﻷ ﻢﻋﺪﻟا ﺔﻟزأ وأ ﺔﻓﺎﺿإ ﻖﺤﺑ ﻆﻔﺘﺤﺗ BIOSTAR رﺎﺘﺳﻮﻴﺑ

ةﺪﺣو ةﺪﻋﺎﻗ

ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا

ةﺮآاﺬﻟا

ﻦﻳﺰﺨﺘﻟا

LAN ﺔﻴﻠﺤﻣ ﺔﻜﺒﺷ

ﻲﺗﻮﺼﻟا ﺰﻴﻣﺮﺘﻟا

مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ

USB

ﻊﺳﻮﺘﻟا تﺎﺤﺘﻓ

جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا

ﺔﻴﻔﻠﺨﻟا

جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا

ﺔﻴﻠﺧاﺪﻟا

ﻞﻜﺸﻟا ﻞﻣﺎﻋ

ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻧأ

ﺔﻣﻮﻋﺪﻤﻟا

25


French

Support Unité

Centrale

Mémoire

Stockage

Réseau local

Codec audio

USB

Spécifications



Supporte mémoire DDR3L double canal 1333 (1.35V/1.5V)

Banc de mémoire 2 x DDR3L SO-DIMM, Supporte max. jusqu’à une mémoire de 16 GB

Chaque module DIMM supporte module DDR3L non-ECC 512MB/ 1/ 2/ 4/ 8 GB

* Veuillez vous reporter à www.biostar.com.tw

pour la liste des soutien de la mémoire.

Connecteur 2 x SATA 3Gb/s

Supporte système indigène IDE & AHCI mode

Realtek RTL 8111G

10/ 100/ 1000 Mb/s auto négociation, capacité bidirectionnelle à l'alternat / bidirectionnelle simultanée

ALC662, Canaux 5.1, écoute audio de haute définition

Port 6x USB 2.0 (2 sur les I/O arrières et 4 en interne)

Port 1x USB 3.0 (1 sur les I/O arrières)

Connecteur d’extension

1x PCI Fente

I/O arrirèes

I/O en interne

1x PS/2 Clavier

1x PS/2 Souris

1x Embase port imprimante (J1800NP/J1900NP)

1x Embase port série (J1800NP/J1900NP)

1x Port HDMI (J1800NHP/J1900NHP)

1x Port VGA

1x port LAN

1x Port USB 3.0

2x Port USB 2.0

3x entrées audio

2x Connecteur SATA 3.0Gb/s

2x embases USB 2.0 (chaque embase supporte 2 Ports USB 2.0)

1x 4-Broche de carte

1x 24-Broche de carte

2x Connecteur ventilateur système

1x Fiche panneau avant

1x Fiche audio avant

1x Fiche mémoire CMOS vide

1x Embase port série

1x Connecteur sortie S/PDIF

Facteur d'encombremen t

Facteur d'encombrement Mini-ITX, 170 mm x 170 mm

Support SE

Windows 7 / 8 / 8.1

Biostar se réserve le droit d’ajouter ou d'enlever le support pour toute SE avec ou sans préavis.

26

J1800NHP/J1800NP/J1900NHP/J1900NP

German

CPU-Unterstützun g

Festplattenspeich er

Arbeitsspeicher

LAN

Audio-Codec

USB

Spezifikationen



Unterstützt zweikanaliges DDR3L 1333 (1.35V/1.5V)

2 x DDR3L SO-DIMM-SpeicherSlot, Max. Uterstützung bis zu 16

GB-Speicher

Jedes DIMM unterstützt nicht-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L-Module

* Bitte konsultieren Sie www.biostar.com.tw

für für Speicherunterstützung

Liste.

2x SATA 3Gb-Verbindung

Unterstützt Ureinwohner IDE & AHCI Modus

Realtek RTL 8111G

10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig

ALC662, 5.1 Kanäle, HD-Audio

6x USB 2.0-Port (2 hintere I/Os und 4 via interne Header)

1x USB 3.0-Port (1 hintere I/Os)

Erweiterungsansc hlüsse

1x PCI-Slot

Hintere I/Os

Interne I/Os

Formfaktor

OS-Unterstützung

1x PS/2-Maus

1x PS/2-Keyboard

1x für Druckerport Port (J1800NP/J1900NP)

1x Serieller Port (J1800NP/J1900NP)

1x HDMI-Port (J1800NHP/J1900NHP)

1x VGA-Port

1x LAN-Port

1x USB 3.0-Port

2x USB 2.0-Port

3x Audio Jack

2x SATA 3.0Gb/s-Verbinung

2x USB 2.0-Header (jeder Header unterstützt 2 USB 2.0-Ports)

1x 4-Pin-Stromverbindung

1x 24-Pin-Stromverbindung

2x System-Ventilatorverbindung

1x Header für Frontpanel

1x Header für Frontaudio

1x Header für klares CMOS

1x Serieller Port-Header

1x S/PDI-Auswurfsverbindung

Mini-ITX Formfaktor, 170 mm x 170 mm

Windows 7 / 8 / 8.1

Biostar reserves the right to add or remove support for any OS with or without notice.

27


Italian

Specificazioni

Supporto processore

Memoria

Memorizzazione

Catena

Codec Audio

USB



Supporta DDR3L 1333 Doppio Canale (1.35V/1.5V)

2 x DDR3L SO-DIMM Slot di Memoria Supporta fino a 16 GB Memoria

Ogni DIMM supporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L moduli

* Si prega di consultare www.biostar.com.tw

per la lista di supporto del memoria.

Connettore 2x SATA 3Gb/s

Supporta nativo IDE & AHCI modo

Realtek RTL 8111G

10/ 100/ 1000 Mb auto negoziazione, capacita di duplex Meta / Completo

ALC662

Canali Audio di Alta Definizione 5.1

Slot 6x USB 2.0 (2 nei ingressi/ uscite posteriore e 4 da distributori interni)

Slot 1x USB 3.0 (1 nei ingressi/ uscite posteriore)

Slot di espansione

Slot 1x PCI

Ingressi/ Uscite

Posteriore

Mouse 1x PS/2

Tastiera 1x PS/2

Slot Stampante x1 (J1800NP/J1900NP)

Slot Serie x1 (J1800NP/J1900NP)

Slot 1x HDMI (J1800NHP/J1900NHP)

Slot 1x VGA

Slot 1x LAN

Slot 1x USB 3.0

Slot 2x USB 2.0

Jack audio 3x

Connettore 2x SATA 3.0Gb/s

Ingressi/ Uscite

Interni

Distributore 2x USB 2.0(ogni distributore supporta 2 slot USB 2.0)

Connettore con 4 pin x1

Connettore con 24 pin x1

Connettore Ventilatore Sistema x2

Distributore Pannello Frontale x1

Distributore Audio Frontale x1

Distributore CMOS Diretto x1

Distributore Slot Serie x1

Connettore esterno S/PDIF x1

Fattore di Forma Fattore di Forma Mini-ITX, 170 mm x 170 mm

Supporto SO

Windows 7 / 8 / 8.1

Biostar si riserva il diritto di aggiungere o ritirare il supporto per qualsiasi SO con o senza preavviso.

28

J1800NHP/J1800NP/J1900NHP/J1900NP

Japanese

仕仕

CPU サポート



メモリ

LAN

保存スペース

デュアルチャンネル DDR3L 1333 をサポート (1.35V/1.5V)

2 x DDR3L SO-DIMM メモリスロット、最大 16GB メモリまでサポート

各 DIMM は、非 -ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L モジュールをサポート

しています

* サポートされているメモリのリストについては、 www.biostar.com.tw

を参照

してください。

2x SATA 3Gb/s コネクタ

ネイティブ IDE & AHCI モードのサポート

Realtek RTL 8111G

10/ 100/ 1000 Mb/s オートネゴーシエーション、半 / 全二重通信

オーディオ

デック

USB

内蔵 I/O

コー ALC662

5.1 チャンネル , ハイデフィニションオーディオ

6x USB 2.0 ポート ( 後部 I/O に 2 つ及び内蔵ヘッダー経由に 4 つ )

1x USB 3.0 ポート ( 後部 I/O に 1 つ )

拡張スロット 1x スロット

1x PS/2 キーボード

1x PS/2 マウス

1x プリンターポート (J1800NP/J1900NP)

1x シリアルポート (J1800NP/J1900NP)

1x HDMI ポート (J1800NHP/J1900NHP)

後部 I/O

1x VGA ポート

1x LAN ポート

1x USB 3.0 ポート

2x USB 2.0 ポート

3x オーディオジャック

2x SATA 3.0Gb/s コネクタ

2x USB 2.0 ヘッダー ( 各ヘッダーは、 2 つの USB 2.0 ポートをサポートして

います )

1x 4-Pin パワーコネクタ

1x 24-Pin パワーコネクタ

2x システムファンコネクタ

1x フロントパネルヘッダー

1x フロントオーディオヘッダー

1x クリア CMOS ヘッダー

1x シリアルポートヘッダー

1x S/PDIF アウトコネクタ

フォームファク

タ

Mini-ITX フォームファクタ、 170 mm x 170 mm

サポート OS

Windows 7 / 8 / 8.1

Biostar には、通知なしでサポート OS を変更する権限があります。

29


Polish

Specyfikacje techniczne

Obs ł uga procesora



Pojedynczy pami ę ci DDR3L 1333 Dwukana ł owa (1.35V/1.5V)

2x DDR3L SO-DIMM Pami ęć Gniazda procesora (Slot), Maksymalna wielko ść pami ę ci 16 GB

Pami ęć

Ka ż dy DIMM obs ł uguje jeden modu ł non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L

* Prosz ę sprawdzi ć list ę obs ł ugiwanych pami ęć na stronie internetowej www.biostar.com.tw

Przechowywanie Z łą cze 2x SATA 3Gb/s, Obs ł uga rodzimy IDE & AHCI tryb

LAN

Realtek RTL 8111G

10/ 100/ 1000 Mb auto negocjacja, pojemno ść dupleks Po ł owe / Pe ł ny

Codec Audio

USB

ALC662

Kana ł y Audio wysokiej Definicji 5.1

6 x z łą cza USB 2.0 (2 przez tylne porty wej ś cia/ wyj ś cia oraz 4 przez wewn ę trzne porty)

1x z łą cza USB 3.0 (1 przez tylne porty wej ś cia)

Z łą cza rozszerze ń z łą cza 1x PCI

Tylne porty wej ś cia/ wyj

Wewn wej ś ę ś cia trzne porty cia/ wyj ś cia

Myszka 1x PS/2

Klawiatura 1x PS/2

Porty 1x Z łą cze drukarki (J1800NP/J1900NP)

Porty 1x szeregowy (J1800NP/J1900NP)

Porty 1x HDMI (gniazdo) (J1800NHP/J1900NHP)

Porty 1x VGA

Porty 1x LAN

Porty 1x USB 3.0

Porty 2x USB 2.0

Porty audio 3x

Z łą cza 2x SATA 2.0Gb/s

Z łą cza 2x USB 2.0 (ka ż de z łą cze obs ł uguje dodatkowe 2 porty USB 2.0)

Z łą cza 4 pionowe x 1

Z łą cza 24 pionowe x 1

Z łą cze wentylatora obudowy x2

Z łą cze przedniego panelu x1

Z łą cze audio przedniego panelu x1

Z łą cze bezpo ś rednie CMOS x1

Port szeregowy x1

Port zewn ę trzny S/PDIF x1

Obudowa

Obs ł uga OS

Obudowa Mini-ITX, 170 mm x 170 mm

Windows 7 / 8 / 8.1

Biostar zastrzega sobie prawo do dodania lub wycofania obs ł ugi dla OS, z wypowiedzeniem lub bez wypowiedzenia.

30

J1800NHP/J1800NP/J1900NHP/J1900NP

Portuguese

Especificações

Suporte

Processador



Suporta DDR3L 1333 Canal Duplo (1.35V/1.5V)

2 x DDR3L SO-DIMM Slot de memória Suporta até 16 GB Memória

Cada DIMM suporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L módulo Memória

* Por favor consulte www.biostar.com.tw

para obter uma lista de suporte do memória.

Armazenamento Conector 2x SATA 3Gb/s,Suporta nativo IDE & AHCI modo

LAN

Realtek RTL 8111G

10/ 100/ 1000 Mb auto negociação, capacidade duplex Metade / Cheio

Codec de Audio

ALC662

Canais de Áudio de Alta Definição 5.1

USB

Porta 6x USB 2.0 (2 nas entradas/saídas traseiras e 4 pelos Dispositivos internos)

Porta 1x USB 3.0 (1 nas entradas/saídas traseiras)

Slots de expansão

Porta 1x PCI

Entradas/Saídas no painel traseiro

Conectores na placa

Mouse 1x PS/2

Teclado 1x PS/2

Porta 1x Impressora (J1800NP/J1900NP)

Porta 1x Série (J1800NP/J1900NP)

Porta 1x HDMI (J1800NHP/J1900NHP)

Porta 1x VGA

Porta 1x LAN

Porta 1x USB 3.0

Porta 2x USB 2.0

Soquete audio 3x

Conector 2x SATA 3.0Gb/s

Dispositivo 2x USB 2.0 (cada Dispositivo suporta 2 portas USB 2.0)

Conector de 4 pinos x1

Conector de 24 pinos x1

Conector de Ventoinha Sistema x2

Dispositivo Painel Frontal x1

Dispositivo de Audio Frontal x1

Dispositivo CMOS Direct x1

Dispositivo Porta Série x1

Conector Externo S/PDIF x1

Fator de Fôrma Fator de Fôrma Mini-ITX, 170 mm x 170 mm

Windows 7 / 8 / 8.1

Suporte OS Biostar reserva seu direito de adicionar ou retirar o suporte para qualquer OS com ou sem notificação.

31


Russian

Спецификации

Поддержка центрального процессора



Память

USB

Накопитель

Локальная

Аудиокодек сеть

Поддерживает двухканальный DDR3L 1333 (1.35V/1.5V)

2 гнезда платы памяти DDR3L SO-DIMM, максимальная память до 16 Гб

Каждый модуль DIMM поддерживает модуль не -ECC 512 Мб / 1/ 2/ 4/ 8 Гб

DDR3L

* Перечень поддержки памяти смотрите на www.biostar.com.tw

.

Соединитель 2x SATA 3 Гб / с , Поддерживает родной IDE & AHCI режим

Realtek RTL 8111G

Автосогласование 10/ 100/ 1000 Мб / с , работает в полно / полудуплексном режиме

ALC662

Каналы 5.1, высококачественное аудио

6 порта USB 2.0 (2 сзади ввода вывода и 4 через внутренние контакты )

1 порта USB 3.0 (1 сзади ввода вывода )

Гнезда расшир . 1x гнездо

1 мышь PS/2

1 клавиатура PS/2

Задняя ввода плата вывода

1 порта принтера (J1800NP/J1900NP)

1 последовательного порта (J1800NP/J1900NP)

1 порт HDMI (J1800NHP/J1900NHP)

1 порт VGA

1 порт локальной сети

1 порта USB 3.0

2 порта USB 2.0

3 гнезд для подключения наушников

Внутр ввода

.

-

Плата

Конструктив

Поддержка вывода

ОС

Соединитель 2x SATA 3 Гб / с

2 контакта USB 2.0 ( каждый контакт поддерживает 2 порта USB 2.0)

1 4выводный разъем питания

1 24выводный разъем питания

2 разъема вентилятора системы

1 контакт передней панели

1 контакт передней аудиопанели

1 контакт микросхемы Clear CMOS

1 контакт последовательного порта

1 соединитель S/PDIF-Out

Форм фактор Mini-ITX, 170 мм x 170 мм

Windows 7 / 8 / 8.1

Biostar оставляет за собой право добавлять или удалять поддержку любой ОС , с уведомлением или без .

32

J1800NHP/J1800NP/J1900NHP/J1900NP

Spanish

Especificaciones

Compatibilidad con el procesador

Memoria



Soporta DDR3L 1333 Doble Canal (1.35V/1.5V)

2x DDR3L SO-DIMM Ranura de memoria Soporta hasta 16 GB Memoria

Cada DIMM soporta un modulo non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L

*Por favor consultar con www.biostar.com.tw

para la lista de compatibilidad con el memoria.

Almacenamiento de información

Conector 2x SATA 3Gb/s, Soporta nativo IDE & AHCI modo

LAN

Códec Audio

USB

Realtek RTL 8111G

10/ 100/ 1000 Mb/s auto negociación, capacidad dúplex Mitad/Completo

ALC662, Canales Audio de Alta Definición 5.1

Ranura 6x USB 2.0 (2 en las entradas/salidas posteriores y 4 por los distribuidores internos)

Ranura 1x USB 3.0 (1 en las entradas/salidas posteriores)

Ranuras de

Extinción

Ranura 1x PCI

Panel trasero de

E/S

Conectores en placa

Ratón 1x PS/2

Teclado 1x PS/2

Ranura Impresora x1 (J1800NP/J1900NP)

Ranura Serie x1 (J1800NP/J1900NP)

Ranura 1x HDMI (J1800NHP/J1900NHP)

Ranura 1x VGA

Ranura 1x LAN

Ranura 1x USB 3.0

Ranura 2x USB 2.0

Socket audio 3x

Conector 2x SATA 3Gb’s

Distribuidor 2x USB 2.0 (cada distribuidor soporta 2 ranuras USB 2.0)

Conector con 4 patillas x1

Conector con 24 patillas x1

Conector Ventilador Sistema x2

Distribuidor Panel Frontal x1

Distribuidor Audio Frontal x1

Distribuidor CMOS Directo x1

Distribuidor Ranura Serie x1

Conector Externo S/PDIF x1

Factor de Forma Factor de Forma Mini-ITX, 170 mm x 170 mm

Soporte OS

Windows 7 / 8 / 8.1

Biostar reserva su derecho de añadir o retirar el soporte para cada OS con o sin notificación.

2014/08/07

33

Biostar J1800NP Motherboard Manual

FCC Information and Copyright

CHAPTER 1: INTRODUCTION

1.1 Before You Start

1.3 Motherboard

1.4 Rear Panel Connectors

J1800NHP/J1900NHP

J1800NP/J1900NP

1.5 Central Processing Unit (CPU)

CHAPTER 2: HARDWARE INSTALLATION

SYS_FAN1/2: System Fan Header

A. DDR3L SO-DIMM Module (1.35V/1.5V)

B. Memory Capacity

C. Dual Channel Memory Installation

PCI1: Peripheral Component Interconnect Slots

Install an Expansion Card

JCMOS1: Clear CMOS Header

2.5 Headers & Connectors

ATXPWR1: ATX Power Source Connector

ATXPWR2: ATX Power Source Connector

PANEL1: Front Panel Header

SATA1/2: Serial ATA Connectors

F_USB1/2: Header for USB 2.0 Ports at Front Panel

F_AUDIO1: Front Panel Audio Header

JSPDIFOUT1: Digital Audio-out Connector

COM1: Serial Port Connector (Serial Port 1)

CHAPTER 3: UEFI BIOS & SOFTWARE

3.1 UEFI BIOS Setup

BIOSTAR BIOS Flasher

BIOS Update Utility (through the Internet)

BIOS Update Utility (through a BIOS file)

3.3 Software

Installing Software

Launching Software

BIOScreen Utility

eHot-Line

Smart Connect Technology

System Requirement:

Configuring Intel Smart Connect Technology

Configuration Utility

CHAPTER 4: USEFUL HELP

Installation

A. Driver Installation

B. Software Installation

C. Manual

POST BIOS Beep Codes

4.2 AMI BIOS Beep Code

Boot Block Beep Codes

4.3 Troubleshooting

CPU Overheated

APPENDIX: SPEC IN OTHER LANGUAGES

Arabic

French

German

Italian

Japanese

Polish

Portuguese

Russian

Spanish

Related manuals

Biostar

J1900MH2

Biostar

N3150NH

Biostar

J1800NH3

Biostar

J1800NH3

Biostar

Hi-Fi H81S2

Biostar

B85MG 6.x

Biostar

H81MHP Ver. 6.x

Biostar

Hi-Fi B85N 3D Ver. 5.x

Biostar

H81MGP2 Ver. 6.x

Biostar