STB300NH02L
STP300NH02L
N-channel 24V - 120A - TO-220 / D
2
PAK
STripFET™ Power MOSFET
Preliminary Data
Features
Type
STB300NH02L
STP300NH02L
V
DSS
24V
24V
R
DS(on)
Max
< 1.8m
Ω
< 2.2m
Ω
■
■
■
■
R
DS(on)
*Q g
industry’s benchmark
Conduction losses reduced
Switching losses reduced
Low profile, very low parasitic inductance
I
D
120A
120A
Description
This product utilizes the latest advanced design rules of ST’s proprietary STripFET™ technology.
This is suitable for high current OR-ing application.
TO-220
1
2
3
D²PAK
1
3
Figure 1.
Internal schematic diagram
Applications
■ Switching application
– Specifically designed and optimized for high efficiency DC/DC converters
– OR-ing
Device summary
Order codes
STP300NH02L
STB300NH02L
Marking
P300NH02L
B300NH02L
Package
TO-220
D²PAK
Packaging
Tube
Tape & reel
September 2007 Rev 2
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
1/14 www.st.com
14
5
6
3
4
1
2
Contents
Contents
STB300NH02L - STP300NH02L
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Obsolete Product(s) - Obsolete Product(s)
2/14
STB300NH02L - STP300NH02L Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Parameter
V
DS
V
GS
I
D
(1)
I
D
(1)
I
DM
(2)
P
TOT
(3)
Drain-source voltage (V
Gate-source voltage
GS
= 0)
Drain current (continuous) at T
C
Drain current (continuous) at T
C
Drain current (pulsed)
Total dissipation at T
C
= 25°C
Derating factor
T j
Operating junction temperature
1.
This value is silicon limited
2.
Pulse width limited by safe operating area
3.
This value is rated according Rthj-case
= 25°C
= 100°C
Table 3.
Symbol
Thermal data
Parameter
Rthj-case Thermal resistance junction-case max
Value
24
± 20
120
120
480
300
2
-55 to 175
Value
0.5
62.5
Unit
°C/W
°C/W
Table 4.
Symbol
Avalanche characteristics
Parameter
I
AV
Not-repetitive avalanche current
(pulse width limited by Tj max)
E
AS
(1)
Single pulse avalanche energy
1.
Starting Tj = 25°C, I
D
= I
AV
, V
DD
= 20V
Max value
60
1.6
Obsolete Product(s) - Obsolete Product(s)
Unit
A
J
Unit
V
V
A
A
A
W
W/°C
°C
3/14
Electrical characteristics STB300NH02L - STP300NH02L
(T
CASE
=25°C unless otherwise specified)
Table 5.
On/off states
Symbol Parameter Test conditions
V
(BR)DSS
I
DSS
Drain-source breakdown voltage
I
D
= 1mA, V
GS
= 0
Zero gate voltage drain current (V
GS
= 0)
V
DS
= 20V,
V
DS
= 20V, T c
=125°C
I
GSS
Gate body leakage current (V
DS
= 0)
V
DS
= ±20V
V
GS(th)
Gate threshold voltage V
DS
= V
GS
, I
D
= 250µA
R
DS(on)
Static drain-source on resistance
V
GS
= 10V, I
D
= 80A
R
DS(on)
Static drain-source on resistance
V
GS
= 10V, I
D
= 80A
@100°C
TO-220
D²PAK
TO-220
D²PAK
Min.
Typ.
Max.
Unit
24
1
1.8
1.4
2.7
2.1
1
10
2
2.2
1.8
V
µA
µA
±100 nA
V m Ω m Ω m Ω m Ω
Table 6.
Symbol
C iss
C oss
C rss
Q g
Q gs
Q gd
Dynamic
Parameter
Input capacitance
Output capacitance
Reverse transfer capacitance
Total gate charge
Gate-source charge
Gate-drain charge
R
G
Gate input resistance
Test conditions
V
DS
= 15V, f = 1 MHz, V
GS
=0
V
DD
= 12V,I
D
= 120A,
V
GS
= 10V
(see Figure 14)
f=1 MHz Gate DC Bias = 0
Test signal level = 20mV open drain
Min.
Typ.
Max.
Unit
7055
3251
307
109.4
30.2
26.4
4.4
pF pF pF nC nC nC
Ω
Obsolete Product(s) - Obsolete Product(s)
4/14
STB300NH02L - STP300NH02L Electrical characteristics
Table 7.
Symbol
Switching times
Parameter t d(on) t r
Turn-on delay time
Rise time t d(off) t f
Turn-off delay time
Fall time
Test conditions
V
DD
= 10V, I
D
= 60A
R
G
= 4.7
Ω , V
GS
= 10V,
(see Figure 13)
V
DD
= 10V, I
D
= 60A
R
G
= 4.7
Ω , V
GS
= 10V,
(see Figure 13)
Min.
Typ.
Max.
Unit
18
275 ns ns
138
94.4
ns ns
Table 8.
Symbol
Source drain diode
Parameter Test conditions
I
SD
I
SD
V
SD
(1) t rr
Q rr
I
RRM t rr
Q rr
I
RRM
Source-drain current
Source-drain current (pulsed)
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
I
SD
I
SD
= 120 A, V
GS di/dt = 100A/µs
T j
SD
= 120A, V
= 25°C
DD
= 20V,
(see Figure 18)
di/dt = 100A/µs
T j
1.
Pulsed: pulse duration = 300µs, duty cycle 1.5%
=120A, V
= 150°C
DD
= 0
= 20V
(see Figure 18)
Min Typ.
Max Unit
63
85
2.7
63.2
88
2.8
120
640
1.3
A
A
V ns nC
A ns nC
A
Obsolete Product(s) - Obsolete Product(s)
5/14
Electrical characteristics
Figure 2.
Safe operating area
STB300NH02L - STP300NH02L
Figure 3.
Thermal impedance
Figure 4.
Output characteristics Figure 5.
Transfer characteristics
Figure 6.
Static drain-source on resistance Figure 7.
Normalized BV
DSS
vs temperature
Obsolete Product(s) - Obsolete Product(s)
6/14
STB300NH02L - STP300NH02L Electrical characteristics
Figure 8.
Gate charge vs gate-source voltage Figure 9.
Capacitance variations
Figure 10.
Normalized gate threshold voltage vs temperature
Figure 11.
Normalized on resistance vs temperature
Figure 12.
Source-drain diode forward characteristics
Obsolete Product(s) - Obsolete Product(s)
7/14
Test circuit
3 Test circuit
Figure 13. Switching times test circuit for resistive load
STB300NH02L - STP300NH02L
Figure 14. Gate charge test circuit
Figure 15. Test circuit for inductive load switching and diode recovery times
Figure 16. Unclamped inductive load test circuit
Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform
Obsolete Product(s) - Obsolete Product(s)
8/14
STB300NH02L - STP300NH02L
4 Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
Obsolete Product(s) - Obsolete Product(s)
9/14
Package mechanical data
Dim
L
L1
L20
L 3 0
∅
P
Q e1
F
H1
J1
D
D1
E e
A b b 1 c
STB300NH02L - STP300NH02L
TO-220 mechanical data
Min
4.40
0.61
1.14
0.4
9
15.25
10
2.40
4.
9 5
1.2
3
6.20
2.40
1 3
3 .50
3 .75
2.65
mm
Typ
1.27
16.40
2 8 .
9 0
Max
4.60
0.
88
1.70
0.70
15.75
10.40
2.70
5.15
1.
3 2
6.60
2.72
14
3 .
93
3 .
8 5
2.
9 5
Min
0.17
3
0.024
0.044
0.01
9
0.6
0.
393
0.0
9 4
0.1
9 4
0.04
8
0.244
0.0
9 4
0.511
0.1
3 7
0.147
0.104
inch
Typ
0.050
0.645
1.1
3 7
Max
0.1
8 1
0.0
3 4
0.066
0.027
0.62
0.40
9
0.106
0.202
0.051
0.256
0.107
0.551
0.154
0.151
0.116
Obsolete Product(s) - Obsolete Product(s)
10/14
STB300NH02L - STP300NH02L Package mechanical data
Dim
D
D1
E
E1
G
L
L2
L 3
M
R
V2
A
A1
A2
B
B2
C
C2
Min
4.4
2.4
9
0.0
3
0.7
1.14
0.45
1.2
3
8 .
9 5
10
4.
88
15
1.27
1.4
2.4
0° mm
Typ
8
8 .5
0.4
Max
4.6
2.6
9
0.2
3
0.
93
1.7
0.6
1.
3 6
9 .
3 5
10.4
5.2
8
15.
8 5
1.4
1.75
3 .2
4°
D²PAK mechanical data
Min
0.17
3
0.0
98
0.001
0.027
0.044
0.017
0.04
8
0.
3 52
0.
393
0.1
9 2
0.5
9 0
0.50
0.055
0.0
9 4 inch
Typ
0.
3 15
0.
33 4
0.015
Max
0.1
8 1
0.106
0.00
9
0.0
3 6
0.067
0.02
3
0.05
3
0.
3 6 8
0.40
9
0.20
8
0.625
0.55
0.6
8
0.126
Obsolete Product(s) - Obsolete Product(s)
11/14
Packaging mechanical data
5 Packaging mechanical data
D
2
PAK FOOTPRINT
STB300NH02L - STP300NH02L
TAPE AND REEL SHIPMENT
G
N
T
A
B
C
D
REEL MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
330 12.992
1.5
0.059
12.8
13.2
0.504
0.520
20.2
0795
24.4
26.4
0.960
1.039
100 3.937
30.4
1.197
TAPE MECHANICAL DATA
BASE QTY
1000
BULK QTY
1000
DIM.
A0
B0
D
D1
E
F mm inch
MIN.
MAX.
MIN.
MAX.
10.5
10.7
0.413 0.421
15.7
15.9
0.618 0.626
1.5
1.6
0.059 0.063
1.59
1.61
0.062 0.063
1.65
1.85
0.065 0.073
11.4
11.6
0.449 0.456
K0
P0
4.8
3.9
5.0
0.189 0.197
4.1
0.153 0.161
P1 11.9
12.1
0.468 0.476
P2 1.9
2.1
0.075 0.082
R
T
W
50 1.574
0.25
0.35 0.0098 0.0137
23.7
24.3
0.933 0.956
* on sales type
12/14
STB300NH02L - STP300NH02L
Table 9.
Date
Document revision history
Revision
21-Feb-2007
25-Sep-2007
1
2
Changes
First release
Corrected value on
Avalanche characteristics
Revision history
Obsolete Product(s) - Obsolete Product(s)
13/14
STB300NH02L - STP300NH02L
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
Obsolete Product(s) - Obsolete Product(s)
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
14/14
