STB60NF10
STB60NF10-1 - STP60NF10
N-channel 100V - 0.019
Ω
- 80A - TO-220 - D
2
PAK - I
2
PAK
STripFET™ II Power MOSFET
General features
Type
STB60NF10
STB60NF10-1
STP60NF10
V
DSS
(@Tjmax)
100V
100V
100V
■
■
Exceptional dv/dt capability
100% avalanche tested
R
DS(on)
<0.023
Ω
<0.023
Ω
<0.023
Ω
I
D
80A
80A
80A
Description
This Power MOSFET series realized with
STMicroelectronics unique STripFET™ process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced highefficiency, high-frequency isolated DC-DC converters for Telecom and Computer applications. It is also intended for any applications with low gate drive requirements.
Applications
■ Switching application
1
3
D²PAK
I²PAK
1
2
3
1
2
3
TO-220
Internal schematic diagram
Order codes
Part number
STB60NF10T4
STB60NF10-1
STP60NF10
September 2006
Marking
B60NF10
B60NF10
P60NF10
Rev 4
Package
D²PAK
I²PAK
TO-220
Packaging
Tape & reel
Tube
Tube
1/15 www.st.com
15
5
6
3
4
1
2
Contents
Contents
STB60NF10 - STB60NF10 -1 - STP60NF10
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2/15
STB60NF10 - STB60NF10 -1 - STP60NF10 Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Parameter
V
DS
V
GS
I
D
(1)
I
D
I
DM
(2)
P
TOT
Drain-source voltage (V
Gate-source voltage
GS
= 0)
Drain current (continuous) at T
Drain current (continuous) at T
Drain current (pulsed)
C
C
= 25°C
=100°C
Total dissipation at T
C
= 25°C
Derating factor dv/dt
(3)
E
AS
(4)
T stg
Peak diode recovery voltage slope
Single pulse avalanche energy
Storage temperature
1.
Current limited by package
2.
Pulse width limited by safe operating area
3.
I
SD
≤
80A, di/dt
≤
300A/µs, V
DD
≤
(BR)DSS
, T
J
T
JMAX
4.
Starting T
J
= 25 o
C, I
D
= 40A, V
DD
= 30V
Table 2.
Symbol
R thJC
R thJA
T l
Thermal data
Parameter
Thermal resistance junction-case max
Thermal resistance junction-ambient max
Maximum lead temperature for soldering purpose
Value
100
± 20
80
66
320
300
2
16
485
-55 to 175
Value
0.5
62.5
300
Unit
V
V
A
A
A
W
W/°C
V/ns
J
°C
Unit
°C/W
°C/W
°C
3/15
Electrical characteristics STB60NF10 - STB60NF10 -1 - STP60NF10
(T
CASE
=25°C unless otherwise specified)
Table 3.
Symbol
On/off states
Parameter
V
(BR)DSS
Drain-source breakdown voltage
V
R
I
I
DSS
GSS
GS(th)
DS(on)
Zero gate voltage drain current (V
GS
= 0)
Gate body leakage current
(V
DS
= 0)
Gate threshold voltage
Static drain-source on resistance
Test conditions
I
D
= 250
µ
A, V
GS
= 0
V
DS
= Max rating,
V
DS
= Max rating @125°C
V
GS
= ±20V
V
DS
= V
GS
, I
D
= 250µA
V
GS
= 10V, I
D
= 40A
Min.
Typ.
Max.
Unit
100
2 3
1
10
V
µA
µA
±100 nA
4
0.019
0.023
V
Ω
Table 4.
Symbol
Dynamic
Parameter Test conditions g fs
(1)
C
C
C iss oss rss
Forward transconductance V
Input capacitance
Output capacitance
Reverse transfer capacitance
V
V
DS
DS
GS
= 25V, I
D
= 40A
=25V, f = 1 MHz,
= 0
Q g
Q gs
Q gd
Total gate charge
Gate-source charge
Gate-drain charge
V
V
DD
GS
1.
Pulsed: pulse duration=300µs, duty cycle 1.5%
= 50V, I
D
=10V
= 80A
Min.
Typ.
Max.
Unit
78 S
4270
470
140
104
20
32 pF pF pF nC nC nC
4/15
STB60NF10 - STB60NF10 -1 - STP60NF10 Electrical characteristics
Table 5.
Symbol t d(on) t r t d(off) t f
Switching times
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Test conditions
V
DD
= 50V, I
D
= 40A,
R
G
=4.7
Ω, V
GS
=10V
Figure 13 on page 8
Min.
Typ.
Max.
Unit
17
56
82
23 ns ns ns ns
Table 6.
Symbol
Source drain diode
Parameter Test conditions
I
SD
I
SDM
(1)
V
SD
(2)
Source-drain current
Source-drain current (pulsed)
I t
Q rr rr
RRM
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
SD
= 80A, V
GS
= 0
I
SD
= 80A, di/dt = 100A/µs,
V
DD
= 25V, T
J
= 150°C
Figure 15 on page 8
1.
Pulse width limited by safe operating area
2.
Pulsed: pulse duration=300µs, duty cycle 1.5%
Min Typ.
Max Unit
80
320
A
A
1.3
92
340
7.4
V ns nC
A
5/15
Electrical characteristics
Figure 1.
Safe operating area
STB60NF10 - STB60NF10 -1 - STP60NF10
Figure 2.
Thermal impedance
Figure 3.
Output characterisics Figure 4.
Transfer characteristics
Figure 5.
Transconductance Figure 6.
Static drain-source on resistance
6/15
STB60NF10 - STB60NF10 -1 - STP60NF10 Electrical characteristics
Figure 7.
Gate charge vs gate-source voltage Figure 8.
Capacitance variations
Figure 9.
Normalized gate threshold voltage vs temperature
Figure 10. Normalized on resistance vs temperature
Figure 11. Source-drain diode forward characteristics
Figure 12. Normalized B
VDSS
vs temperature
7/15
Test circuit
3 Test circuit
Figure 13. Switching times test circuit for resistive load
STB60NF10 - STB60NF10 -1 - STP60NF10
Figure 14. Gate charge test circuit
Figure 15. Test circuit for inductive load switching and diode recovery times
Figure 16. Unclamped Inductive load test circuit
Figure 17. Unclamped inductive waveform Figure 18.
Switching time waveform
8/15
STB60NF10 - STB60NF10 -1 - STP60NF10
4 Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
9/15
Package mechanical data STB60NF10 - STB60NF10 -1 - STP60NF10
DIM.
L
L1
L20
L30
øP
Q e1
F
H1
J1
A b b1 c
D
E e
MIN.
4.40
0.61
1.15
0.49
15.25
10
2.40
4.95
1.23
6.20
2.40
13
3.50
3.75
2.65
TO-220 MECHANICAL DATA
mm.
TYP MAX.
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
MIN.
0.173
0.024
0.045
0.019
0.60
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
16.40
28.90
3.85
2.95
0.147
0.104
inch
TYP.
0.645
1.137
MAX.
0.181
0.034
0.066
0.027
0.620
0.409
0.106
0.202
0.052
0.256
0.107
0.551
0.154
0.151
0.116
10/15
STB60NF10 - STB60NF10 -1 - STP60NF10 Package mechanical data
DIM.
D e c c2
A
A1 b b1 e1
E
L
L1
L2
MIN.
4.40
2.40
0.61
1.14
0.49
1.23
8.95
2.40
4.95
10
13
3.50
1.27
TO-262 (I
2
PAK) MECHANICAL DATA mm.
TYP inch
TYP.
MAX.
4.60
2.72
0.88
1.70
0.70
1.32
9.35
2.70
5.15
10.40
14
3.93
1.40
MIN.
0.173
0.094
0.024
0.044
0.019
0.048
0.352
0.094
0.194
0.393
0.511
0.137
0.050
MAX.
0.181
0.107
0.034
0.066
0.027
0.052
0.368
0.106
0.202
0.410
0.551
0.154
0.055
11/15
Package mechanical data STB60NF10 - STB60NF10 -1 - STP60NF10
DIM.
L
L2
L3
M
D1
E
E1
G
R
V2
B2
C
C2
D
A
A1
A2
B
10
4.88
15
1.27
1.4
2.4
0º
0.7
1.14
0.45
1.23
8.95
MIN.
4.4
2.49
0.03
D
2
PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
TYP
0.93
1.7
0.6
1.36
9.35
MAX.
4.6
2.69
0.23
MIN.
0.173
0.098
0.001
0.027
0.044
0.017
0.048
0.352
8
10.4
0.393
8.5
5.28
15.85
1.4
1.75
3.2
0.192
0.590
0.050
0.055
0.094
0.4
4º inch
TYP.
0.315
0.334
0.015
0.208
0.625
0.055
0.068
0.126
MAX.
0.181
0.106
0.009
0.036
0.067
0.023
0.053
0.368
1
12/15
STB60NF10 - STB60NF10 -1 - STP60NF10
5 Packaging mechanical data
D
2
PAK FOOTPRINT
Packaging mechanical data
TAPE MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
A0 10.5
10.7
0.413 0.421
B0 15.7
15.9
0.618 0.626
D 1.5
1.6
0.059 0.063
D1 1.59
1.61
0.062 0.063
P2
R
T
W
E
F
1.65
1.85
0.065 0.073
11.4
11.6
0.449 0.456
K0 4.8
5.0
0.189 0.197
P0 3.9
4.1
0.153 0.161
P1 11.9
12.1
0.468 0.476
1.9
50
2.1
0.075 0.082
1.574
0.25
0.35 0.0098 0.0137
23.7
24.3
0.933 0.956
* on sales type
TAPE AND REEL SHIPMENT
A
B
N
T
C
D
G
REEL MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
330 12.992
1.5
0.059
12.8
13.2
0.504
0.520
20.2
0795
24.4
26.4
0.960
1.039
100 3.937
30.4
1.197
BASE QTY
1000
BULK QTY
1000
13/15
Revision history STB60NF10 - STB60NF10 -1 - STP60NF10
Table 7.
Date
Revision history
Revision
30-May-2005
30-Nov-2005
28-Jul-2006
18-Sep-2006
1
2
3
4
Changes
First release
Added package D²PAK
New template, SOA updated
Added I²PAK
14/15
STB60NF10 - STB60NF10 -1 - STP60NF10
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
15/15
