STMicroelectronics STD5N62K3 Datasheet

STD5N62K3, STF5N62K3

STP5N62K3, STU5N62K3

Datasheet

N-channel 620 V, 1.28 Ω typ., 4.2 A MDmesh™ K3 Power MOSFETs in

DPAK, TO-220FP, TO-220 and IPAK packages

TAB

1

DPAK

2

3

TO-220FP

1

2

3

TAB

TAB

TO-220

1

2

3

D(2, TAB)

IPAK

1

2

3

G(1)

S(3)

AM01475V1

Features

Order code V

DS

R

DS(on) max.

STD5N62K3

STF5N62K3

STP5N62K3

620 V 1.6 Ω

STU5N62K3

• 100% avalanche tested

• Extremely high dv/dt capability

• Very low intrinsic capacitance

• Improved diode reverse recovery characteristics

• Zener-protected

Applications

• Switching applications

I

D

4.2 A

Package

DPAK

TO-220FP

TO-220

IPAK

Description

These MDmesh™ K3 Power MOSFETs are the result of improvements applied to

STMicroelectronics’ MDmesh™ technology, combined with a new optimized vertical structure. These devices boast an extremely low on-resistance, superior dynamic performance and high avalanche capability, rendering them suitable for the most demanding applications.

Product status link

STD5N62K3

STF5N62K3

STP5N62K3

STU5N62K3

DS6792 - Rev 3 - September 2018

For further information contact your local STMicroelectronics sales office.

www.st.com

1

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

Electrical ratings

Electrical ratings

Symbol

Table 1. Absolute maximum ratings

Parameter

V

DS

V

GS

I

D

I

D

I

DM

(2)

P

TOT dv/dt

(3)

di/dt

(3)

Drain-source voltage

Gate-source voltage

Drain current (continuous) at T

C

Drain current (continuous) at T

C

Drain current (pulsed)

Total dissipation at T

C

= 25 °C

= 25 °C

= 100 °C

Peak diode recovery voltage slope

Diode reverse recovery current slope

V

ISO

Insulation withstand voltage (RMS) from all three leads to external heat sink

(t = 1 s; T

C

= 25 °C)

Operating junction temperature range T j

T stg

Storage temperature range

1. Limited by maximum junction temperature.

2. Pulse width limited by safe operating area.

3. I

SD

≤ 4.2 A, V

DSpeak

≤ V

(BR)SS

, V

DD

= 80% V

(BR)DSS

.

DPAK, TO-220,

IPAK

Value

620

±30

4.2

3

16.8

70

12

400

-55 to 150

TO-220FP

4.2 (1)

3 (1)

16.8 (1)

25

2.5

Symbol Parameter

R thj-case

R thj-amb

R thj-pcb

(1)

Thermal resistance junction-case

Thermal resistance junction-ambient

Thermal resistance junction-pcb

1. When mounted on 1inch² FR-4 board, 2 oz Cu.

Table 2. Thermal data

DPAK TO-220

1.79

62.5

Value

IPAK

100

50

°C

Unit

TO-220FP

5

62.5

°C/W

°C/W

°C/W

Unit

A

A

V

V

A

W

V/ns

A/ns kV

Table 3. Avalanche characteristics

Symbol

I

AR

(1)

E

AS

(2)

Parameter

Avalanche current, repetitive or not-repetitive

Single pulse avalanche energy

1. Pulse width limited by T j

max.

2. Starting T j

= 25 °C, I

D

= I

AR

, V

DD

= 50 V.

Value

4.2

120

Unit

A mJ

DS6792 - Rev 3 page 2/27

2

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

Electrical characteristics

Electrical characteristics

(T

CASE

= 25 °C unless otherwise specified)

Table 4. On/off states

Symbol

V

(BR)DSS

Parameter

Drain-source breakdown voltage

I

D

= 1 mA, V

Test conditions

GS

= 0 V

I

DSS

Zero gate voltage drain current

V

GS

= 0 V, V

DS

= 620 V

V

GS

= 0 V, V

DS

= 620 V, T

C

= 125 °C

(1)

V

R

I

GSS

GS(th)

DS(on)

Gate body leakage current

Gate threshold voltage

Static drain-source onresistance

V

V

V

DS

DS

GS

= 0 V, V

GS

= V

GS

, I

D

= 10 V, I

1. Defined by design, not subject to production test.

D

= ±20 V

= 50 µA

= 2.1 A

Min.

620

3

Typ.

Max.

3.75

1.28

1

50

±10

4.5

1.6

Unit

V

µA

µA

µA

V

Ω

Table 5. Dynamic

Symbol

C iss

C oss

C rss

C oss eq.

R

G

Q g

Q gs

Q gd

(1)

Parameter

Input capacitance

Total gate charge

Gate-source charge

Gate-drain charge

V

DD

(see behavior

)

Test conditions

Output capacitance

V

DS

= 50 V, f = 1 MHz, V

GS

= 0 V

Reverse transfer capacitance

Equivalent output capacitance

V

DS

= 0 to 496 V, V

GS

Intrinsic gate resistance f = 1 MHz open drain

= 0 V

= 496 V, I

D

= 4.2 A, V

GS

= 0 to 10 V

Figure 19. Test circuit for gate charge

Min.

-

-

-

-

Typ.

680

50

8

16.6

4

26

4

16

Max.

-

-

-

-

Unit pF pF

Ω nC

1. C oss eq.

is defined as a constant equivalent capacitance giving the same charging time as C oss

when V to 80% V

DSS

DS

increases from 0

Symbol t d(on) t r t d(off) t f

Parameter

Turn-on delay time

Rise time

Turn-off delay time

Fall time

Table 6. Switching times

Test conditions

V

DD

= 310 V, I

D

= 4.2 A,

R

G

= 4.7 Ω, V

GS

= 10 V

(see Figure 18. Test circuit for resistive load switching times and Figure 23. Switching time waveform

)

Min.

-

Typ.

12

8

40

21

Max.

-

Unit ns

DS6792 - Rev 3 page 3/27

DS6792 - Rev 3

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

Electrical characteristics

Table 7. Source-drain diode

Symbol

I

I

SD

SDM

(1)

Parameter

Source-drain current

Source-drain current

(pulsed)

Forward on voltage

Test conditions

V

SD

I

I t

Q rr rr

(2)

RRM t

Q rr rr

RRM

Reverse recovery time

Reverse recovery charge

Reverse recovery current

Reverse recovery time

Reverse recovery charge

Reverse recovery current

I

SD

= 4.2 A, V

GS

= 0 V

I

SD

= 4.2 A, di/dt = 100 A/µs

V

DD

= 60 V (see

Figure 20. Test circuit for inductive load switching and diode recovery times

)

I

SD

= 4.2 A, di/dt = 100 A/µs

V

DD

= 60 V, T j

= 150 °C (see

Figure 20. Test circuit for inductive load switching and diode recovery times

)

1. Pulse width limited by safe operating area.

2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%.

Min.

-

-

-

-

290

1.9

13

320

2.2

14

Typ.

Max.

4.2

16.8

1.5

Unit

A

A ns

μC

A

V ns

μC

Symbol

V

(BR)GSO

Parameter

Gate-source breakdown voltage

Table 8. Gate-source Zener diode

Test conditions

I

GS

= ±1 mA, I

D

= 0 A

Min.

±30

Typ.

-

Max.

Unit

V

The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device.

The Zener voltage facilitates efficient and cost-effective device integrity protection, thus eliminating the need for additional external componentry.

page 4/27

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

Electrical characteristics (curves)

2.1

Electrical characteristics (curves)

Figure 1. Safe operating area for DPAK and IPAK

I

D

(A)

Tj=150°C

Tc=25°C

Single pulse

AM08240v1

101

10µs

DS(on)

in this area is

100µs

100

1ms

10ms

10-1

10-2

10-1 100 101 102

V

DS(V)

Figure 3. Safe operating area for TO-220FP

I

D

(A)

AM08241v1

Tj=150°C

Tc=25°C

Single pulse

101

10µs

100

10-1

DS(on)

Operation

Limited

in this area is

by max R

100µs

1ms

10ms

10-2

10-1 100 101 102

V

DS(V)

Figure 2. Thermal impedance for DPAK and IPAK

K

GC20460

10 0

10 -1

10 -2

10 -5 10 -4 10 -3 10 -2 10 -1 t p

(s)

Figure 4. Thermal impedance for TO-220FP

K GC20940

10 -1

10 -2

10 -3

10 -4 10 -3 10 -2 10 -1 10 0 t p

(s)

Figure 6. Thermal impedance for TO-220

Figure 5. Safe operating area for TO-220

AM08239v1

I

D

(A)

Tj=150°C

Tc=25°C

Single pulse

10 1

10 0

by max R

Operation in this area

Limited

is

DS(on)

10µs

100µs

1ms

10ms

10 -1

10 -2

10 -1 10 0 10 1 10 2

V

DS6792 - Rev 3 page 5/27

Figure 9. Normalized V

(BR)DSS

vs temperature

V

(BR) DSS

(norm)

AM08596v1

1.10

V

GS

= 0 V

I

D

= 1 mA

1.05

1.00

0.95

0.90

-75 -25 25 75 125 T

J

(°C)

Figure 11. Gate charge vs gate-source voltage

V

GS

(V)

12

V

DS

V

DD

=496V

I

D

=4.2A

AM08245v1

V

DS

(V)

500

10

400

8

300

6

200

4

2

100

0

0 5 10 15 20 25 30

0

Q g(nC)

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

Electrical characteristics (curves)

4

2

0

0

8

6

I

D

(A)

10

Figure 7. Output characterisics

V

GS

=10V

AM08243v1

7V

5 10 15 20

6V

25

5V

V

DS(V)

Figure 8. Transfer characteristics

I

D

(A)

7

6

5

4

3

2

1

0

0 2

V

DS

=15 V

4 6 8

AM08244v1

V

GS(V)

Figure 10. Static drain-source on-resistance

AM08246v1

R

DS(on)

(Ω)

1.38

1.36

V

GS

=10V

1.34

1.32

1.30

1.28

1.26

1.24

1.22

1.0

2.0

3.0

4.0

I

D

(A)

Figure 12. Capacitance variations

AM08247v1

C

(pF)

1000

Ciss

100

10

Coss

Crss

1

0.1

1 10 100 V DS (V)

DS6792 - Rev 3 page 6/27

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

Electrical characteristics (curves)

Figure 13. Normalized gate threshold voltage vs temperature

AM08249v1

V GS(th)

(norm)

1.10

I

D

=50 µA

1.00

0.90

0.80

0.70

-75 -25 25 75 125 T

J

(°C)

Figure 14. Normalized on-resistance vs temperature

R DS(on)

(norm)

2.5

2.0

1.5

1.0

0.5

0

-75 -25

V GS =10 V

AM08250v1

25 75 125 T J (°C)

Figure 15. Source-drain diode forward characteristics

AM08597v1

V SD

(V)

1.0

T J =-50°C

0.9

0.8

0.7

T

J

=25°C

0.6

T J =150°C

0.5

0.4

0 0.2

0.4

0.6 0.8

1.0

1.2 1.4 1.6 1.8

I SD (A)

Figure 16. Maximum avalanche energy vs temperature

AM08598v1

E AS (mJ)

130

120

110

100

90

80

70

60

50

40

30

20

10

0

0

I

D

=4.2 A

V DD =50 V

20 40 60 80 100 120 140 T

J

(°C)

Figure 17. Output capacitance stored energy

AM08248v1

E oss

(µJ)

4

3

2

1

0

0 100 200 300 400 500 V DS (V)

DS6792 - Rev 3 page 7/27

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

Test circuits

3

Test circuits

Figure 18. Test circuit for resistive load switching times

V

GS pulse width

V

D

R

G

R

L

+

2200

μF

3.3

μF

D.U.T.

V

DD

AM01468v1

Figure 20. Test circuit for inductive load switching and diode recovery times

Figure 19. Test circuit for gate charge behavior

12 V

V

GS pulse width

2200

μF

+

1 kΩ

I

G

= CONST

2.7 kΩ

47 kΩ

47 kΩ

100 nF

100 Ω

V

DD

1 kΩ

D.U.T.

V

G

AM01469v1

Figure 21. Unclamped inductive load test circuit

G

25 Ω

D

A

D.U.T.

S

B

+

_

R

G

A A fast diode

B

B

G

100 µH

D

D.U.T.

3.3

µF

S

+

1000

µF

V

DD

AM01470v1

Figure 22. Unclamped inductive waveform

V (BR)DSS

V D

I

DM

I D

V DD V DD

AM01472v1

V i pulse width

V

D

L

I

D

+

2200

µF

3.3

µF

V

DD

D.U.T.

AM01471v1

0

Figure 23. Switching time waveform t d(on) t on t r t d(off) t off t f

90% 90%

10%

V

GS

V

DS

90%

10%

0 10%

AM01473v1

DS6792 - Rev 3 page 8/27

4

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

Package information

Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com

. ECOPACK ® is an ST trademark.

DS6792 - Rev 3 page 9/27

4.1

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

DPAK (TO-252) type A package information

DPAK (TO-252) type A package information

Figure 24. DPAK (TO-252) type A package outline

DS6792 - Rev 3

0068772_A_25 page 10/27

DS6792 - Rev 3

Dim.

c2

D

D1

E

E1 e e1

A

A1

A2 b b4 c

L2

L4

R

V2

H

L

(L1)

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

DPAK (TO-252) type A package information

Table 9. DPAK (TO-252) type A mechanical data mm

Typ.

9.35

1.00

2.60

0.65

0.60

4.95

6.40

4.60

2.159

4.445

0.64

5.20

0.45

0.48

6.00

Min.

2.20

0.90

0.03

5.10

4.70

2.286

4.572

2.80

0.80

0.20

0°

10.10

1.50

3.00

0.95

1.00

5.25

6.60

4.80

2.413

4.699

0.90

5.40

0.60

0.60

6.20

Max.

2.40

1.10

0.23

8° page 11/27

4.2

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

DPAK (TO-252) type C2 package information

DPAK (TO-252) type C2 package information

Figure 25. DPAK (TO-252) type C2 package outline

DS6792 - Rev 3

0068772_C2_25 page 12/27

DS6792 - Rev 3

Dim.

L

L1

L2

L3

L4

L6

θ1

θ2

V2 c2

D

D1

E

E1 e

H

A

A1

A2 b b4 c

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

DPAK (TO-252) type C2 package information

Table 10. DPAK (TO-252) type C2 mechanical data

0.72

5.13

0.47

0.47

6.00

Min.

2.20

0.90

0.00

5.10

6.50

5.20

2.186

9.80

1.40

mm

Typ.

2.30

1.01

5.33

6.10

6.60

2.286

10.10

1.50

2.90 REF

0.90

0.60

5°

5°

0°

0.51 BSC

0.80

1.80 BSC

7°

7°

1.00

9°

9°

8°

0.85

5.46

0.60

0.60

6.20

Max.

2.38

1.10

0.10

5.60

6.70

5.50

2.386

10.40

1.70

1.25

page 13/27

4.3

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

DPAK (TO-252) type E package information

DPAK (TO-252) type E package information

Figure 26. DPAK (TO-252) type E package outline

DS6792 - Rev 3

0068772_type-E_rev.25

page 14/27

DS6792 - Rev 3

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

DPAK (TO-252) type E package information

Dim.

D

D1

E

E1 e e1

H

L

L1

L2

L4

A

A2 b b4 c c2

Table 11. DPAK (TO-252) type E mechanical data

Min.

2.18

mm

Typ.

5.97

5.21

6.35

4.32

0.65

4.95

0.46

0.46

2.286

4.572

9.94

1.50

0.89

2.74

Figure 27. DPAK (TO-252) recommended footprint (dimensions are in mm)

10.34

1.78

1.27

1.02

Max.

2.39

0.13

0.884

5.46

0.61

0.60

6.22

6.73

FP_0068772_25 page 15/27

4.4

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

DPAK (TO-252) packing information

DPAK (TO-252) packing information

Figure 28. DPAK (TO-252) tape outline

T

Top cover tape

10 pitches cumulative tolerance on tape +/- 0.2 mm

P0 D P2

F

E

W

B1

K0

For machine ref. only including draft and radii concentric around B0

B0

A0 P1

User direction of feed

D1

User direction of feed

R

Bending radius

AM08852v1

DS6792 - Rev 3 page 16/27

DS6792 - Rev 3

Dim.

D1

E

F

K0

P0

A0

B0

B1

D

P1

P2

R

T

W

A

D

B

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

DPAK (TO-252) packing information

Figure 29. DPAK (TO-252) reel outline

T

40mm min. access hole at slot location

C

N

G measured at hub

Full radius

Tape slot in core for tape start

2.5mm min.width

AM06038v1

2.55

3.9

7.9

1.9

40

0.25

15.7

1.5

1.5

1.65

7.4

Table 12. DPAK (TO-252) tape and reel mechanical data

Tape Reel mm

Dim.

Min.

6.8

10.4

Max.

7

10.6

12.1

1.6

C

D

A

B

G

N

T

Min.

1.5

12.8

20.2

16.4

50 1.85

7.6

2.75

4.1

8.1

2.1

0.35

16.3

Base qty.

Bulk qty.

mm

Max.

330

13.2

18.4

22.4

2500

2500 page 17/27

4.5

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

TO-220FP package information

TO-220FP package information

Figure 30. TO-220FP package outline

DS6792 - Rev 3

7012510_Rev_12_B page 18/27

DS6792 - Rev 3

Dim.

F2

G

G1

H

L2

L3

L4

L5

L6

L7

Dia

D

E

A

B

F

F1

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

TO-220FP package information

Table 13. TO-220FP package mechanical data mm

Typ.

Min.

4.4

2.5

2.5

0.45

0.75

1.15

1.15

4.95

2.4

10

16

28.6

9.8

2.9

15.9

9

3

Max.

4.6

2.7

2.75

0.7

1

1.70

1.70

5.2

2.7

10.4

30.6

10.6

3.6

16.4

9.3

3.2

page 19/27

4.6

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

TO-220 type A package information

TO-220 type A package information

Figure 31. TO-220 type A package outline

DS6792 - Rev 3

0015988_typeA_Rev_21 page 20/27

DS6792 - Rev 3

Dim.

E e e1

F

H1

J1

L b1 c

A b

D

D1

L1

L20

L30

øP

Q

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

TO-220 type A package information

Table 14. TO-220 type A package mechanical data mm

Typ.

Min.

4.40

0.61

1.14

0.48

15.25

1.27

10.00

2.40

4.95

1.23

6.20

2.40

13.00

3.50

16.40

28.90

3.75

2.65

3.85

2.95

10.40

2.70

5.15

1.32

6.60

2.72

14.00

3.93

Max.

4.60

0.88

1.55

0.70

15.75

page 21/27

4.7

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

IPAK (TO-251) type A package information

IPAK (TO-251) type A package information

Figure 32. IPAK (TO-251) type A package outline

DS6792 - Rev 3

0068771_IK_typeA_rev14 page 22/27

DS6792 - Rev 3

Dim.

D

E e c c2 e1

H

L

L1

L2

V1

A

A1 b b2 b4

B5

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

IPAK (TO-251) type A package information

Table 15. IPAK (TO-251) type A package mechanical data mm

Typ.

Min.

2.20

0.90

0.64

5.20

0.45

0.48

6.00

6.40

4.40

9.00

0.80

0.30

2.28

16.10

0.80

10°

0.60

0.60

6.20

6.60

4.60

Max.

2.40

1.10

0.90

0.95

5.40

9.40

1.20

1.00

page 23/27

5

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

Ordering information

Ordering information

Order code

STD5N62K3

STF5N62K3

STP5N62K3

STU5N62K3

Table 16. Order codes

Marking

5N62K3

Package

DPAK

TO-220FP

TO-220

IPAK

Packing

Tape and reel

Tube

DS6792 - Rev 3 page 24/27

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

Revision history

Date

09-Apr-2010

20-Oct-2010

24-Sep-2018

2

3

Table 17. Document revision history

Version

1

Changes

First release

– Added new package, mechanical data: IPAK;

– Added new package, mechanical data: D²PAK;

– Document status promoted from preliminary data to datasheet.

The part number STB5N62K3 has been moved to a separate datasheet.

Removed maturity status indication from cover page. The document status is production data.

Updated title, features and description on cover page.

Updated Section 1 Electrical ratings ,

Section 2 Electrical characteristics

and

Section 4 Package information

.

Minor text changes.

DS6792 - Rev 3 page 25/27

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

Contents

Contents

1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2.1

Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

4.1

DPAK (TO-252) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.2

DPAK (TO-252) type C2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4.3

DPAK (TO-252) type E package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

4.4

DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4.5

TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.6

TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.7

IPAK (TO-251) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

DS6792 - Rev 3 page 26/27

STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of

Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

© 2018 STMicroelectronics – All rights reserved

DS6792 - Rev 3 page 27/27