STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
4.5 A, 600 V very fast IGBT with Ultrafast diode
Datasheet - production data
Features
Minimal tail current
Low conduction and switching losses
Ultrafast soft recovery antiparallel diode
Applications
Motor drive
Description
These devices are based on a new advanced planar technology concept to yield an IGBT with more stable switching performance (E off
) versus temperature, as well as lower conduction losses.
Figure 1: Internal schematic diagram
Order code
STGB3HF60HD
STGD3HF60HDT4
STGF3HF60HD
STGP3HF60HD
Table 1: Device summary
Marking Package
GB3HF60HD
GD3HF60HD
GF3HF60HD
GP3HF60HD
September 2016 DocID17690 Rev 5
This is information on a product in full production.
D²PAK
DPAK
TO-220FP
TO-220
Packing
Tape and reel
Tape and reel
Tube
Tube
1/26 www.st.com
Contents STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Contents
1 Electrical ratings ............................................................................. 3
2 Electrical characteristics ................................................................ 4
2.1
Electrical characteristics (curves) ...................................................... 7
3 Test circuits ................................................................................... 10
4 Package information ..................................................................... 11
4.1
4.2
4.3
4.4
4.5
4.6
D²PAK (TO-263) package information ............................................ 11
D²PAK (TO-263) packing information .............................................. 14
DPAK (TO-252) type A package information................................... 16
DPAK (TO-252) packing information ............................................... 19
TO-220FP package information ...................................................... 21
TO-220 type A package information ................................................ 23
5 Revision history ............................................................................ 25
2/26 DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
1
Electrical ratings
Electrical ratings
Table 2: Absolute maximum ratings
Symbol Parameter
V
CES
Collector-emitter voltage (V
GE
= 0)
I
C
(1)
Continuous collector current at T
C
= 25 °C
I
C
(1)
Continuous collector current at T
C
= 100 °C
I
CL
(2)
Turn-off latching current
I
CP
(3)
Pulsed collector current
V
GE
I
F
Gate-emitter voltage
Diode RMS forward current at T
C
= 25 °C
I
FSM
Surge non repetitive forward current t p
= 10 ms sinusoidal
P
TOT
Total dissipation at T
C
= 25 °C
T
STG
Storage temperature range
T j
Operating junction temperature range
DPAK
Value
D 2 PAK
TO-220
TO-220FP
600
7.5
4.5
18
18
± 20
10
Unit
A
V
A
V
A
A
A
38
25
- 55 to 150
18
A
W
°C
Notes:
(1)
Calculated according to the iterative formula:
𝐼
𝐶
(𝑇
𝐶
) =
𝑇 𝑗(𝑚𝑎𝑥)
−𝑇
𝐶
𝑅 𝑡ℎ𝑗−𝑐
×𝑉
𝐶𝐸(𝑠𝑎𝑡)(𝑚𝑎𝑥)
(𝑇 𝑗(𝑚𝑎𝑥),
𝐼
𝐶
(𝑇
𝐶
))
(2)
V clamp
= 80 %, (V
CES
), T j
= 150 °C, R
G
= 10 Ω, V
GE
= 15 V.
(3)
Pulse width limited by maximum junction temperature range.
Table 3: Thermal data
Symbol Parameter
R thj-case
Thermal resistance junction-case IGBT
Thermal resistance junction-case diode
R thj-amb
Thermal resistance junction-ambient
DPAK
3.3
5
Value
D 2 PAK
TO-220
TO-220FP
6.9
8
100 62.5
Unit
°C/W
°C/W
°C/W
DocID17690 Rev 5 3/26
Electrical characteristics
2
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Electrical characteristics
(T j
=25 °C unless otherwise specified).
Symbol
Table 4: Static electrical characteristics
Parameter Test conditions Min. Typ. Max. Unit
V
(BR)CES
Collector-emitter breakdown voltage (V
GE
= 0)
I
C
= 1 mA 600 V
V
CE(sat)
Collector-emitter saturation voltage
V
GE(th)
Gate threshold voltage
I
CES
Collector cut-off current
(V
GE
= 0)
V
GE
= 15 V, I
C
= 0.5 A,
T j
= 125 °C
V
GE
= 15 V, I
C
= 1.5 A
V
GE
= 15 V, I
C
= 1.5 A,
T j
= 125 °C
V
CE
= V
GE
, I
C
= 250 µA
V
CE
= 600 V
V
CE
= 600 V,
T j
= 125 °C
1.4
2.45 2.95
3.75
1.85
5.75
250
1
V
V
µA mA
I
GES g fs
Gate-emitter leakage current
(V
CE
= 0)
Forward transconductance
V
GE
= ± 20 V
V
CE
= 15 V
,
I
C
= 1.5 A 1.5
± 100 nA
S
Symbol
Table 5: Dynamic electrical characteristics
Parameter Test conditions Min. Typ. Max. Unit
C ies
C oes
C res
Q g
Q ge
Q gc
Input capacitance
Output capacitance
Reverse transfer capacitance
Total gate charge
Gate-emitter charge
Gate-collector charge
V
CE
= 25 V, f = 1 MHz,
V
GE
= 0
V
CE
= 480 V,
I
C
= 1.5 A, V
GE
= 15 V
(see Figure 18: " Gate charge test circuit" )
-
-
-
-
-
-
152
14
3
12
2
6
-
-
-
-
-
- pF pF pF nC nC nC
4/26 DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Electrical characteristics
Table 6: Switching on/off (inductive load)
Symbol Parameter Test conditions Min. Typ. Max. Unit t d(on) t r
Turn-on delay time
Current rise time
(di/dt)on Turn-on current slope t d(on) t r
Turn-on delay time
Current rise time
(di/dt)on Turn-on current slope tr(Voff) Off voltage rise time td(off) Turn-off delay time t f
Current fall time tr(Voff) Off voltage rise time td(off) Turn-off delay time t f
Current fall time
V
CC
= 400 V, I
C
= 1.5 A
R
G
= 100 Ω, V
GE
= 15 V
(see Figure 17: " Test circuit for inductive load switching"Figure 19:
" Switching waveform" )
V
CC
= 400 V, I
C
= 1.5 A
R
G
= 100 Ω, V
GE
= 15 V,
T j
= 125 °C
(see Figure 17: " Test circuit for inductive load switching"Figure 19: " Switching waveform" )
V
CC
= 400 V, I
C
= 1.5 A,
R
GE
= 100 Ω, V
GE
= 15 V
(see Figure 17: " Test circuit for inductive load switching"Figure 19:
" Switching waveform" )
V
CC
= 400 V, I
C
= 1.5 A,
R
GE
= 100 Ω, V
GE
= 15 V,
T j
= 125 °C
(see Figure 17: " Test circuit for inductive load switching"Figure 19: " Switching waveform" )
-
-
-
-
-
-
-
-
-
-
-
-
11
4
285
10
5
265
26
60
50
64
69
71
-
-
-
-
-
-
-
-
-
-
-
- ns ns
A/µs ns ns
A/µs ns ns ns ns ns ns
Symbol
E
on
(1)
E
off
(2)
E
E
E
E
E ts ts
on off
ts
(1)
(2)
Parameter
Table 7: Switching energy (inductive load)
Test conditions Min. Typ. Max. Unit
Turn-on switching energy
Turn-off switching energy
Total switching energy
Turn-on switching energy
Turn-off switching energy
Total switching energy
V
CC
= 400 V, I
(see
C
= 1.5 A
R
G
= 100 Ω, V
GE
= 15 V
Figure 17: " Test circuit for inductive load switching"Figure 19:
" Switching waveform" )
V
R
CC
G
= 400 V, I
= 100 Ω, V
C
= 1.5 A
GE
= 15 V,
T j
= 125 °C
(see Figure 17: " Test circuit for inductive load switching"Figure 19: " Switching waveform" )
-
-
-
-
-
-
19
12
31
38
35
73
-
-
-
-
-
-
µJ
µJ
µJ
µJ
µJ
µJ
Notes:
(1)
Eon is the turn-on energy when a typical diode is used in the test circuit in Figure 17: " Test circuit for inductive load switching" . If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as
external diode. IGBTs and diode are at the same temperature (25 °C and 125 °C).
(2)
Turn-off energy include also the tail of the collector current.
DocID17690 Rev 5 5/26
Electrical characteristics
Symbol
V
F t rr
Q rr
I rrm t rr
Q rr
I rrm
Parameter
Forward on-voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Reverse recovery time
Reverse recovery charge
Reverse recovery current
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Table 8: Collector-emitter diode
Test conditions Min. Typ. Max. Unit
I
F
= 1.5 A
I
F
= 1.5 A, T j
= 125 °C
I
F
= 1.5 A, V
R
= 40 V, di/dt = 100 A/µs
(see Figure 20: " Diode reverse recovery waveform" )
I
F
= 1.5 A,V
R
= 40 V,
T j
= 125 °C, di/dt = 100 A/µs
(see Figure 20: " Diode reverse recovery waveform" )
-
-
-
-
-
-
-
-
1.4 1.8
1.15
85
124
3
114
194
3.5
V ns nC
A ns nC
A
6/26 DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
2.1 Electrical characteristics (curves)
Figure 2: Output characteristics
Electrical characteristics
Figure 3: Output characteristic details
Figure 4: Transfer characteristics
Figure 5: Collector-emitter on voltage vs collector current
Figure 6: Collector-emitter on voltage vs temperature
Figure 7: Breakdown voltage vs temperature
7/26 DocID17690 Rev 5
Electrical characteristics
Figure 8: Gate threshold voltage vs temperature
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Figure 9: Gate charge vs gate-emitter voltage
Figure 10: Capacitance variations Figure 11: Switching energy vs collector current
Figure 12: Switching energy vs gate resistence Figure 13: Switching energy vs temperature
8/26 DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Figure 14: Turn-off SOA
Electrical characteristics
Figure 15: Diode forward on voltage
10
10
-2
-5
Figure 16: Thermal impedance
10
-4
10
-3
10
-2
10
-1 t p (s)
10
-1 c
10
0
K
CG34360
DocID17690 Rev 5 9/26
Test circuits
3 Test circuits
Figure 17: Test circuit for inductive load switching
G
C
A A
E
B
L=100 µH
B
G
C
E
D.U.T
+ R
G
-
3.3
µF
1000
µF
V
CC
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Figure 18: Gate charge test circuit
AM01504v 1
Figure 19: Switching waveform
Figure 20: Diode reverse recovery waveform
10/26 DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
4
4.1
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at:
www.st.com
.
ECOPACK ® is an ST trademark.
D²PAK (TO-263) package information
Figure 21: D²PAK (TO-263) type A package outline
DocID17690 Rev 5
0079457_A_rev22
11/26
Package information
Dim.
D1
D2
E
E1
E2 e e1
H
A
A1 b b2 c c2
D
J1
L
L1
L2
R
V2
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Table 9: D²PAK (TO-263) type A package mechanical data mm
Typ. Min.
7.50
1.10
10
8.50
6.85
4.40
0.03
0.70
1.14
0.45
1.23
8.95
7.75
1.30
8.70
7.05
2.54
Max.
4.60
0.23
0.93
1.70
0.60
1.36
9.35
8.00
1.50
10.40
8.90
7.25
4.88
15
2.49
2.29
1.27
1.30
0.4
5.28
15.85
2.69
2.79
1.40
1.75
0° 8°
12/26 DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Package information
Figure 22: D²PAK (TO-263) recommended footprint (dimensions are in mm)
DocID17690 Rev 5 13/26
Package information
4.2
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
D²PAK (TO-263) packing information
Figure 23: Tape outline
14/26 DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Figure 24: Reel outline
Package information
Dim.
P1
P2
R
T
W
E
F
K0
P0
A0
B0
D
D1
Table 10: D²PAK tape and reel mechanical data
Tape Reel mm
Dim.
Min. Max. Min.
10.5
15.7
1.5
1.59
1.65
11.4
4.8
3.9
11.9
1.9
50
0.25
23.7
10.7
15.9
1.6
1.61
1.85
11.6
5.0
4.1
12.1
2.1
0.35
24.3
A
B
C
D
1.5
12.8
20.2
G
N
T
24.4
100
Base quantity
Bulk quantity mm
Max.
330
1000
1000
13.2
26.4
30.4
DocID17690 Rev 5 15/26
Package information
4.3
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
DPAK (TO-252) type A package information
Figure 25: DPAK (TO-252) type A package outline
0068772_A_21
16/26 DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Package information
Table 11: DPAK (TO-252) type A mechanical data mm
Dim.
Min. Typ. Max.
D
D1
E
E1 e e1
H
L
A
A1
A2 b b4 c c2
(L1)
L2
L4
R
V2
6.00
4.95
6.40
4.60
2.16
4.40
9.35
1.00
2.20
0.90
0.03
0.64
5.20
0.45
0.48
2.60
0.65
0.60
0°
5.10
4.70
2.28
2.80
0.80
0.20
6.20
5.25
6.60
4.80
2.40
4.60
10.10
1.50
2.40
1.10
0.23
0.90
5.40
0.60
0.60
3.00
0.95
1.00
8°
DocID17690 Rev 5 17/26
Package information STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Figure 26: DPAK (TO-252) recommended footprint (dimensions are in mm)
18/26 DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
4.4 DPAK (TO-252) packing information
Figure 27: DPAK (TO-252) tape outline
Package information
DocID17690 Rev 5 19/26
Package information STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Figure 28: DPAK (TO-252) reel outline
20/26
Dim.
P0
P1
P2
R
T
D1
E
F
K0
W
A0
B0
B1
D
3.9
7.9
1.9
40
0.25
15.7
1.5
1.5
1.65
7.4
2.55
Table 12: DPAK (TO-252) tape and reel mechanical data
Tape Reel mm
Dim.
Min. Max. Min.
6.8
10.4
7
10.6
12.1
1.6
1.85
7.6
2.75
4.1
8.1
2.1
A
B
C
D
G
N
T
Base qty.
Bulk qty.
1.5
12.8
20.2
16.4
50
0.35
16.3 mm
Max.
330
13.2
18.4
22.4
2500
2500
DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
4.5 TO-220FP package information
Figure 29: TO-220FP package outline
Package information
DocID17690 Rev 5 21/26
Package information
Dim.
G
G1
H
L2
L3
L4
L5
L6
L7
Dia
E
F
F1
F2
A
B
D
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Table 13: TO-220FP package mechanical data mm
Typ. Min.
4.4
2.5
2.5
0.45
0.75
1.15
1.15
4.95
2.4
10
16
Max.
4.6
2.7
2.75
0.7
1
1.70
1.70
5.2
2.7
10.4
28.6
9.8
2.9
15.9
9
3
30.6
10.6
3.6
16.4
9.3
3.2
22/26 DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
4.6 TO-220 type A package information
Figure 30: TO-220 type A package outline
Package information
DocID17690 Rev 5 23/26
Package information
Dim. e e1
F
H1
J1
L
L1
L20
A b b1 c
D
D1
E
L30
øP
Q
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
Table 14: TO-220 type A mechanical data mm
Typ. Min.
4.40
0.61
1.14
0.48
15.25
1.27
Max.
4.60
0.88
1.55
0.70
15.75
10.00
2.40
4.95
1.23
6.20
2.40
13.00
3.50
3.75
2.65
16.40
28.90
10.40
2.70
5.15
1.32
6.60
2.72
14.00
3.93
3.85
2.95
24/26 DocID17690 Rev 5
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
5
Revision history
Revision history
Date Revision
Table 15: Document revision history
Changes
29-Jun-2010
09-Sep-2010
22-Dec-2010
24-Sep-2013
19-Sep-2016
1
2
3
4
5
First release.
Some values changed in Table 2 .
Document status promoted from preliminary data to datasheet.
Added device in TO-220.
Updated Table 1: Device summary , Table 3: Thermal data and Section
4: Package mechanical data accordingly.
Added the order codes STGB3HF60HD and STGF3HF60HD.
Added TO-220FP and D²PAK packages.
Updated Table 1: "Device summary" ,
Section 1: "Electrical ratings" ,
Section 4: "Package information" .
Minor text changes.
DocID17690 Rev 5 25/26
STGB3HF60HD, STGD3HF60HDT4,
STGF3HF60HD, STGP3HF60HD
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2016 STMicroelectronics – All rights reserved
26/26 DocID17690 Rev 5
