STMicroelectronics STD10NM60N Datasheet

STD10NM60N, STF10NM60N,
STP10NM60N, STU10NM60N
N-channel 600 V, 0.53 Ω typ., 10 A MDmesh™ II Power MOSFET
in DPAK, TO-220FP, TO-220 and IPAK packages
Datasheet - production data
Features
7$%
Order code
DPAK
VDS @TJ
max.
STP10NM60N
7$%
ID
PTOT
STD10NM60N
STF10NM60N
TO-220FP
RDS(on)
max.
70 W
650 V
0.55 Ω
25 W
10 A
70 W
STU10NM60N
7$%
• 100% avalanche tested
IPAK
TO-220
• Low input capacitance and gate charge
• Low gate input resistance
Figure 1. Internal schematic diagram
Applications
• Switching applications
' 7$%
Description
These devices are N-channel Power MOSFETs
developed using the second generation of
MDmesh™ technology. This revolutionary Power
MOSFET associates a vertical structure to the
company’s strip layout to yield one of the world’s
lowest on-resistance and gate charge. It is
therefore suitable for the most demanding high
efficiency converters.
*
6
$0Y
Table 1. Device summary
Order code
Marking
Package
Packing
STD10NM60N
10NM60N
DPAK
Tape and reel
STF10NM60N
10NM60N
TO-220FP
Tube
STP10NM60N
10NM60N
TO-220
Tube
STU10NM60N
10NM60N
IPAK
Tube
December 2015
This is information on a product in full production.
DocID028726 Rev 1
1/28
www.st.com
Contents
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
........................... 6
3
Test circuits
.............................................. 9
4
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.1
STD10NM60N, DPAK (TO-252) package information . . . . . . . . . . . . . . . 10
4.2
STF10NM60N, TO-220FP package information . . . . . . . . . . . . . . . . . . . 17
4.3
STP10NM60N, TO-220 package information . . . . . . . . . . . . . . . . . . . . . . 19
4.4
STU10NM60N, IPAK (TO-251) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5
Packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2/28
DocID028726 Rev 1
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
1
Electrical ratings
Electrical ratings
Table 2. Absolute maximum ratings
Value
Symbol
Parameter
Unit
TO-220 TO-220FP IPAK DPAK
VGS
Gate- source voltage
± 25
ID
Drain current (continuous) at TC = 25 °C
10
(1)
ID
Drain current (continuous) at TC = 100 °C
5
IDM(2)
Drain current (pulsed)
32
PTOT
Total dissipation at TC = 25 °C
70
dv/dt(3)
VISO
10
5 (1)
32
(1)
25
Peak diode recovery voltage slope
Operating junction temperature
Tstg
Storage temperature
10
A
5
A
32
A
70
W
15
Insulation withstand voltage (RMS) from all
three leads to external heat sink
(t =1 s; TC = 25 °C)
TJ
V
V/ns
2500
V
- 55 to 150
°C
1. Limited by maximum junction temperature.
2. Pulse width limited by safe operating area.
3. ISD ≤ 10 A, di/dt ≤ 400 A/µs, VDS peak ≤ V(BR)DSS, VDD = 80% V(BR)DSS.
Table 3. Thermal data
Value
Symbol
Parameter
Unit
TO-220 TO-220FP IPAK DPAK
Rthj-case
Thermal resistance junction-case max.
Rthj-amb
Thermal resistance junction-ambient max.
Rthj-pcb
Thermal resistance junction-pcb max.
1.79
5
1.79
62.50
°C/W
100
°C/W
50
°C/W
Table 4. Avalanche characteristics
Symbol
Parameter
Value
Unit
IAS
Avalanche current, repetitive or not-repetitive
(pulse width limited by Tj max.)
4
A
EAS
Single pulse avalanche energy
(starting TJ = 25 °C, ID = IAS, VDD = 50 V)
200
mJ
DocID028726 Rev 1
3/28
28
Electrical characteristics
2
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Electrical characteristics
(Tcase = 25 °C unless otherwise specified)
Table 5. On/off-states
Symbol
V(BR)DSS
Parameter
Test conditions
ID = 1 mA, VGS = 0
Drain-source
breakdown voltage
Min.
VDS = 600 V
Zero-gate voltage
drain current (VGS = 0) VDS = 600 V, TC = 125 °C
IGSS
Gate-body leakage
current (VDS = 0)
Gate threshold voltage VDS = VGS, ID = 250 µA
RDS(on)
Static drain-source onVGS = 10 V, ID = 4 A
resistance
Unit
V
650
1
µA
100
VGS = ± 25 V
VGS(th)
Max.
600
ID = 1 mA, VGS = 0,
TC = 150 °C
IDSS
Typ.
± 100
nA
3
4
V
0.53
0.55
Ω
Min.
Typ.
Max.
Unit
-
540
-
pF
-
44
-
pF
-
1.2
-
pF
2
Table 6. Dynamic
Symbol
Parameter
Test conditions
Ciss
Input capacitance
Coss
Output capacitance
Crss
Reverse transfer
capacitance
Coss eq(1)
Equivalent
capacitance time
related
VDS = 0 to 480 V, VGS = 0
-
110
-
pF
Rg
Gate input resistance
f=1 MHz open drain
-
6
-
Ω
Qg
Total gate charge
-
19
-
nC
Qgs
Gate-source charge
-
3
-
nC
Qgd
Gate-drain charge
VDD = 480 V, ID = 8 A,
VGS = 10 V
(see Figure 17)
-
10
-
nC
VDS = 50 V, f = 1 MHz,
VGS = 0
1. Coss eq. time related is defined as a constant equivalent capacitance giving the same charging time as Coss
when VDS increases from 0 to 80% VDSS.
4/28
DocID028726 Rev 1
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Electrical characteristics
Table 7. Switching times
Symbol
td(on)
tr
td(off)
tf
Parameter
Test conditions
Turn-on delay time
VDD = 300 V, ID = 4 A,
RG = 4.7 Ω, VGS = 10 V
(see Figure 16)
Rise time
Turn-off-delay time
Fall time
Min.
Typ.
Max. Unit
-
10
-
ns
-
12
-
ns
-
32
-
ns
-
15
-
ns
Table 8. Source-drain diode
Symbol
ISD
Parameter
Test conditions
Source-drain current
Min. Typ. Max. Unit
-
8
A
ISDM(1)
Source-drain current (pulsed)
VSD(2)
Forward on voltage
ISD = 8 A, VGS = 0
-
trr
Reverse recovery time
-
250
ns
Qrr
Reverse recovery charge
-
2.12
µC
IRRM
Reverse recovery current
ISD = 8 A, di/dt = 100 A/µs
VDD= 60 V
(see Figure 18)
17
A
ISD = 8 A, di/dt = 100 A/µs
VDD= 60 V TJ = 150 °C
(see Figure 18)
-
315
ns
2.6
µC
16.5
A
trr
Reverse recovery time
Qrr
Reverse recovery charge
IRRM
Reverse recovery current
32
1.3
V
1. Pulse width limited by safe operating area.
2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%.
DocID028726 Rev 1
5/28
28
Electrical characteristics
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Electrical characteristics (curves)
2.1
Figure 2. Safe operating area for TO-220
Figure 3. Thermal impedance for TO-220
$0Y
,'
$
—V
RQ
2
/L SHU
P DW
LWH LR
G QL
E\ Q
P WKL
D[ VD
5 UH
D
LV
—V
'
6
—V
PV
PV
7M ƒ&
7F ƒ&
6LQJOH
SXOVH
9'6 9
Figure 4. Safe operating area for TO-220FP
RQ
—V
'
6
2
S
/L HUD
P WL
LWH RQ
G LQ
E\ W
P KLV
D[ D
5 UHD
LV
,'
$
Figure 5. Thermal impedance for TO-220FP
$0Y
—V
PV
7M ƒ&
7F ƒ&
PV
6LQJOH
SXOVH
9'6 9
Figure 6. Safe operating area for DPAK, IPAK
Figure 7. Thermal impedance for DPAK, IPAK
$0Y
,'
$
—V
RQ
—V
'
6
2
/L SHU
P DW
LWH LR
G QL
E\ Q
P WKL
D[ VD
5 UH
D
LV
—V
PV
PV
7M ƒ&
7F ƒ&
6LQJOH
SXOVH
6/28
9'6 9
DocID028726 Rev 1
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Figure 8. Output characteristics
Figure 9. Transfer characteristics
$0Y
,'
$
Electrical characteristics
9*6 9
$0Y
,'
$
9'6 9
9
9
9
Figure 10. Normalized VDS vs. temperature
$0Y
9'6
QRUP
,' P$
9'6 9
9*6 9
Figure 11. Static drain-source on-resistance
$0Y
5'6 RQ
:
9*6 9
7- ƒ&
Figure 12. Gate charge vs. gate-source voltage
$0Y
9*6
9
9'' 9
,' $
,' $
Figure 13. Capacitance variations
$0Y
&
S)
9'6
&LVV
&RVV
&UVV
4J Q&
DocID028726 Rev 1
9'6 9
7/28
28
Electrical characteristics
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Figure 14. Normalized gate threshold voltage
vs. temperature
9*6 WK
QRUP
$0Y
,' —$
Figure 15. Normalized on-resistance vs.
temperature
$0Y
5'6 RQ
QRUP
,' $
9*6 9
8/28
7- ƒ&
DocID028726 Rev 1
7- ƒ&
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
3
Test circuits
Test circuits
Figure 16. Switching times test circuit for
resistive load
Figure 17. Gate charge test circuit
9''
9
Nȍ
Nȍ
Q)
P)
5/
P)
9*6
,* &2167
9''
:
9L 9 9*0$;
9'
5*
—)
'87
'87
9*
Nȍ
3:
Nȍ
Nȍ
3:
$0Y
Figure 18. Test circuit for inductive load
switching and diode recovery times
$
$
'87
)$67
',2'(
%
%
$0Y
Figure 19. Unclamped inductive load test circuit
/
$
'
*
6
9'
/ —+
—)
%
ȍ
—)
'
9''
—)
—)
9''
,'
*
5*
6
9L
'87
3Z
$0Y
$0Y
Figure 20. Unclamped inductive waveform
Figure 21. Switching time waveform
WRQ
9 %5 '66
WGRQ
9'
WRII
WU
WGRII
,'0
WI
,'
9''
9''
9'6
9*6
$0Y
DocID028726 Rev 1
$0Y
9/28
28
Package information
4
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
4.1
STD10NM60N, DPAK (TO-252) package information
Figure 22. DPAK (TO-252) type A package outline
B
10/28
DocID028726 Rev 1
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Package information
Table 9. DPAK (TO-252) type A mechanical data
mm
Dim.
Min.
Typ.
Max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
D1
4.95
E
6.40
E1
4.60
4.70
4.80
e
2.16
2.28
2.40
e1
4.40
4.60
H
9.35
10.10
L
1.00
1.50
(L1)
2.60
2.80
3.00
L2
0.65
0.80
0.95
L4
0.60
5.10
6.60
1.00
R
V2
5.25
0.20
0°
8°
DocID028726 Rev 1
11/28
28
Package information
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Figure 23. DPAK (TO-252) type C2 outline
W\SH&
12/28
DocID028726 Rev 1
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Package information
Table 10. DPAK (TO-252) type C2 package mechanical data
mm
Dim.
Min.
Typ.
Max.
A
2.20
2.30
2.38
A1
0.90
1.01
1.10
A2
0.00
0.10
b
0.72
0.85
b4
5.13
c
0.47
0.60
c2
0.47
0.60
D
6.00
D1
5.10
E
6.50
E1
5.20
e
2.186
2.286
2.386
H
9.80
10.10
10.40
L
1.40
1.50
1.70
5.33
6.10
6.60
6.70
5.50
2.90 REF
0.90
1.25
L3
L4
6.20
5.60
(L1)
L2
5.46
0.51 BSC
0.60
0.80
L6
1.00
1.80 BSC
Ɵ1
5°
7°
9°
Ɵ2
5°
7°
9°
V2
0°
8°
DocID028726 Rev 1
13/28
28
Package information
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Figure 24. DPAK (TO-252) type E package outline
BW\SH(
14/28
DocID028726 Rev 1
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Package information
Table 11. DPAK (TO-252) type E mechanical data
mm
Dim.
Min.
A
Typ.
2.18
Max.
2.39
A2
0.13
b
0.65
0.884
b4
4.95
5.46
c
0.46
0.61
c2
0.46
0.60
D
5.97
6.22
D1
5.21
E
6.35
E1
4.32
6.73
e
2.286
e1
4.572
H
9.94
10.34
L
1.50
1.78
L1
L2
2.74
0.89
1.27
L4
1.02
DocID028726 Rev 1
15/28
28
Package information
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Figure 25. DPAK (TO-252) type A, C2, E recommended footprint (a)
a. All dimensions are in millimeters
16/28
DocID028726 Rev 1
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
4.2
Package information
STF10NM60N, TO-220FP package information
Figure 26. TO-220FP package outline
B5HYB.B%
DocID028726 Rev 1
17/28
28
Package information
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Table 12. TO-220FP package mechanical data
mm
Dim.
Min.
Max.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.70
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
18/28
Typ.
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
DocID028726 Rev 1
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
4.3
Package information
STP10NM60N, TO-220 package information
Figure 27. TO-220 type A package outline
BW\SH$B5HYB7
DocID028726 Rev 1
19/28
28
Package information
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Table 13. TO-220 type A mechanical data
mm
Dim.
Min.
Typ.
A
4.40
4.60
b
0.61
0.88
b1
1.14
1.70
c
0.48
0.70
D
15.25
15.75
D1
20/28
Max.
1.27
E
10
10.40
e
2.40
2.70
e1
4.95
5.15
F
1.23
1.32
H1
6.20
6.60
J1
2.40
2.72
L
13
14
L1
3.50
3.93
L20
16.40
L30
28.90
øP
3.75
3.85
Q
2.65
2.95
DocID028726 Rev 1
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
4.4
Package information
STU10NM60N, IPAK (TO-251)
Figure 28. IPAK (TO-251) type A outline
B,.BW\SH$BUHY
DocID028726 Rev 1
21/28
28
Package information
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Table 14. IPAK (TO-251) type A mechanical data
mm
Dim.
Min.
Typ.
A
2.20
2.40
A1
0.90
1.10
b
0.64
0.90
b2
b4
0.95
5.20
B5
5.40
0.30
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
E
6.40
6.60
e
e1
2.28
4.40
H
22/28
Max.
4.60
16.10
L
9.00
9.40
L1
0.80
1.20
L2
0.80
V1
10°
DocID028726 Rev 1
1.00
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Package information
Figure 29. IPAK (TO-251) type C package outline
B,.BW\SH&BUHY
DocID028726 Rev 1
23/28
28
Package information
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Table 15. IPAK (TO-251) type C package mechanical data
mm
Dim.
Min.
Typ.
Max.
A
2.20
2.30
2.35
A1
0.90
1.00
1.10
b
0.66
0.79
b2
24/28
0.90
b4
5.23
c
0.46
0.59
c2
0.46
0.59
D
6.00
6.10
6.20
D1
5.20
5.37
5.55
E
6.50
6.60
6.70
E1
4.60
4.78
4.95
e
2.20
2.25
2.30
e1
4.40
4.50
4.60
H
16.18
16.48
16.78
L
9.00
9.30
9.60
L1
0.90
1.00
1.20
L2
0.90
1.08
1.25
Ɵ1
3°
5°
7°
Ɵ2
1°
3°
5°
DocID028726 Rev 1
5.33
5.43
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
5
Packing information
Packing information
Figure 30. Tape for DPAK (TO-252)
SLWFKHVFXPXODWLYH
WROHUDQFHRQWDSHPP
7
3
7RSFRYHU
WDSH
3
'
(
)
%
.
)RUPDFKLQHUHIRQO\
LQFOXGLQJGUDIWDQG
UDGLLFRQFHQWULFDURXQG%
:
%
$
3
'
8VHUGLUHFWLRQRIIHHG
5
%HQGLQJUDGLXV
8VHUGLUHFWLRQRIIHHG
$0Y
DocID028726 Rev 1
25/28
28
Packing information
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
Figure 31. Reel for DPAK (TO-252)
7
5((/',0(16,216
PPPLQ
$FFHVVKROH
$WVO RWORFDWLRQ
%
'
&
1
$
)XOOUDGLXV
*PHDVXUHGDWKXE
7DSHVORW
LQFRUHIRU
WDSHVWDUWPPPLQ
ZLGWK
$0Y
Table 16. DPAK (TO-252) tape and reel mechanical data
Tape
Reel
mm
mm
Dim.
Dim.
Min.
Max.
A0
6.8
7
A
B0
10.4
10.6
B
1.5
12.1
C
12.8
1.6
D
20.2
G
16.4
50
B1
26/28
Min.
Max.
330
13.2
D
1.5
D1
1.5
E
1.65
1.85
N
F
7.4
7.6
T
K0
2.55
2.75
P0
3.9
4.1
Base quantity
2500
P1
7.9
8.1
Bulk quantity
2500
P2
1.9
2.1
R
40
T
0.25
0.35
W
15.7
16.3
DocID028726 Rev 1
18.4
22.4
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
6
Revision history
Revision history
Table 17. Document revision history
Date
Revision
Changes
04-Dec-2015
1
First release. Part numbers previously included in the datasheet with
DocID15764.
DocID028726 Rev 1
27/28
28
STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
28/28
DocID028726 Rev 1
">