Samsung sch-a562 Mobile Phone User Manual

Add to My manuals
64 Pages

advertisement

Samsung sch-a562 Mobile Phone User Manual | Manualzz

* Some contents in this manual may differ from your phone depending upon the software of the phone or your service provider.

PORTABLE CELLULAR

TELEPHONE

SCH-A562

User’s Manual

ELECTRONICS

World Wide Web http://www.samsungmobile.com

Printed in Korea

Code No. : GH68-03571A

English. 06/2003. Rev.1.1

2

Table of Contents

IMPORTANT SAFETY PRECAUTIONS .........................................

7

UNPACKING .................................................................................

9

YOUR PHONE

Phone Layout ............................................................................... 10

Display ........................................................................................ 13

Backlight ..................................................................................... 15

Service Light ................................................................................ 15

GETTING STARTED

Using the Battery ......................................................................... 16

Switching the Phone On and Off ................................................... 21

Your Phone’s Modes ..................................................................... 22

CALL FUNCTIONS

Making a Call ............................................................................... 24

Redialing the Last Number ............................................................ 25

Making a Call from Phonebook ..................................................... 26

Speed Dialing ............................................................................... 30

Four-digit Dialing .......................................................................... 31

Pause Dialing ............................................................................... 32

Adjusting the Volume..................................................................... 35

Answering a Call ........................................................................... 36

Options During a Call .................................................................... 36

Quickly Switching to the Manner Mode .......................................... 38

Viewing Missed Calls ..................................................................... 38

Call Forwarding ............................................................................ 39

Call Waiting .................................................................................. 39

Three-Way Calling.......................................................................... 40

3

4

USING THE MENUS

Accessing Menu Modes................................................................... 41

Accessing a Menu Function by Scrolling ......................................... 42

Accessing a Menu Function by Using Its Shortcut ............................ 44

List of Menu Functions .................................................................. 45

MY PHONE

Personal Menu

( OK-1)

....................................................... 49

Animation ( OK-2) .............................................................. 52

Sliding Text

( OK-3)

............................................................ 53

External Clock ( OK-4) ......................................................... 53

Dialing Digits

( OK-5)

.......................................................... 54

Language ( OK-6) ................................................................ 54

Memory

( OK-7)

.................................................................. 54

PHONEBOOK

Outgoing

(MENU 1-1)

............................................................. 55

Incoming (MENU 1-2) ............................................................. 56

Find Number

(MENU 1-3)

....................................................... 56

Add Entry (MENU 1-4) ............................................................ 59

Name Ringer

(MENU 1-5)

....................................................... 60

Group Editing (MENU 1-6) ...................................................... 61

Erase All

(MENU 1-7)

............................................................. 63

My Phone Number (MENU 1-#) .............................................. 63

ORGANIZER

Calendar (MENU 2-1) ............................................................. 64

Memo Pad

(MENU 2-2)

.......................................................... 67

Alarm (MENU 2-3) ................................................................. 68

Weekday Alarm

(MENU 2-4)

................................................... 69

Calculator (MENU 2-5) ............................................................ 70

Unit Converter

(MENU 2-6)

..................................................... 71

World Time (MENU 2-7) .......................................................... 71

COMM. CENTER

Services Menu (MENU 3-1) ..................................................... 72

Messages

(MENU 3-2)

............................................................. 77

GAMES ......................................................................... 84

MUSIC BOX

Sound Effects (MENU 5-1) ....................................................... 86

Melodies (MENU 5-2) .............................................................. 86

My Melody (MENU 5-3) ........................................................... 87

SOUNDS

Ring Volume

(MENU 6-1)

........................................................ 88

Alert Type (MENU 6-2) ............................................................ 88

Message Alert

(MENU 6-3)

...................................................... 89

Connect Tone (MENU 6-4) ....................................................... 90

Disconnect Tone

(MENU 6-5)

..................................................... 90

Tone Length (MENU 6-6) .......................................................... 90

SETUP

Answer Mode (MENU 7-1) ...................................................... 91

LCD

(MENU 7-2)

..................................................................... 91

Modem (MENU 7-3) ................................................................ 92

Auto Hyphen

(MENU 7-4)

....................................................... 94

Lock Phone (MENU 7-5) ......................................................... 95

Time Manager

(MENU 7-6)

..................................................... 96

Reset (MENU 7) ................................................................ 98

Security

(MENU 7-0)

............................................................... 99

5

6

HEALTH AND SAFETY INFORMATION

Exposure to Radio Frequency (RF) Signals .................................. 102

For Body Operation .................................................................... 104

Precautions When Using Batteries ............................................... 105

Road Safety ............................................................................... 106

Operating Environment .............................................................. 109

Electronic Devices ....................................................................... 109

Potentially Explosive Atmospheres .............................................. 111

Emergency Calls ......................................................................... 112

Other Important Safety Information ........................................... 113

Care and Maintenance ............................................................... 114

Acknowledging Special Precautions and the FCC and Industry Canada Notice ....................................................... 116

GLOSSARY .................................................................. 118

INDEX......................................................................... 121

QUICK REFERENCE CARD.............................................. 125

Important Safety

Precautions

Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal.

Road Safety at All Times

Do not use a hand-held phone while driving; park the vehicle first.

Switching Off When Refueling

Do not use the phone at a refueling point (service station) or near fuels or chemicals.

Switching Off in Aircraft

Wireless phones can cause interference. Using them in aircraft is both illegal and dangerous.

Switching Off in Hospitals

Switch off your phone near medical equipment.

Follow any regulations or rules in force.

Interference

All wireless phones may be subject to interference, which could affect their performance.

Special Regulations

Meet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital for example).

7

I mp ta nt S af ty P re au ti on

8

Sensible Use

Use only in the normal position (held to the ear).

Avoid unnecessary contact with the antenna when the phone is switched on.

Emergency Call

Ensure the phone is switched on and in service.

Key in the emergency number for your present location, then press the key. If certain feature are in use, deactivate those features before you can make an emergency call. Give all the necessary information as accurately as possible. Do not cut off the call until given permission to do so.

Water Resistance

Your phone is not water-resistance. Keep it dry.

Accessories and Batteries

Use only Samsung-approved accessories and batteries.

Qualified Service

Only qualified service personnel may install or repair your phone.

For more detailed safety information, see “Health and Safety Information” on page 102.

Unpacking

Your package contains the following items:

Handset Battery

Handstrap

Wearable

Ear-microphone

Desktop Charger User’s Manual

In addition, you can obtain the following accessories for your phone from your local SAMSUNG dealer:

• Slim and standard Li-Ion batteries

• Wearable ear-microphone

• Travel charger

• Cigarette lighter charger

• Car cradle

• Hands-free car kit

• Data cable

• Holster

9

Your Phone

Phone Layout

The following illustrations show the main elements of your phone:

With the phone open

Earpiece

Folder

Display

Volume keys

During a call, adjust the voice volume.

In Standby Mode with the phone open, adjust the key tone volume.

In Standby Mode with the phone closed, backlight the front LCD when held down.

10

Microphone

Y ou r Ph on e

With the phone closed

Earphone Jack

Antenna

Service light

External LCD

Key(s) Functions

E nters Main Menu Mode.

In Menu Mode, selects a menu function or stores information that you have entered.

In Standby Mode, quickly access your voice mail box when pressed and held.

In Menu Mode, scrolls through the menu options.

In Standby Mode, the enters Personal

Menu Mode and the key enters the

Music Box menu. The key allows you to enter the Messages menu and the key to search for a number in your

Phonebook by a name.

In Standby Mode, quickly launches the web browser to allow you to use the Internet.

11

12

Y ou Ph on

Makes or answers a call.

In Standby Mode, recalls the last numbers you dialed or received, and dials the last number when held down.

Ends a call. Also switches the phone on and off when held down.

In Menu Mode, cancels your input and returns to Standby Mode.

Deletes characters from the display.

In Menu Mode, returns to the previous menu level.

Enters numbers, letters and some special characters.

Perform various functions.

I n Standby Mode, the key quickly enters or exits the manner mode when held down.

Y ou r Ph on e

Display

The display has two areas:

Icons

Text and graphic area

Icons

Signal strength : Shows the received signal strength. The greater the number of bars, the stronger the signal.

Service : Appears when a call is in progress.

No Service : Appears when you are outside a service area. When it displays, you cannot make or receive calls. Wait a little while for a better signal or move into an open area to regain service.

Alarm : Appears when you set an alarm to ring at a specified time.

13

Y ou Ph on

14

Icons

(continued...)

New Message : Appears when a new text message is received.

Vibration mode : Appears when you set the phone to vibrate at an incoming call via the Alert Type menu option ( MENU

6-2 ) or when the phone is in the manner mode.

Roaming: Appears when you are out of your home area and registered onto a different network; when traveling other countries, for example.

Battery status : Shows the level of your battery. The more bars you see, the more power you have left.

External LCD

Your phone has an external LCD on the folder. When the phone is closed, it indicates when you have an incoming call or message. It also alerts you at the specified time when you have set an alarm by flashing its backlight and showing the corresponding icon.

When you press and hold one of the volume keys on the left side of the phone with the phone closed, the backlight of the external display illuminates.

Y ou r Ph on e

Backlight

The display and keypad are illuminated by a backlight. When you press any key, the backlight illuminates. It turns off if no key is pressed within a given period of time, depending upon the Backlight

Time option set in the LCD menu option. Then the display dims and finally turns off. The backlight remains on at all times when the phone is connected to an optional hands-free car kit.

To specify the length of time the phone waits before the backlight turns off, set the Backlight Time menu option ( MENU 7-2-1 ); see page 91 for further information.

Service Light

The service light is on the top right-hand corner of the phone. It flashes to indicate an incoming call or message. Also, the service light flashes for a few seconds when you turn the phone on.

Service light

15

Getting Started

Using the Battery

Your phone is powered by a rechargeable Li-ion battery. It comes packaged with a partially-charged, rechargeable standard Li-ion battery, and must be fully charged the first time you use your phone; otherwise the battery could be damaged.

Installing the Battery

1. Place the battery so that the tabs on it match the slots at the bottom of the phone.

G et ti ng St te d

Removing the battery

1. If necessary, switch off the phone by holding down the key until the power-off animation displays.

2. Remove the battery. To do so:

➀ Pull and hold the catch above the battery on the back of the phone.

➁ Lift the battery and take it out of the phone.

16

2. Press the battery down until it snaps into place.

Make sure that the battery is correctly installed before switching on the power.

17

18

G et in S rt d

Charging the Battery

A desktop charger is provided with your phone. Use only approved batteries and chargers. Ask your local

Samsung dealer for further details.

Note: You must fully charge the battery before using your phone for the first time.

The phone can be used while the battery is charging, but this increases the time it takes to charge your battery. To get the quickest charge for any battery, turn the phone off.

To charge the battery using the desktop charger:

1. Plug the power cord of the desktop charger into a standard AC outlet. When the power is connected properly, the small lights, or LEDs on the charger, flicker briefly and then turn off.

G et ti ng St te d

2. Place the battery into the compartment of the charger. Select one of the following two options:

• Place the phone with the battery attached into the front compartment. The left LED on the charger glows red.

• Insert a battery alone, not attached to the phone, into the rear compartment. The right LED on the charger glows red.

LEDs

3. The color indication of the LEDs on the charger is as listed below:

• Red: the battery is charging.

• Green: the battery is fully charged.

• Yellow: the battery is not correctly plugged in or is operating at a too high or too low temperature.

4. When charging is completed (the LED changes to green), remove the battery or phone from the charger and unplug the power cord of the charger from the AC outlet.

19

20

G et in S rt d

Low Battery Indicator

When the battery charge level gets low, the battery sensor blinks an empty Battery Status icon ( ) at the top right corner of the display and sounds a warning tone.

When the battery level gets too low, the phone automatically turns off. When this happens, you lose whatever you are doing and your phone call cuts off.

Watch the Battery Status icon and make sure that your battery is adequately charged.

G et ti ng St te d

Switching the Phone On and Off

1. Open the folder.

2. Hold the key down for more than one second to switch the phone on.

3. If the phone asks for a PIN code, enter the PIN code supplied by the service provider. For further information about the PIN code, see page 99.

The service light on the top right-hand corner of the phone flashes and an alert sounds. When your phone locates services, you can see the following idle screens on both the main and the external display:

01/03

FRI

If the phone is out of service, the No Service icon

( ) appears on the display. In this case, you cannot place and receive calls. Try again later when service is available.

Note : You can change the display language via the

Language menu option in the My Phone menu; see page 54 for further information.

3. When you wish to switch the phone off, hold the key down for more than two seconds.

21

22

G et in S rt d

WARNING!

Do not switch the phone on when mobile phone use is prohibited or when it may cause interference or danger.

Note: As with any other radio-transmitting device, do not touch the antenna on the phone unnecessarily when the phone is switched on. Contact with the antenna affects the call quality and may cause the phone to operate at a higher power level than otherwise needed.

Your Phone’s Modes

Standby Mode

Standby is the most basic state of your phone. The phone goes into the standby mode after you turn it on or whenever you briefly press the key.

When your phone is in the standby mode, you will typically see the current date and time. If you enter a phone number, you can press the key to dial it, or press the key to save it in internal Phonebook.

Press the key at any time to return to Standby

Mode. Be careful; if you are on a call when you press the key, the call disconnects and the phone returns to Standby Mode. Press the CLR key several times or hold it down to return to Standby Mode without ending the call.

G et ti ng St te d

Talk Mode

You can place and answer calls only when your phone is turned on. During a call, the phone is in the talk mode. In this mode, pressing the MENU key gives you a list of options. See page 36 for details.

Power Save Mode

Your phone comes with a Power Save feature that automatically turns off the display when you don’t use the phone. While this feature is active, the phone’s battery charge is conserved.

The display switches off if no key is pressed within one minute after the backlight turns off. You can press any key to activate the display.

Lock Mode

When you lock your phone using the Lock Phone menu option ( MENU 7-5 ) in the Setup menu, you cannot use the phone. In the lock mode, you can receive messages and calls, but you cannot place an outgoing call until you unlock the phone. To unlock the phone temporarily, enter the password.

For details about locking and unlocking your phone, see page 95.

23

24

Call Functions

Making a Call

To make a call:

1. In Standby Mode, enter the area code and phone number.

While entering a phone number, press the MENU key to insert a hard pause. For more information about pause dialing, see page 32.

2. Press the key. The phone places the call to the entered phone number.

Note : You can press and hold the number key corresponding to the last digit of the phone number to begin dialing.

Correcting the Number

To clear the last digit displayed

Press the

CLR key.

the whole display CLR key for more than one second.

C al F nc on s

Ending a Call

When you want to end your call, press the key.

The call time, or the length of the call, displays with the dialed number. If the number is stored in your phonebook, the name displays. If there is no match, you can press the key to save the number to

Phonebook. For further information about saving a number, see page 26.

Or just close the folder to end a call.

Redialing the Last Number

To redial the last number you dialed or received, press and hold the key.

The phone stores the records of the last 60 calls made to or from your phone so that you can search for a number at any time. To recall any of these numbers:

1. If there are characters on the display, press the key to return to Standby Mode.

2. Press the key. The list of the last calls displays.

• (blue): dialed calls

• (red): missed calls

3. Press the or key to scan through the list until you find a name or number you want.

25

C al F nc on s

4. Press the key to dial the displayed number.

If you press the OK key, the phone displays details of the call, such as the caller’s name, if available, date and time when the call was made, and the length of the call time. Press the MENU and OK keys to save the number in your Phonebook. For more information about saving a number, see below.

Making a Call from Phonebook

You can store the phone numbers you called regularly in the phone’s memory, which is called

Phonebook. You then simply recall the number to dial. For further information about the Phonebook feature, refer to page 55.

26

Saving a Number with a Name in

Phonebook

1. Press the key after ending a call or entering the phone number you want to save by using the number keypad.

2. Select a label for the number by pressing the navigation keys and press the OK key.

Five labels are available: ( Home ),

( Mobile ), ( Office ), ( Other ) and ( FAX ).

3. Enter a name of up to 16 characters.

For further information about entering characters, see page 27.

C al F nc on s

4. Press the key to move through the fields and fill in each field as needed.

• Home / Mobile / Office / Other / FAX : Add a number in the Phone Number field. You can enter a speed dial number from 000 to 999 in the box at the right side of the label. Note that speed dialing is not available for fax numbers.

• E-mail : You can enter an e-mail address.

• No Group : Select a caller group by pressing the or key. The ring melody for the group also appears.

• Memo : Enter a memo to remind you of the person.

5. When you finish entering, press the OK key to save the entry.

6. Select Yes by the or key confirm your input, and press the OK key.

Entering Text

When you are asked to enter characters, the available text input modes appear at the bottom of the display.

1. To select

Hebrew only

Upper case English

Lower case English

Symbols only

Press the Menu key until highlights.

highlights.

highlights.

highlights.

27

28

C al F nc on s

2. Press the key labeled with the required letter:

- Once for the first letter

- Twice for the second letter

- And so on

• To enter a number, press and hold the corresponding key.

• Press the key to move the cursor to the right.

• Press the CLR key to clear the characters to the left one by one. Pressing and holding the key clears out the display.

• You can move the cursor by pressing the or key. Then add characters using the alphanumeric keys or put a space between each word by pressing the # key.

• If you select the symbol mode, the available symbols are displayed. Highlight one by pressing the or key and then press the OK key. To display more symbol sets, press the or key.

Finding a Number in Phonebook

1. Press the key in Standby Mode and press the

OK key. The list of all the names in Phonebook displays.

2. Press thee or key to scroll to a name.

3. Press the or key to find the number.

C al F nc on s

4. Press the key to place a call to the number.

Press the OK key to view the details about the name.

5. When you view the details about the name, press the MENU key to display the following options:

• Edit : allows you to edit the name entry.

• Delete : deletes the selected item.

While scrolling through the Phonebook list, you can access the following options by pressing the MENU key :

Edit : allows you to edit the name entry.

Delete Name : deletes the name entry.

New : allows you to create a new name entry.

You can find a number using specific information, such as the location number, name, number or group.

For detailed information, see page 56.

29

30

C al F nc on s

Speed Dialing

Once you have stored phone numbers with a speed dial number, you can dial them easily with a few presses of the keys.

One-Touch Dial : Memory locations 000 through 009 are special one-touch locations. You can dial the phone numbers stored in those locations simply by pressing one key.

Press and hold the third digit of the memory location containing the number to be dialed.

For example: Location no. 009

Press and hold the 9 key.

The number (and name) stored displays, and then dials.

Two-Touch Dial : Memory locations 010 through

099 are special two-touch locations.

Press the second digit briefly, and then hold down the third digit of the memory cell.

For example: Location no. 023

Press the 2 key briefly and hold down the

3 key.

The number (and name) stored displays, and then dials.

C al F nc on s

Three-Touch Dial : Memory locations 100 through

999 are special three-touch locations.

Press the first and the second digit briefly, and then hold down the third digit of the memory cell.

For example: Location no. 123

Press the 1 and 2 keys briefly, and then hold down the 3 key.

The number (and name) stored displays, and then dials.

Four-digit Dialing

You can quickly dial a phone number in Phonebook or

Call Logs by entering its last four consecutive digits.

Your phone dials the entire number for you.

Enter the last four digits of the phone number. Your phone automatically dials the phone number matching the four digits.

If there is more than one phone number that contains those four digits in your Phonebook or Call Logs, the first available number displays. Scroll through the numbers using the navigation keys to display the one you want. Press the key to dial the number.

31

32

C al F nc on s

Pause Dialing

When you call an automated system, like a banking services, you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Phonebook, separated by special characters which are called pauses.

Storing Pauses in a Phonebook Entry

To store a number in your Phonebook that contains pauses:

1. Enter the phone number you want to store, such as the bank’s teleservice phone number.

2. Press the MENU key. A “p” displays, indicating a hard pause.

3. Enter the digits that need to follow the pause, such as your account number.

4. Repeat steps 2 and 3 to add more pauses and numbers, if necessary.

5. Store the number in your Phonebook as you normally would by pressing the key and following from step 2 on page 26.

C al F nc on s

Pause Dialing from a Stored Phonebook Entry

1. Dial the number of the service from Phonebook.

2. Wait for the appropriate prompt from the system you are calling.

3. When prompted, press the key to send the

DTMF (Dual Tone Multi Frequency) number that follows your hard pause.

“Send DTMF” flashes on the display and the transmitted tone sounds.

4. Repeat step 2, if necessary.

Manual Pause Dialing

You can enter pauses manually during the dialing process.

1. Enter the phone number of the service you want to call, such as a bank’s teleservice phone number.

2. Press the MENU key to enter a hard pause. The phone displays a “p” indicating a hard pause.

3. Enter the number to be sent after the pause and then press the key to dial the first number.

4. After connecting, press the key again at the prompt to transmit the additional number.

33

34

C al F nc on s

Manual Pause Dialing from a Stored Phonebook

Entry

If you have saved numbers, such as your account number or password, you can send the number from your Phonebook during a call.

1. Enter the phone number of the service you want to call and press the key.

2. When prompted, press the key for the

Phonebook menu, and press the 3 and 3 keys.

3. Enter the speed-dial number (000 through 999) of the stored number and press the OK key.

4. Press the OK key to confirm the selected number.

5. Press the OK key for menu options and press the 1 key for Send DTMF .

“Send DTMF” flashes on the display and the transmitted tone sounds.

C al F nc on s

Adjusting the Volume

During a call, if you want to adjust the voice volume, use the volume keys on the left side of the phone.

Press the key to increase the volume level and the key to decrease the level. The graphic on the display shows four levels; the more bars you see, the louder the volume.

35

36

C al F nc on s

Answering a Call

When somebody calls you, the phone alerts you by ringing and blinking the service light.

If the caller can be identified, the caller’s phone number or name, if stored in your Phonebook, appears at the bottom of the display.

1. If necessary, open the folder. Press the key to answer a call.

2. End the call by closing the folder or pressing the key.

Notes:

• You can answer a call while using the phonebook or menu features. The current operation stops.

Options During a Call

Your phone provides a number of functions that you can use during a call. As many of the options are network services, you may not be able to use all of them at all times.

Press the MENU key during a call to access the following options:

Phonebook : allows you to use the Phonebook menu. See page 55 for further information.

C al F nc on s

Messages : allows you to use the Messages menu.

See page 77 for further information.

MIC Mute allows you to switch your phone’s microphone off, so that the other party cannot hear you.

Example: You wish to say something to another person in the room but do not want the other party to hear you.

Silent Key Tone: does not transmit the key tones. It allows you to press keys without hearing annoying key tones during a call.

Send Own Number : sends DTMF tones of your phone number.

SEND: Send DTMF : sends DTMF tones of the currently displayed number. DTMF (Dual Tone Multi

Frequency) tones can be used to control electronic phone services, such as bank-by-phone or voice mail.

During a call, enter the digits you want to send as

DTMF tones, for example, the bank account number and password. Then, press the and OK keys.

Switching to the Whisper Mode

Whisper Mode automatically increases the microphone’s sensitivity to allow the other person to hear your voice even though you may be whispering.

To switch to the whisper mode, press and hold the key during a call.

Note : In normal environments, this feature may cause your voice to be too loud.

37

38

C al F nc on s

Quickly Switching to the Manner Mode

Manner Mode disables all sounds on the phone. This feature is best used in situations where the phone might disturb others, such as in a meeting, at a library or in a theater. You can switch your phone to the manner mode with one touch of a key.

In Standby Mode, press and hold the key until

“Slient mode enabled” and the icon display.

To exit the manner mode and reactivate the previous sound settings, press and hold the key again until

“Slient mode disabled” appears. The icon no longer displays.

Viewing Missed Calls

If you fail to answer a call for any reason, the phone indicates a missed call by displaying a text notification and the phone number of the most recent missed call on the screen. Additionally, if the caller information is available, a Missed Entry is created.

When the display informs you of the call you missed, press the key to call the displayed number or the

OK key to clear the message and return to Standby

Mode.

To view missed calls, access the Incoming menu option ( MENU 1-2 ). Missed calls are indicated by

C al F nc on s

Call Forwarding

This feature provides the option of forwarding incoming calls to another phone number, even though your phone is turned off. Activating Call Forwarding does not affect outgoing calls made from this phone.

Contact your service provider to activate Call

Forwarding.

Call Waiting

You can answer an incoming call while you have a call in progress, if this service is supported by the network. Contact your service provider to activate

Call Waiting.

When a waiting call is detected, the incoming call alert sounds, depending on the network, and a text notification displays.

To answer a waiting call:

1. To answer the call, press the key. The phone connects the calling person, and places the current person on hold.

2. Press the key again to switch between the two people.

39

40

C al F nc on s

Three-Way Calling

This feature enables you to conduct conference calls with two separate people at the same time. The phone records only the first person into the Outgoing

Calls Log. But, you are billed airtime for each of the outgoing calls separately. Contact your service provider to activate Three-Way Calling.

During a three-way call, if one of the callers hangs up, you and the remaining caller will stay connected.

If you initiated the call and you hang up first, all three parties are disconnected.

1. During a conversation, press the key. The phone places the other person on hold.

2. Enter the phone number for the third person and press the key again.

3. When the third person answers, press the key again to begin your three-way call.

Using the Menus

This phone offers a range of functions that allows you to tailor the phone to your needs. These functions are arranged in menus and submenus.

The menus and submenus can be accessed by scrolling or by using the shortcuts.

Accessing Menu Modes

There are two ways to access Menu Mode:

In Standby Mode, press the MENU key to enter

Main Menu Mode.

OR, press the key in Standby Mode to enter

Personal Menu Mode.

Unregistered menu

41

si ng th M nu

You can configure Personal Menu Mode with your favorite menu functions by registering new menus and changing the menu order or icons via the My

Phone menu. Note that you can access the menu only from Personal Menu Mode.

For further details about configuring Personal Menu

Mode, see page 49.

Accessing a Menu Function by Scrolling

1. In Standby Mode, press the MENU or key access Menu Mode.

2. Scroll with the navigation keys to reach the desired menu, for example, Sounds . Press the OK key to enter the menu.

3. Find the menu option you want, for example,

Connect Tone , by scrolling with the or key. Press the OK key to enter the menu option.

If the menu you have selected contains submenus, repeat this step.

4. Scroll with the navigation keys to find the setting of your choice.

42

5. Press the OK key to confirm the selection.

Notes:

• To return to the previous menu level, press the CLR key.

• You can exit the menu without changing the menu settings by pressing the key.

U si g he en s

When you see a blinking box at the bottom of the display in Personal Menu Mode, it means that the highlighted menu has some options available.

Note : The options are unavailable for the My Phone menu.

Press the MENU key for the following options:

Change Icon : allows you to change the menu icon.

For further information, see page 51.

Delete Menu : deletes the menu from the start menu.

Change Order : allows you to change the menu order. For further information, see page 50.

43

44 si ng th M nu

Accessing a Menu Function by Using Its

Shortcut

The main menu items, such as menu, submenus and setting options, are numbered and can be accessed quickly by using their shortcut numbers.

Note: The numbers assigned to each menu function are indicated on the list on page 45.

1. In Standby Mode, press the MENU key to access

Menu Mode.

Within 30 seconds, enter the first digit of the shortcut number. Repeat this for each digit of the shortcut number.

Example: Adjusting the contrast of the external

LCD

Press the 7 , 2 and 3 keys.

7 for Setup , 2 for LCD , and 3 for External LCD

2. Find the setting of your choice by using the navigation keys.

3. Press the OK key to confirm the selection.

U si g he en s

List of Menu Functions

The list shows the menu structure available and indicates the number assigned to each option and the page where you can find a description of each feature.

My Phone

1: Personal Menu

1: Select Menu

2: Set Order

3: Delete Menu

4: Reset Menu

5: Change Icon

6: Change Color

7: Change Theme

8: Icon List

2: Animation

1: Standby Mode

2: Incoming Call

3: Internet

4: Power On

5: Power Off

3: Sliding Text

4: External Clock

5: Dialing Digits

6: Language

7: Memory

Page 49

45

46 si ng th M nu

1: Phonebook

1-1: Outgoing

1-2: Incoming

1-3: Find Number

1-3-1: By Name

1-3-2: By Group

1-3-3: By Location

1-3-4: Last Search

1-4: Add Entry

1-5: Name Ringer

1-5-1: Set Number

1-5-2: Edit Number

1-5-3: Icon List

1-6: Group Editing

1-7: Erase All

1-#: My Phone #

Page 55

2: Organizer

2-1: Calendar

2-2: Memo Pad

2-3: Alarm

2-4: Weekday Alarm

2-5: Calculator

2-6: Unit Converter

2-6-1: Length

2-6-2: Weight

2-6-3: Volume

2-6-4: Area

2-6-5: Temperature

2-7: World Time

Page 64

U si g he en s

3: Comm. Center

3-1: Services Menu

3-1-1: Internet Portal

3-1-2: Java Games

3-1-3: Image & Melody

3-1-4: What’s New?

3-1-5: Multimedia

3-2: Messages

3-2-1: Inbox

3-2-2: Outbox

3-2-3: Drafts

Page 72

4: Games

4-1: Push Push

4-2: Couple Bowling

4-3: Rascal Othello

4-4: Snow Gogo

Page 85

5: Music Box

5-1: Sound Effects

5-2: Melodies

5-3: My Melody

Page 87

47

48 si ng th M nu

6: Sounds

6-1: Ring Volume

6-2: Alert Type

6-3: Message Alert

6-3-1: Alert Type

6-3-2: Alert Interval

6-4: Connect Tone

6-5: Discon. Tone

6-6: Tone Length

Page 89

7: Setup

7-1: Answer Mode

7-2: LCD

7-2-1: Backlight Time

7-2-2: Set Backlight

7-2-2: External LCD

7-3: Modem

7-3-1: Modem Alert

7-3-2: Data/FAX

7-3-3: Port Speed

7-4: Auto Hyphen

7-5: Lock Phone

7-6: Time Manager

7-6-1: Air Time

7-6-2: Set Time

7- : Reset

7-0: Security

7-0-1: Send PIN

7-0-2: Emergency #

7-0-3: NAM

7-0-4: Lock Code

Page 92

My Phone

You can use the My Phone menu to determine the various settings for Personal Menu or the display components.

Note that this menu can be accessed only when you press the key.

Personal Menu

OK-1

This menu option allows you to set up Personal

Menu Mode, which is displayed when you press the key, to suit your preference.

Select Menu

( OK -1-1)

You can register up to 12 menu options on Personal

Menu Mode.

1. Select a menu by pressing the and keys, and press the OK key.

2. Find a submenu by repeating Step 1, if necessary, and press the MENU key to register.

3. Select a menu address by pressing the navigation keys, and press the OK key.

The addresses already occupied are marked by a gray box. If you select one of them, a message appears to confirm that you want to change it.

Select Yes to confirm, or No to cancel and select a new address.

49

50

4. Select an icon from the list by pressing the navigation keys and press the OK key.

The menu option is added to Personal Menu

Mode.

Set Order

( OK -1-2)

This menu option allows you to change the order of the menus.

1. Select the menu you want to move by pressing the or key.

2. Press the key and move it by pressing the or key.

3. Press the key to fix the menu.

4. Press the OK key to save the change.

Delete Menu

( OK -1-3)

You can delete the registered menus from Personal

Menu Mode.

Select the menu that you want to delete and press the OK key.

Reset Menu

( OK -1-4)

This menu option resets Personal Menu Mode to its default status.

When a confirming message appears, select Yes to reset. Select No to cancel your selection.

Change Icon

( OK -1-5)

Using this menu option, you can change the icons for the menus already registered on Personal Menu

Mode.

1. Select the menu of which you want to change the icon by pressing the or key and press the

OK key.

2. Press the OK key to display the icon list.

3. Select an icon from the list using the navigation keys and press the OK key.

Change Color

( OK -1-6)

Using this menu option, you can change the colors for the items on the display.

1. Select an item of which you want to change the color by pressing the key or key.

2. Select a color by pressing the or key.

3. Press the MENU key and adjust the depth of the selected color using the or key, if necessary.

4. Press the OK key to save the setting.

51

52

Change Theme

( OK -1-7)

Using this menu option, you can select the predefined theme colors for the menus. If you select

User Defined , the phone displays the colors you set in the Change Color option.

Icon List

( OK -1-8)

You can view the icons available. Use the navigation keys to scroll through the icon list.

Animation

OK-2

You can set various animated images to display on the background of the display in some situations.

The following options are available:

Standby Mode : allows you to select an image to display on the idle screen.

Incoming Call : allows you to select an image to alert you when a call comes in.

Internet : allows you to select an image to display when you connect to the Internet.

Power On : allows you to select an image to display when you switch the phone on.

Power Off : allows you to select an image to display when you switch the phone off.

Sliding Text

OK-3

You can set the phone to display a greeting message that slides at the top of the idle screen.

1. Select On to turn the feature on.

If you want to turn the feature off, select Off .

2. Press the MENU key.

3. If there is text already entered, press the CLR key to clear it. Enter the text of up to 32 characters.

For further information about entering characters, see page 27.

4. Press the OK key to save your input.

External Clock

OK-4

You can change the type of clock to be displayed on the external LCD in Standby Mode.

Select either Digital Clock or Analog Clock .

53

Dialing Digits

OK-5

This menu option allows you to change the size of the number that displays when you enter a phone number to dial.

Select either Big or Small .

Language

You can change the display language.

You may select either English or Hebrew .

OK-6

Memory

OK-7

54

You can see how many items downloaded from the

Internet are currently stored in your phone’s memory and delete them.

To delete items:

1. Press the navigation keys to scroll to an item you want to delete.

2. When an item highlights, press the MENU key.

Pressing the OK key allows you to view the details about the item.

3. Select Delete or Delete All , and press the OK key.

4. When a confirming message appears, select Yes and press the OK key.

Phonebook

The Phonebook menu allows you to:

• store up to 1000 names, each having up to 5 different numbers, and use them easily.

• view records of the calls you made or received.

• specify the phone to alert you in a distinctive way when you receive a call from individual or a group number stored in your Phonebook.

• view your phone number.

Outgoing

MENU 1-1

Via this menu option, you can view the records of up to 30 of the last phone calls placed from your phone.

Press the OK key after selecting a number. The number, or name if saved in your Phonebook, displays together with the date and time when the call was made. Pressing the MENU key allows you to save the selected number into Phonebook.

Press the key to make a call to the number.

Press the MENU key to use the following options:

Save : allows you to save the number in your

Phonebook.

Delete : deletes the selected call record.

Delete All : deletes all call records.

55

56

P o n

Incoming

MENU 1-2

Via this menu option, you can view the records of up to 30 of the last phone calls placed to your phone.

For details about accessing a record or using the options, refer to “Outgoing” on page 55.

Find Number

MENU 1-3

This option allows you to find the entries stored in the phonebook using speed dial numbers, names, group names, time of call or your last search.

By Name

(Menu 1-3-1)

This option allows you to find a stored number by entering a person’s name.

Note: You can enter this menu by pressing the key in Standby Mode.

1. Enter the first few letters of the name by pressing the associated alphanumeric keys and press the

OK key.

The phone searches for the names on the list beginning with those characters, and then displays the corresponding entries.

2. Press the or key to scroll to a name.

3. Press the or key to find a number under the name.

4. Press the key to place a call to the number.

Press the OK key to view the details about the name.

5. When you view the details about the name, press the MENU key to use the following options:

• Edit : allows you to edit the name entry.

• Delete : deletes the selected item.

While scrolling through the Phonebook list, you can access the following options by pressing the MENU key:

Edit : allows you to edit the name entry.

Delete Name : deletes the selected name entry.

New : allows you to create a new name entry.

By Group

(Menu 1-3-2)

This option allows you to find a stored number by entering the name of its caller group.

1. Select a caller group and press the OK key.

The members of the group display.

2. Press the or key to find a name.

3. Press the or key to find a number under the name.

57

58

P o n

4. Press the key to place a call to the number.

Press the OK key to view the details about the name.

5. When you view the details about the selected name, press the MENU key to use the following options:

• Edit : allows you to edit the name entry.

• Delete : deletes the selected item.

While scrolling through the Phonebook list, you can access the following options by pressing the MENU key:

Edit : allows you to edit the name entry.

Delete Name : deletes the selected name entry.

New : allows you to create a new name entry.

By Location

(Menu 1-3-3)

This option allows you to find a stored number by entering its memory location number.

1. Enter the location number using the number key and press the OK key. The corresponding entry displays.

2. Press the key to place a call to the number.

Press the OK key to view details about the name.

3. When you view the details about the name, press the MENU key to use the following options:

• Edit : allows you to edit the name entry.

• Delete : deletes the item.

When you find a number, you can access the following options by pressing the MENU key.

Change Location : allows you to change the speed dial number of the number.

Cancel Location : allows you to release the speed dial number of the number.

Last Search

(Menu 1-3-4)

This option allows you to view the last number you searched for.

Press the key to place a call to the number.

Press the OK key to view the details about the name.

Add Entry

MENU 1-4

This menu option allows you to add a new name entry.

Create a new entry by following from Step 3 in

“Saving a Number with a Name in Phonebook” on page 26.

59

P o n

Name Ringer

MENU 1-5

If the caller line identification service is available, you can set the phone to alert you to an incoming call from a specific person by using a distinctive icon and ringer.

Setting a Special Ringer for a Number

1. Select Set Number and press the OK key.

2. Select a number from the Phonebook list using the navigation keys and press the OK key.

3. Select the category of the ringer by pressing the or key and press the key.

4. Select the bell or melody by pressing the or key and press the OK key.

5. Select the type of icon from Animal Icon , Human

Icon or Others , and then press the OK key.

6. Scroll to one of the icons by pressing the navigation keys and press the OK key to save the setting.

60

Changing the Special Ringer Settings

1. Select Edit Number and press the OK key.

2. Select the number and press the OK key. The display shows the ringer and the icon you have set.

3. Press the MENU key and select one of the following options:

• Change Setup : allows you to change the ringer and icon.

• Delete Number : cancels the ringer setting.

4. After changing or deleting, press the CLR or the key to exit.

Viewing the Available Icons

1. Select Icon List and press the OK key.

2. Select an icon type and press the OK key.

3. Use the navigation keys to scroll through the icon list.

Group Editing

MENU 1-6

This menu allows you to add a new group and edit or delete the existing groups. You have three default groups and you can add six additional groups.

Adding a New Group

1. From the Group list, press the MENU or OK key.

2. Select Add and press the OK key.

61

62

P o n

3. Enter a name for the group and press the OK key.

You can enter up to 12 characters.

For further information about entering characters, see page 27.

4. Select the ringer category by pressing the or key and press the key.

5. Select the bell or melody by pressing the or key and press the OK key.

Editing an Existing Group

1. Select the group you want to edit and press the

MENU or OK key.

2. Select Edit and press the OK key.

3. Follow Steps from 3 to 6 in “Adding a New Group” to edit the group settings.

Deleting an Existing Group

1. Select the group you want to delete and press the

MENU or OK key.

2. Select Delete and press the OK key.

3. When the confirming message appears, select Yes and press the OK key.

Erase All

MENU 1-7

This menu option allows you to delete all of the

Phonebook entries. To access this menu, you need to enter your four-digit lock code. The lock code is preset to “0000” at the factory.

When the confirming message appears, select Yes to delete all of the phone entries.

My Phone Number

MENU 1-#

You can view your phone number using this menu.

63

64

Organizer

The Organizer feature provides various convenient functions, such as:

• a calendar to manage your schedule and a memo pad.

• an alarm to ring at a specified time once and the particular days of the week.

• a calculator and unit converter.

• a world time clock.

Calendar

MENU 2-1

This option allows you to view the current month as well as the past or future months in calendar format.

In this menu option, the current day is highlighted on the calendar. You can schedule up to 30 events and be alerted by the calendar function before an event begins. Days with scheduled events are marked in purple.

Selecting a Day on the Calendar View

• You can move to the next or the previous day by pressing the or key.

• You can move up or down one week by pressing the or key.

• To display the next or the previous month, use the volume keys on the left side of the phone.

M ga B ox

• You can also use the number keypad.

- 1 : selects today’s date of the previous year.

- 2 : moves to the previous week.

- 3 : selects today’s date of the following year.

- 4 : moves to the previous day.

- 5 : selects today.

- 6 : selects the next day.

- 7 : moves to the previous month.

- 8 : moves to the next week.

- 9 : moves to the next month.

Scheduling a New Event

1. Select a day on the Calendar view, referring to

“Selecting a Day on the Calendar View” on page

64 and press the OK key.

2. If necessary, change the date and press the key.

3. Enter the time for the event.

The Contents field automatically highlights.

4. Press the OK key and enter your event information.

You can enter up to 32 characters. For further information about entering characters, see page

27.

5. Press the OK key to accept your input.

6. Specify when an alarm will inform you of your schedule by pressing the or key, and press the key.

65

66

O rg ni r

7. Select the ring category and then the bell or melody and press the OK key.

8. Press the OK key to save the event.

9. On the Calendar view, you can use the following options by pressing the MENU key:

• Set Schedule: allows you to add a new schedule.

• Delete All: deletes all schedules stored on the calendar.

Viewing a Scheduled Event

Select a day on the Calendar view, referring to

“Selecting a Day on the Calendar View” on page 64 and press the OK key. The list of the events on the selected day appears.

If more than one event is scheduled, press the or key to scroll to an event and press the OK key to view details.

While viewing an event, press the MENU key to use the following options:

Edit : allows you to edit the schedule.

Add : allows you to add a new schedule.

Delete : deletes the schedule.

O rg ni r

Memo Pad

MENU 2-2

You can make up to 5 memos of important things you need to remember.

Writing a New Memo

1. Enter what you need to remember.

You can enter up to 200 characters. For further details about entering characters, see page 27.

2. Press the OK key to save the memo.

3. On the Memo list, you can use the following options by pressing the MENU key:

• New Memo : allows you to create a new memo.

• Delete : deletes the selected memo.

• Delete All : deletes all memos.

Viewing a Memo

If you have already created memos, your list of memos appears when you access the Memo Pad

( MENU 2-2 ) menu option.

To view details, select a memo from the list and press the OK key.

While viewing a memo, press the MENU key to use the following options:

Edit : allows you to edit the memo.

Delete : deletes the memo.

67

O rg ni r

Alarm

MENU 2-3

This option allows you to set up to two alarms to ring at a specified time.

1. Select ALARM 1 or ALARM 2 and press the OK key.

2. When an alarm screen appears, press the MENU key to display the following options:

• Alarm Time : enter the time when the alarm sounds using the number keypad. You need to enter the time in 24-hour format.

• Alarm Melody : select the ring type and then the melody or bell.

• Alarm Type : select the interval for the alarm to ring from Once or Daily .

3. After changing the settings, press the OK key.

4. Repeat Steps 2 and 3, if necessary.

5. When you finish setting the alarm options, select

Set using the navigation keys.

6. Press the OK key to save the setting.

To cancel the alarm, select Release in the Alarm screen.

To stop the alarm when it rings, press one of the volume keys, or any key after opening the folder.

68

Note : Keep in mind that if your phone is off at the specified time, the alarm will not sound.

O rg ni r

Weekday Alarm

MENU 2-4

You can set an alarm to ring at a specified time every day or only on the specified weekdays. This feature is useful when you need a wake-up call.

To set a wake-up call:

1. When a morning call screen displays, press the

MENU key to display the following options:

• Alarm Time : enter the time you want the alarm to ring using the number keypad. You need to enter the time in 24-hour format.

• Melody : select the ringer type and then the melody or bell.

• Alarm Type : select the interval for the alarm to ring from Daily , On Sun-Fri or On Sun-Thu .

2. After changing the settings, press the OK key.

3. Repeat steps 1 and 2, if necessary.

4. When you finish setting the alarm options, select

Set using the navigation keys.

5. Press the OK key to save the setting.

To cancel the weekday alarm, access the Weekday

Alarm menu option ( MENU 2-4 ) and select

Release .

69

O rg ni r

Notes :

• The weekday alarm sounds even when your phone is in the manner mode (see page 38) or if you set the Alert Type menu option ( Menu 6-2 ) to Lamp or

Vibration .

• Keep in mind that if your phone is off at the specified time, the alarm will not sound.

Calculator

MENU 2-5

Using this feature, you can use the phone as a calculator. The calculator provides basic arithmetic functions; addition, subtraction, multiplication and division.

1. Enter the first number using the numeric keys.

Notes:

• To erase mistakes or clear the display, press the

CLR key.

• Use the key to enter a decimal point and the to change the sign of a number to a negative

(-).

2. Set the operation for your calculation by pressing one of the navigation keys according to the illustration on the display: + (add), (subtract), x (multiply), ÷ (divide).

3. Enter the second number and press the OK key to get the result.

70

4. Repeat steps 2 and 3 as many times as required.

5. Press the key to exit.

O rg ni r

Unit Converter

MENU 2-6

This menu allows you to convert a value into another unit of measurement, for example, inches to centimeters.

To perform a unit conversion:

1. Select either Length , Weight , Volume , Area or

Temperature and press the OK key.

2. Select the original unit by pressing the or key.

3. Enter the value to be converted and press the key.

4. Select the required unit by pressing the or key and press the OK key.

The phone displays the result.

5. If necessary, press the CLR key to reset the converter and repeat the conversion.

6. Press the key to exit.

World Time

MENU 2-7

This menu allows you to check the current time for

38 major cities around the world.

Press the navigation keys to scroll through the world map until the time zone you want appears.

71

72

Comm. Center

You can use this menu to:

• navigate the wireless web by using the Internet

Portal.

• send or receive SMS (Short Message Service) messages.

• configure the Internet settings.

Services Menu

MENU 3-1

Your phone comes equipped with a web browser which makes it possible for you to access the wireless web.

The web browser allows you to access up-to-the minute information through your phone. Browsing the wireless web through your phone is unlike using your computer; site providers have selected only the critical aspects of their sites to present to wireless phone users and they have removed most graphics.

You can quickly access this menu by pressing the key in Standby Mode.

Internet Portal

(Menu 3-1-1)

Selecting this option launches the web browser.

Once connected, the Home page or the last page you visited displays.

I nt rn t/ ss ag

What appears on the display when you are connected to the network is dependent on the service provider. To view additional contents, press the key.

Note : You can quickly launch the browser by pressing and holding the key in Standby Mode.

Using the Soft Keys

At the bottom of the browser display is a solid bar which contains browser commands. The MENU and

OK keys below the solid bar are used to execute the commands. These two keys are called “Soft keys” because their function changes depending on where you are in the browser.

Navigating Through the Internet Browser

To scroll through the browser contents select the content stop the current processing return to the previous page

Press the or key. The current content is indicated by “ ˆ .”

OK key.

CLR key.

MENU or CLR key.

73

I nt rn t/ ss ag

Exiting the Internet Browser

To exit the browser, simply press the close the folder at any time. key or

Going Back to the Internet Menu

While navigating the browser, press the key.

Press the OK key when the start menu is selected, and the phone displays the Services Menu screen.

Java Games

(Menu 3-1-2)

You can download various games from the Internet and use them.

Activate

You can enjoy and delete games downloaded from the Internet.

To play an game:

1. When the list of downloaded games displays, scroll to a game you want to play by pressing the or key.

2. Press the OK key to play the game and refer to the on-screen help for further details.

Press the key to delete the game or set the sound.

Press the key to change the display mode; icon or list mode.

74

3. To end the game, press the key.

I nt rn t/ ss ag

To remove a game from the phone’s memory:

1. When the list of downloaded games displays, scroll to the game you want to delete by pressing the navigation keys and press the MENU key.

2. Select Delete .

3. When a confirming message displays, select Yes and press the OK key to delete it. To cancel the selection, press the CLR key.

Download

This option allows you to access the web browser that you can download various games.

Image & Melody

(Menu 3-1-3)

This option allows you to access the web browser that you can download various images and melodies.

What’s New?

(Menu 3-1-4)

You can obtain the up-to-the minute information and news by accessing the Internet.

75

I nt rn t/ ss ag

Multimedia

(Menu 3-1-5)

You can download multimedia items from the

Internet and use them.

Note : Future feature. When this service is available, a seperate update to this user manual will be provided. For further information, please contact your service provider.

Activate

You can play or delete the items downloaded from the Internet.

To play a multimedia item:

1. When the list of downloaded items displays, scroll to the item you want to play by pressing the or key.

2. Press the OK key to play back the item.

Press the CLR to pause the playback and the

MENU key to resume.

To repeat the playback, press and hold the MENU key.

3. To exit the screen, press the key.

To remove a multimedia item from the phone’s memory:

1. When the list of downloaded items displays, scroll to the item you want to delete by pressing the navigation keys and press the MENU key.

76

2. Select Delete .

I nt rn t/ ss ag

3. When a confirming message displays, select Yes and press the OK key to delete it. To cancel the selection, press the CLR key.

Download

This option allows you to access the web browser that you can download various multimedia items.

Messages

MENU 3-2

Using the Messages menu, you can:

• read your text messages and listen to voice messages.

• send text messages.

Inbox

(Menu 3-2-1)

Your phone can receive voice mail and text messages. When the phone receives a message, an alert sounds, and a text notification displays along with a New message icon ( ). The icon remains on the display until you read the text messages or listen to the voice messages.

Your phone receives incoming messages in both

Standby Mode and the talk mode. Messages can be received when the phone is locked, but you cannot access them. To review messages, you must unlock the phone.

Your phone can store up to 100 messages. If the message memory is full, an error message displays and you cannot receive any new messages until you erase the obsolete ones.

77

I nt rn t/ ss ag

Listening to Voice Messages

When you access the Voice menu option ( MENU 3-

2-1-1 ), the information about the latest voice mail, such as the date and time when the mail was received and the caller’s name or number, appears.

To make a call to the caller listen to the voice mail

Press the key.

1 key and follow the voice prompt from the voice mail server.

2 key.

delete the voice mail

Note : You can quickly access your voice mail box by pressing and holding the key in Standby

Mode.

78

Reading Text Messages

When you access the Text menu option ( MENU 3-2-

1-2 ), an indexed list of text messages displays in the order they were received. The first message is the latest one. A symbol in front of the sender’s name or number indicates the status of the message;

• : read messages

• : unread messages

• : urgent messages

• : lock messages

I nt rn t/ ss ag

Select a message using the or key.

To make a call to the sender read the message text delete the message

Press the key.

OK key.

delete all of the messages

MENU key and select the Delete option.

MENU key and select the Delete All option.

While reading a message, press the MENU key to use the following options:

Reply : allows you to send a reply message to the sender.

Forward : allows you to send the message to other people.

Delete : deletes the message.

Save Number : allows you to save the phone number of the sender. For further information about saving a number, see page 26.

Protect : allows you to keep the message from being deleted. Locked messages are marked with the icon on the list. They are not deleted until you unlock by using this option.

While reading a message from the web browser, press the MENU key to use the following options:

Connect : place a call to the callback number.

Delete : deletes the message.

79

I nt rn t/ ss ag

Setting the Message Display

Using the Display Setup menu option ( MENU 3-2-1-

3 ), you can set the phone to display the contents of a new text message when it comes in.

The following options are available:

Full Text : the phone displays the full contents of the message.

Icon Only : the phone displays the New Message icon

( ) only.

Outbox

(Menu 3-2-2)

Using this menu option, you can transmit text messages to multiple destinations.

Creating a New Message

To create and send a text message:

1. On the Outbox screen, press the OK key when New

Message highlights.

Note : You can to quickly access this menu by pressing and holding the key in Standby mode.

2. Enter a message and press the OK key. For further information about entering characters, see page 27.

The message you entered is automatically stored in the Drafts box for future use.

80

Note : The Drafts box can hold up to 80 text items.

When the memory is full, a warning message will appears. You cannot store any more text until you erase the obsolete text.

I nt rn t/ ss ag

3. Enter the phone number of the destination using the number keypad.

Pressing the MENU key allows you to search for a number from the phonebook by a person’s name or group name. Note that just the numbers with the label Mobile are displayed. When you find the number, press the key to place a checkmark and press the OK key.

4. If you want to send the message to more than one person, press the key to fill in another destination field.

Note : You will be billed for each phone number.

5. If necessary, repeat steps 4 and 5 to add more phone numbers. You can enter up to 20 numbers.

6. When you finish entering the phone number(s), press the OK key.

7. If necessary, change the Callback number to which the recipient calls back.

The default Callback number is your phone number.

8. Press the OK key to send the message.

9. When the message is sent successfully, the display asks if you want to save it into the

Outgoing Msg.

menu. Select Yes or No and press the OK key.

81

82

I nt rn t/ ss ag

Reviewing Outgoing Messages

Your phone can store up to 20 messages that you stored after transmission.

1. On the Outbox screen, select Outgoing Msg.

and press the OK key.

2. Select a message using the or key.

3. To Press the view the message delete the message

OK key.

MENU key and select the Delete option.

delete all of the MENU key and select messages in the Outbox the Delete All option.

While viewing a message, press the MENU key to use the following options:

Forward : allows you to send the message to other people.

Edit : allows you to edit the message.

Delete : deletes the message.

I nt rn t/ ss ag

Drafts

(Menu 3-2-3)

You can store the text that you send most frequently for future use in the Drafts box. When you create a message, the text you entered is automatically stored in this menu option. Also, when you receive a call while creating a message, the text you already entered is automatically stored in this menu. The

Drafts box can hold up to 80 messages.

1. Select the text by pressing the or key.

2. To view the message add new text delete the selected text delete all of the text in the menu

Press the

OK key.

MENU key and select the Write New Text option.

MENU key and select the Delete Text option.

MENU key and select the Delete All option.

While viewing a message, press the MENU key to display the following options:

Outgoing : allows you to send an SMS message using the text. For further information about sending a message, see page 80.

Edit Text : allows you to edit the text.

Delete Text : deletes the text.

83

84

Games

You can enjoy four games on your phone; Push

Push , Couple Bowling , Rascal Othello and

Snow Gogo .

To start a game:

1. Press the or key until a game is highlighted and press the OK key.

2. Press the OK key.

• For the Push Push game, the Key Helper appears to help you understand the key operation for the game.

• For the Couple Bowling game, the Menu screen appears, containing the following options:

New Game : starts a new game.

Key control : shows the key operation for the game.

About Game : gives you information on how to play the game, terms, rules or how to calculate your score.

• For the Rascal Othello and Snow Gogo games, the Menu screen appears, containing the following options:

Start : starts a new game.

Introduction ( Info ): gives you an introduction of the game.

Option : set up the options for the game.

Help : shows the key operation for the game.

3. If necessary, select Start or New Game by the or key, press key to start the game.

To stop the game, press the key at any time.

85

86

Music Box

The Music Box menu contains the bells and melodies to alert you to an incoming call. A bell or melody selected in this menu is used according to the setting in the Alert Type menu option ( MENU 6-

2 ).

You can quickly access this menu by pressing the key in Standby Mode.

Note : When the phone is in the manner mode (see page 38), you cannot use this menu.

Sound Effects

MENU 5-1

You can select one of the 25 predefined ringer tones.

Use the navigation keys to listen to the tones available. Each time you select one, it plays for a few seconds.

Melodies

MENU 5-2

You can select one of the 25 predefined ringer melodies.

Use the navigation keys to listen to the melodies available. Each time you select one, it plays for a few seconds.

M us c Bo x

My Melody

MENU 5-3

You can select one of several melodies downloaded from the wireless web. The number of the melodies may vary depending on your phone’s memory available.

Use the navigation keys to listen to the melodies available. Each time you select one, it plays for a few seconds.

87

Sounds

Using this menu, you can customize the sound settings, such as the:

• ring volume or type.

• tone to alert you to an incoming message.

• length of the DTMF tone.

• tone to sound when your call is connected or disconnected.

Note : When the phone is in the manner mode (see page 38), you cannot use this menu.

Ring Volume

MENU 6-1

This option allows you to adjust the ringer volume.

Use the navigation keys or the volume keys on the left side of the phone to adjust the volume. The display shows the volume level.

88

Alert Type

MENU 6-2

This option allows you to indicate how you are to be informed of any incoming calls.

The following options are available:

Ring/Melody : The phone rings using the bell or melody selected in the Music Box menu ( MENU 5 ).

Vibration : The phone vibrates but does not ring.

S u n

Lamp: The backlight switches on and the service light blinks; the phone neither rings nor vibrates.

Vibration+Ring : The phone vibrates and then rings.

Ring+Vibration : The phone rings and then vibrates.

Message Alert

MENU 6-3

When you receive a new message, the phone alerts you. You can set how frequently this happens and which alert type sounds by using this menu option.

If you receive a message during a call, the phone automatically mutes the ringer and provides a call waiting tone. This is to avoid ringing in your ear while you are trying to talk.

The following options are available:

Alert Type

(Menu 6-3-1)

You can set the alert type for the message alert from

Alert Type 1 through Alert Type 5 . The Vibration option vibrates the phone. Selecting Lamp flashes the service light, but does not sound the message alert.

89

Alert Interval

(Menu 6-3-2)

You can set how often your phone alerts you that there are new received messages either Once or

Every 2 min . Selecting No Alert does not sound the message alert.

Connect Tone

MENU 6-4

With this menu option On , the phone sounds a tone when your call is connected to the system.

To turn the connect tone off, select Off .

Disconnect Tone

MENU 6-5

With this menu option On , the phone sounds a tone when a call is disconnected or dropped from the system.

To turn the disconnect tone off, select Off .

Tone Length

MENU 6-6

90

This menu option allows you to select Short or

Long DTMF (Dual-tone Multi-Frequency) tones.

DTMF tones are sent by your phone to access teleservices, such as a bank account. The system used by the bank or other service determines if you need short or long DTMF tones. If the service is digital, as most are, short DTMF tones will almost always work.

Setup

Many different features of your phone can be customized to suit your preferences.

Answer Mode

MENU 7-1

This menu option allows you to select how to answer an incoming call. It is preset to the Send Key option.

The following options are available:

Open Folder : the phone answers when you open the folder.

Any Key : the phone answers when you press any key except for the key.

Send Key : the phone answers only when you press the key.

LCD

MENU 7-2

Backlight Time

(Menu 7-2-1)

You can set the length of time the phone waits until the backlight turns off after you press the last key or open the folder; either 15 Seconds On , 30 Seconds

On or 60 Seconds On .

91

Set Backlight

(Menu 7-2-2)

You can set the backlight mode. Normal Mode flashes the backlight when you press any key. Select

Saving Mode to use the backlight only between

5:00 PM and 8:00 AM. Doing this saves the battery power.

External LCD

(Menu 7-2-3)

This option allows you to adjust the contrast of the external LCD

Adjust the brightness using the navigation keys, or the volume keys on the left side of the phone.

Modem

MENU 7-3

92

Your phone is capable of sending or receiving digital data and fax calls when connected to a computing device (laptop, desktop, handheld, palmtop, etc.) running Windows NT, Windows 98 or later versions.

The phone functions just like a typical modem on your PC, enabling you to use wireless data involving a wide variety of Windows software applications.

To use digital data or fax services with your phone, you need to obtain a digital data/fax kit from your local Samsung dealer. This kit contains the necessary cables, software, and user’s manual required for you to connect and use your phone with your computing device.

S tu

Refer to your data kit manual for further details about setting up your computing device.

Note: The phone must be on a digital network to receive faxes and data.

Modem Alert

(Menu 7-3-1)

This option allows you to set how you are alerted when the phone receives data or fax calls.

Select the ringer type and then select the bell or melody.

Data/FAX

(Menu 7-3-2)

You can set the phone to function as a modem to send or receive voice, data and fax calls.

The following options are available:

Voice Only : You can set the phone to send or receive voice calls only.

Data Only : You can set the phone to automatically receive data calls only. You can select from Off , For

10 min.

and Always .

FAX Only : You can set the phone to automatically receive fax calls only. You can select from Off , For

10 min.

and Always .

93

94

Port Speed

(Menu 7-3-3)

This menu allows you to select the speed for the communication between your phone and the computing device.

Select one from Auto Speed, 19.2 kbps and 115.2

kbps .

Auto Hyphen

MENU 7-4

When this option is set to On , your phone automatically hyphenates numbers when you enter a phone number, for example, 000-0000000. Digits following a pause are not hyphenated.

S tu

Lock Phone

Menu 7-5

This menu allows you to lock the phone. Locking the phone limits all use of your phone. To access this menu, you need to enter your four-digit lock code.

The lock code is preset to “0000” at the factory.

The following options are available:

Auto Lock : after unlocking the phone temporarily, you can lock the phone simply by closing the folder.

Release : releases the lock mode.

In the lock mode, you can make emergency calls using stored emergency numbers (see page 99).

Simply enter one of them and press the key.

To use the phone in the lock mode, enter the fourdigit lock code. Your phone unlocks temporarily and you can use it.

To release the lock mode, press the Menu key and enter the lock code to unlock the phone temporarily.

Access the Lock Phone menu and select Release to unlock your phone completely.

95

96

Time Manager

MENU 7-6

Using this menu option, you can:

• view the length of your calls.

• set the current date and time.

Air Time

(Menu 7-6-1)

Your phone keeps track of the amount of air time, or call time, used. Using this option, you can view the airtime for the last call or all calls made to or from your phone. You can also easily reset the airtime measurement.

The display shows the following measurements:

Last Call : shows the air time of the last call.

Total Calls : shows the number of all calls made to or from your phone and the total duration of the calls since the air time counter was last set to zero by using the Delete Total option.

Data Calls : shows the air time of the all data calls.

Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding-off for billing purposes and so forth.

S tu

While viewing the air time, press the MENU key to use the following options:

Delete Last : deletes the “Last Call” measurement.

Delete Total : deletes the “Total Calls” measurement.

Delete Data : deletes the “Data Calls” measurement.

Delete All : deletes all measurements at the same time.

Set Time

(Menu 7-6-2)

This option enables you to set the current date and time.

Enter the date and time using the number keypad.

You can move the cursor between the date and the time fields by pressing the or key.

The month, day, hour and minute must be entered using 2 digits and the year requires all four digits.

You need to enter the hour in 24-hour format; for example, enter 15 and 30 for 3:30 PM.

97

98

Reset

MENU 7-

Using this menu option, you can reset your phone to its default status. To access this menu, you need to enter your four-digit lock code. The lock code is preset to “0000” at the factory.

The following options are available:

Settings Only : resets all user-selectable setting options to their default settings.

Clear All : erases all data you have stored in the phone’s memory, such as Phonebook entries, memos, schedules, call records and bookmarks.

When a confirmation displays explaining that you will reset all the menu options, select Yes to confirm. The phone turns off by itself and back on, reboots, and then returns to Standby Mode.

Select No to cancel your selection.

S tu

Security

MENU 7-0

Your phone provides you with various security options, including a user-programmable lock code and special number features.

Send PIN

(Menu 7-0-1)

By setting the phone to send the PIN code when dialing, you can prevent your phone from being used by unauthorized people. The phone prompts you to enter the your PIN code when you make a call, therefore, a person who doesn’t have the code will not be able to use your phone.

Select Set to turn this feature on, or Release to cancel.

Note : Your service provider must enable this feature and assign you a PIN code in order for this feature to work. Contact your service provider for complete information about the

PIN code.

Emergency Number

(Menu 7-0-2)

This feature allows you to store up to seven emergency numbers so that you can make a call using them even when the phone is locked. Your phone has four default emergency numbers; 100,

101, 102, and 166.

99

100

To store an emergency number:

1. Select a location by pressing the or key, and press the OK key.

2. If there is a number already stored in the selected location, press the CLR key to clear the number.

3. Enter a phone number and press the OK key to save.

Each emergency number can be up to 12 digits long.

To call an emergency number in the lock mode, simply enter one of the stored numbers and press the key.

NAM

(Menu 7-0-3)

NAM stands for numerical assignment moduleessentially your phone number. Your phone can have two NAMs. This means that you can have two phone numbers for using your phone and can quickly and easily switch your service back and forth between the two numbers.

When you change the NAM, the phone turns off by itself and then back on, or reboot, and acquires service using the new NAM setting.

S tu

Lock Code

(Menu 7-0-4)

This feature allows you to change your current lock code to a new one. The lock code is preset to “0000” at the factory.

Enter the current code, and enter a new code. Enter it once again at the prompt.

Note : Your phone does not allow viewing of the lock code for security reasons. So, if you have changed the lock code, be sure to write it down or memorize it.

101

Health and Safety

Information

Exposure to Radio Frequency (RF) Signals

Your wireless phone is a radio transmitter and receiver.

It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission

(FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards that were developed by independent scientific organizations through periodic and through evaluation of scientific studies.

The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless phones employs a unit of measurement known as Specific Absorption Rate

(SAR). The SAR limit set by the FCC is 1.6W/kg*.

* In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

102

H ea th a nd S af et y nf ma ti n

SAR tests are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the phone.

Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure.

The tests are performed in positions and locations

(e.g., at the ear and worn on the body) as required by the FCC for each model. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.

The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the

Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC

ID printed in the label on the phone.

FCC certification information for this model phone is attached separation paper.

103

104

H ea th a nd S af et y nf ma ti n

For Body Operation

For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with a Samsung-supplied or approved accessory designated for this product or when used with and accessory that contains no metal and that positions the handset a minimum from the body.

The minimum distance for this model phone is written in the FCC certification information from the body.

None compliance with the above conditions may violate FCC RF exposure guidelines.

For more Information concerning exposure to radio frequency signals, see the following websites:

Federal Communications Commission (FCC) http://www.fcc.gov/rfsafety

Cellular Telecommunications Industry Association

(CTIA): http://www.wow-com.com

U.S.Food and Drug Administration (FDA) http://www.fda.gov/cdrh/consumer

World Health Organization (WHO) http://www.who.int/peh-emf/en

H ea lt h nd af et I fo rm io n

Precautions When Using Batteries

• Never use any charger or battery that is damaged in any way.

• Use the battery only for its intended purpose.

• If you use the phone near the network’s base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator.

• Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out.

When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.

• If left unused, a fully charged battery will discharge itself over time.

• Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.

• Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.

105

H ea lt h nd af et I fo rm io n

• Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery.

Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F).

• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and – terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.

• Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire.

Road Safety

Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime.

But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.

When driving a car, driving is your first responsibility.

When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips.

106

H ea lt h nd af et I fo rm io n

1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.

2. When available, use a hands-free device. If possible, add an extra layer of convenience and safety to your wireless phone with one of the many hands-free accessories available today.

3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you.

4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous.

5. Do not take notes or look up phone numbers while driving. Jotting down a To Do list or flipping through your phonebook takes your attention away from your primary responsibility, driving safely.

6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.

107

108

H ea lt h nd af et I fo rm io n

7. Do not engage in stressful or emotional conversations that may be distracting. Make the people with whom you are talking aware that you are driving and suspend conversations that have the potential to divert your attention from the road.

8. Use your wireless phone to call for help. Dial the emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!

9. Use your wireless phone to help others in emergencies. If you see a car accident, crime in progress or other serious emergency where lives are in danger, call the emergency number, as you would want others to do for you.

10. Call roadside assistance or a special nonemergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or any other special nonemergency wireless number.

H ea lt h nd af et I fo rm io n

Operating Environment

Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).

Electronic Devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives.

Pacemakers

Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of

Wireless Technology Research.

109

H ea lt h nd af et I fo rm io n

Persons with pacemakers:

• Should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on

• Should not carry the phone in a breast pocket

• Should use the ear opposite the pacemaker to minimize potential interference

If you have any reason to suspect that interference is taking place, switch off your phone immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives.

Other Medical Devices

If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy.

Your physician may be able to assist you in obtaining this information. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle.

You should also consult the manufacturer of any equipment that has been added to your vehicle.

110

H ea lt h nd af et I fo rm io n

Posted Facilities

Switch off your phone in any facility where posted notices require you to do so.

Potentially Explosive Atmospheres

Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas

(such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.

111

H ea lt h nd af et I fo rm io n

Emergency Calls

This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example).

Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.

To make an emergency call, proceed as follows.

1. If the phone is not on, switch it on.

2. Key in the emergency number for your present location. Emergency numbers vary by location.

3. Press the key.

If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call.

Consult this document and your local cellular service provider.

When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so.

112

H ea lt h nd af et I fo rm io n

Other Important Safety Information

• Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device.

• Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

• Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.

• For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result.

• Switch off your phone before boarding an aircraft.

The use of wireless phones in aircraft may be dangerous to the operation of the aircraft, and is illegal.

• Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.

113

114

H ea lt h nd af et I fo rm io n

Care and Maintenance

Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years.

• Keep the phone and all its parts and accessories out of the reach of small children’s.

• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.

• Do not touch the phone with a wet hand while it is charging. Doing so may cause an electric shock to you or damage to the phone.

• Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.

• Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone’s electronic circuit boards.

H ea lt h nd af et I fo rm io n

• Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-andwater solution.

• Do not paint the phone. Paint can clog the device’s moving parts and prevent proper operation.

• Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator.

The phone may explode when overheated.

• Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices.

• If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.

115

H ea lt h nd af et I fo rm io n

Acknowledging Special Precautions and the

FCC and Industry Canada Notice

Cautions

Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Compliance Information

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received.

Including interference that may cause undesired operation.

Information to User

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

116

H ea lt h nd af et I fo rm io n

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

117

118

Glossary

Airtime : Actual time spent talking on the wireless phone. Most carriers bill customers based on how many minutes of airtime they use each month.

Antenna : A device for transmitting or receiving signals. The size and shape of antennas is determined, in part, by the frequency of the signal they receive. Wireless phones and the base station must have antennas.

Base Station : The fixed radio transmitter/receiver that maintains communications with mobile radio telephones within a given area. (Typically called a cell or cell site)

CDMA (Code Division Multiple Access): A spreadspectrum approach to digital transmission. With

CDMA, each conversion is digitized and then tagged with a code. The mobile phone deciphers only a particular code to pick the right conversation off the air. The transmitted signal is just above noise level across the available bandwidth.

Channel : Communications signals transmit along paths called channels.

Codec : Compression & Decompression.

Deactivation : The process of rendering a wireless phone inactive.

G lo ar y

DTMF (Dual-tone Multi-Frequency ): You send DTMF signals when you enter numbers by pressing the digit keys.

EVRC (Enhanced Variable Rate Codec): EVRC is a new global standard for compressing and decompressing voice signals. EVRC uses a lower bit rate (the number of bits sent per second) than existing CDMA vocoders, while providing significant improvements in voice quality. This technology enables your phone to provide superb voice quality while benefiting from the ability to process more cellular voice calls using less bandwidth than the voice codecs in CDMA networks today.

Frequency : A measure based on time, as one or more waves per second, in an electrical or light wave information signal. A signal’s frequency is stated in cycles-per-second or Hertz (Hz).

Hands-Free : A feature that permits a driver to use a wireless phone without lifting or holding the handset

- an important safety feature for automobiles, tractors and most other motorized vehicles.

LCD (Liquid Crystal Display): Commonly used to refer to the screen display on the wireless phone.

119

120

G lo ar

LED (Light Emitting Diode): Commonly used to refer to a small light on the wireless phone or on the

Desktop Charger. The LED lights on the phone to indicate an incoming call. The lights on the charger indicate that battery charging is taking place.

RF : Radio Frequency

Roaming : The ability to use a wireless phone to make and receive calls in places outside of the home service area.

Service Charge : The amount paid each month to receive wireless service.

Standby Time: The amount of time a fully charged wireless portable or transportable phone can be on and idle without being in use. (See Talk Time)

Talk Time : The length of time a person can talk on a portable or transportable wireless phone without recharging the battery.

Vocoder : Voice Coder. A device used to convert speech into digital signals.

Wireless: Radio-based Systems that allow transmission of telephone or data signals through the air without a physical connection, such as a metal wire (copper) or fiber optic cable.

Index

A

Accessories • 9

Add entry ( 1-4 ) • 59

Air time ( 7-6-1 ) • 96

Alarm ( 2-3 ) • 68

Alert type ( 6-2 ) • 88

Animation • 52

Answer mode ( 7-1 ) • 91

Auto hyphen ( 7-4 ) • 94

B

Backlight ( 7-3 ) • 15, 91

Battery charging • 18 installing • 16 low battery indicator • 20 removing • 17 precautions • 105

C

Calendar ( 2-1 ) • 64

Calculator ( 2-5 ) • 70

Call answering • 36 emergency • 99, 112 ending • 25 forwarding • 39 from Phone Book • 26 incoming ( 1-2 ) • 56 making • 24 missed • 38 outgoing ( 1-1 ) • 55 redialing last • 25 three way • 40 waiting • 39

Charging batteries • 18

Clearing memory • 54

Connect tone ( 6-4 ) • 90

Converter, unit • 71

Correcting number • 24

Creating memo • 67 phonebook entry • 26 schedule • 65 new message • 80

D

Date set time ( 7-6-2 ) • 97

Data air time ( 7-6-1 ) • 96

Delete event • 66 memo • 67 outgoing message • 82 phonebook • 63 reserved message • 83 receive message • 79

Dialing digits • 54 four-digit • 31 pause • 32 speed • 30

Disconnect tone ( 6-5 ) • 90

Display

LCD ( 7-2 ) • 13, 91

Download games • 75 images • 75 melodies • 75 multimedia items • 77

DTMF tone, send • 37

E

E-mail address • 27

Emergency number • 99, 112

Entering text • 27

Erase all ( 1-7 ) • 68

Erase memory • 100

External LCD

LCD • 14 clock • 53

121

I nd x

F

Finding number by group • 57 by location • 58 by name • 56 last search • 59

G

Game ( 4 ) • 84

Group editing ( 1-6 ) • 61

H

Hyphen ( 7-4 ) • 94

I

Icon description • 13

In-call options • 36

Incoming calls ( 1-2 ) • 56

Installing battery • 16

J

Java, games • 74

K

Key volume • 10

Keys description • 11 location • 10

L

Language (

-OK-6 )• 54

Last number redialing • 25

Listening voice message • 78

Lock code • 101

Lock the phone • 95

Low battery indicator • 20

M

Memory clearing • 54

Melody • 86

Menus list • 45 scrolling • 42 shortcuts • 44

Messages alerts ( 6-3 ) • 89 outgoing • 80 received text • 78 reserved • 83 voice • 78 new text • 80

Missed calls • 38

Modem, setting • 92

Modes phone • 22 text input • 27

Multimedia items • 76

Music • 86

Mute microphone • 37

My phone • 49

My phone number • 63

N

Names finding • 56 ringer ( 1-5 ) • 60

Number adding in an entry • 59 correcting • 24 finding ( 1-3 ) • 56 saving in the phonebook • 26

O

Organizer ( 2 ) • 64

Outgoing ( 1-1 ) • 55

122

P

Phone layout • 10 my number • 63

Phonebook ( 1 ) • 55

PIN • 21, 99

Power on/off animation • 52

Power save mode • 23

Q

Quick switching to the manner mode • 38

R

Received Messages ( 3-2 ) text • 78 voice • 78

Redialing last number • 25

Removing battery • 17

Reset ( 7-* ) • 98

Reset menu • 50

Ring volume ( 6-1 ) • 88

Roaming • 14

S

Safety information • 102 precautions • 7

Security ( 7-0 ) • 99

Service light • 15

Setting time • 97

Sliding text • 53

Sound, effect • 86

Speed dialing • 30

Standby mode • 22

Switching on/off phone • 21 microphone • 37

I nd x

T

Text, entering • 27

Talk mode • 23

U

Unit, converter ( 2-6 ) • 71

Unpacking • 9

V

Vibration • 88

Voice message • 78

Volume, adjusting key • 10 ring ( 6-1 ) • 88 voice • 10, 35

W

Web browser • 72

World time ( 2-7 ) • 71

Writing new message • 84

123

124 125

126

Licensed by QUALCOMM Incorporated under one or more of the following Patents.

U.S Patent No. 4,901,307 5,056,109 5,099,204

5,101,501 5,103,459 5,107,225

5,109,390

advertisement

Related manuals

Download PDF

advertisement

Table of contents