Basin Faucet
Instruction Manual
Preparation Before Installation
1.This shower system needs to be installed to the wall, please make sure check all the size according to the instruction before installation
2.Clean the impurity and sludge in the hose before assembling to avoid leaking
3.Proper Water pressure should between 0.1Mpa-1.0Mpa
4.Turn off the water supply before installation
Product Dimensions
7.087 "
9.055 "
Installation drawing
1. Confirm the location of the concealed faucet body, then daill two holes on the wall with percussion drill
2. Install the concealed faucet body
Installation drawing
3. Connect hot and cold water inlet pipes
Installation drawing
5. Waiting the wall to be tiled
6. As shown in figure,
install the handle
4. Each pipes shall be pressure tested to ensure no leakage
Installation drawing
7. Install the outlet pipe well
1 2
8.Installation complete