HP Photosmart B109n User Guide
Add to My manuals119 Pages
HP PHOTOSMART B109N is a versatile printer that offers a range of capabilities for your printing, scanning, and copying needs. With its wireless connectivity, you can easily print from your computer, smartphone, or other devices. The HP PHOTOSMART B109N also features a user-friendly control panel and a variety of printing options to meet your specific requirements. Whether you're looking to print high-quality photos, sharp text documents, or everyday copies, the HP PHOTOSMART B109N is a great choice for your home or office.
advertisement
![HP Photosmart B109n User Guide | Manualzz HP Photosmart B109n User Guide | Manualzz](http://s1.manualzz.com/store/data/072459002_1-87583b0b68901965abebe26b8f0b2995-360x466.png)
HP Photosmart Wireless B109 series
Windows Help
HP Photosmart Wireless B109 series
Contents
2 Finish setting up the HP Photosmart
3 Get to know the HP Photosmart
1
2
1 HP Photosmart Wireless B109 series Help
For information about the HP Photosmart, see:
•
“Finish setting up the HP Photosmart” on page 5
•
“Get to know the HP Photosmart” on page 11
•
•
•
•
•
•
•
“Maintain the HP Photosmart” on page 45
•
“Technical information” on page 101
HP Photosmart Wireless B109 series Help 3
Chapter 1
4 HP Photosmart Wireless B109 series Help
2 Finish setting up the
HP Photosmart
•
Add the HP Photosmart to a network
•
Add the HP Photosmart to a network
•
“WiFi Protected Setup (WPS)” on page 5
•
“Wireless with a router (infrastructure network)” on page 6
•
“Wireless without a router (ad hoc connection)” on page 7
WiFi Protected Setup (WPS)
To connect the HP Photosmart to a wireless network using WiFi Protected Setup (WPS), you will need the following:
A wireless 802.11 network that includes a WPS-enabled wireless router or access point.
A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP Photosmart on.
To connect the HP Photosmart using WiFi Protected Setup (WPS)
1.
Do one of the following:
Use Push Button (PBC) method a . Set up wireless connection.
On Home Screen, press button next to Scan .
Press button next to Wireless Menu .
Press button next to WPS .
Press button next to Push Button .
Press corresponding button on WPS-enabled router or other networking device.
Press OK .
b . Install software.
NOTE: The product begins a timer for approximately two minutes in which the corresponding button on the networking device needs to be pressed.
Use PIN method a . Set up wireless connection.
On Home Screen, press button next to Scan .
Press button next to Wireless Menu .
Finish setting up the HP Photosmart 5
Chapter 2
Press button next to WPS .
Press button next to PIN .
The device displays a PIN.
Enter the PIN on WPS-enabled router or other networking device.
Press OK .
b . Install software.
NOTE: The product begins a timer for approximately two minutes in which the
PIN needs to be entered on the networking device.
2.
View the animation for this topic.
Related topics
“Install the software for a network connection” on page 9
Wireless with a router (infrastructure network)
The HP Photosmart Software CD and included USB setup cable provide an easy way to connect the HP Photosmart to your wireless network.
For optimal performance and security in your wireless network, HP recommends you use a wireless router or access point (802.11) to connect the product and the other network elements. When network elements are connected through a wireless router or access point, this is called an infrastructure network.
6
To connect the HP Photosmart to an integrated wireless WLAN 802.11 network, you will need the following:
A wireless 802.11 network that includes a wireless router or access point.
A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP Photosmart on.
Broadband Internet access (recommended) such as cable or DSL.
If you connect the HP Photosmart on a wireless network that has Internet access, HP recommends that you use a wireless router (access point or base station) that uses
Dynamic Host Configuration Protocol (DHCP).
Network name (SSID).
WEP key or WPA Passphrase (if needed).
Finish setting up the HP Photosmart
To connect the product
1.
Insert the product Software CD in the computer CD-ROM drive.
2.
Follow the instructions on the screen.
When you are prompted, connect the product to the computer using the USB setup cable included in the box. The product will attempt to connect to the network. If the connection fails, follow the prompts to correct the problem, and then try again.
3.
When the setup is finished, you will be prompted to disconnect the USB cable and test the wireless network connection. Once the product connects successfully to the network, install the software on each computer that will use the product over the network.
Related topics
“Install the software for a network connection” on page 9
Wireless without a router (ad hoc connection)
Use this section if you want to connect the HP Photosmart to a wireless-capable computer without using a wireless router or access point.
There are two methods you may use to connect the HP Photosmart to your computer using an ad hoc wireless network connection. Once connected, you can install the
HP Photosmart software.
▲ Turn on the wireless radio for the HP Photosmart and the wireless radio on your computer. On your computer, connect to the network name (SSID) hpsetup , which is the default ad hoc network created by the HP Photosmart.
OR
▲ Use an ad hoc network profile on your computer to connect to the product. If your computer is not currently configured with an ad hoc network profile, consult the Help file for your computer Operating System for the proper method to create an ad hoc profile on your computer. Once the ad hoc network profile has been created, insert the installation CD that came with the product and install the software. Connect to the ad hoc network profile you created on your computer.
NOTE: An ad hoc connection can be used if you do not have a wireless router or access point but do have a wireless radio on your computer. However, an ad hoc connection may result in a lower level of network security and possibly reduced performance when compared to an infrastructure network connection using a wireless router or access point.
Add the HP Photosmart to a network 7
Chapter 2
To connect the HP Photosmart to a Windows computer with an ad hoc connection, the computer must have a wireless network adapter and an ad hoc profile. Create a network profile for a Windows Vista or Windows XP computer using the directions below.
NOTE: If you have an operating system other than Windows Vista or Windows XP,
HP recommends that you use the configuration program that came with your wireless
LAN card. To find the configuration program for your wireless LAN card, access your computer's list of programs.
To create a network profile
NOTE: The product comes configured with a network profile with hpsetup as the network name (SSID). However, for security and privacy HP recommends you create a new network profile on your computer as described here.
1.
In the Control Panel , double-click Network Connections .
2.
On the Network Connections window, right-click the Wireless Network
Connection . If you see Enable on the pop-up menu, select it. Otherwise, if you see
Disable on the menu, the wireless connection is already enabled.
3.
Right-click the Wireless Network Connection icon, and then click Properties .
4.
Click the Wireless Networks tab.
5.
Select the Use Windows to configure my wireless network settings check box.
6.
Click Add , and then do the following: a . In Network name (SSID) box, type in a unique network name of your choice.
NOTE: The network name is case sensitive, so it is important to remember any uppercase (capital) and lowercase (small) letters.
b . If there is a Network Authentication list, select Open . Otherwise, go to the next step.
c . In the Data encryption list, select WEP .
d . Make sure that the check box is not selected next to The key is provided for me automatically . If it is selected, click the check box to clear it.
e . In the Network key box, type a WEP key that has exactly 5 or exactly 13 alphanumeric (ASCII) characters. For example, if you enter 5 characters, you might enter ABCDE or 12345 . Or, if you enter 13 characters, you might enter
ABCDEF1234567 . (12345 and ABCDE are examples only. Select a combination of your choosing.)
Alternatively, you can use HEX (hexadecimal) characters for the WEP key. A HEX
WEP key must be 10 characters for 40 bit encryption, or 26 characters for 128 bit encryption.
f . In the Confirm network key box, type the same WEP key you typed in the previous step.
NOTE: You must remember the exact uppercase (capital) and lowercase
(small) letters. If you enter your WEP key incorrectly on the product, the wireless connection will fail.
g . Write down the WEP key exactly as you typed it, including uppercase and lowercase letters.
8 Finish setting up the HP Photosmart
h . Select the check box for This is a computer-to-computer (ad hoc) network; wireless access points are not used .
i . Click OK to close the Wireless network properties window, and then click OK again.
j . Click OK again to close the Wireless Network Properties Connection window.
To connect the product
1.
Insert the product Software CD in the computer CD-ROM drive.
2.
Follow the instructions on the screen.
When you are prompted, connect the product to the computer using the USB setup cable included in the box. The product will attempt to connect to the network. If the connection fails, follow the prompts to correct the problem, and then try again.
3.
When the setup is finished, you will be prompted to disconnect the USB cable and test the wireless network connection. Once the product connects successfully to the network, install the software on each computer that will use the product over the network.
Related topics
“Install the software for a network connection” on page 9
Install the software for a network connection
Use this section to install the HP Photosmart software on a computer connected to a network. Before you install the software, make sure you have connected the
HP Photosmart to a network. If the HP Photosmart has not been connected to a network, follow the onscreen instructions during the software installation to connect the product to the network.
NOTE: If your computer is configured to connect to a series of network drives, make sure that your computer is currently connected to these drives before installing the software. Otherwise, the HP Photosmart software installer might try to use one of the reserved drive letters and you will not be able to access that network drive on your computer.
NOTE: Installation time can range from 20 to 45 minutes depending on your operating system, the amount of available space, and the processor speed of your computer.
To install the Windows HP Photosmart Software on a networked computer
1.
Quit all applications running on your computer.
2.
Insert the Windows CD that came with the product into the CD-ROM drive on your computer and follow the onscreen instructions.
NOTE: If the HP Photosmart is not connected to a network, when prompted, connect the product to the computer using the USB setup cable included in the box. The product will then attempt to connect to the network.
3.
If a dialog box about firewalls appears, follow the instructions. If you see firewall popup messages, you must always accept or allow the pop-up messages.
Add the HP Photosmart to a network 9
Chapter 2
4.
On the Connection Type screen, select an appropriate option, and then click Next .
The Searching screen appears as the Setup program searches for the product on the network.
5.
On the Printer Found screen, verify that the printer description is correct.
If more than one printer is found on the network, the Printers Found screen appears.
Select the product you want to connect.
6.
Follow the prompts to install the software.
When you have finished installing the software, the product is ready for use.
7.
To test your network connection, go to your computer and print a self-test report to the product.
Set up a USB connection
The HP Photosmart supports a rear USB 2.0 High Speed port for connection to a computer.
If you use a USB cable to connect the HP Photosmart to a computer on a network, you can set up printer sharing on your computer. This enables other computers on the network to print to the HP Photosmart, using your computer as the host.
The host computer (your computer, connected directly to the HP Photosmart by a USB cable) has full software functionality. Other computers, which are referred to as the clients , have access only to the print features. HP recommends up to 5 computers for the best performance. You must perform other functions from the host computer or from the control panel on the HP Photosmart.
To connect the product with the USB cable
▲ Refer to the setup instructions that came with your product for information on connecting to a computer with a USB cable.
NOTE: Do not connect the USB cable to the product until you are prompted to do so.
To enable printer sharing on a Windows computer
▲ Refer to the user guide that came with your computer or see the Windows onscreen
Help.
10 Finish setting up the HP Photosmart
3 Get to know the HP Photosmart
•
•
Printer parts
• Front and top views of the HP Photosmart
1 Color graphics display (also referred to as the display)
2 Control panel
3 Photo light
4 Memory card slot for Memory Stick cards
5 Memory card slot for Secure Digital cards
6 On button
7 Paper tray
8 Paper tray extender (also referred to as the tray extender)
9 Glass
10 Lid-backing
11 Lid
12 Cartridge door
13 Cartridge access area
14 Model number location
15 Printhead assembly
• Rear view of the HP Photosmart
Get to know the HP Photosmart 11
Chapter 3
16 Rear door
17 Rear USB port
18 Power connection (Use only with the power adapter supplied by HP.)
Control panel features
Figure 3-1 Control panel features
7
2.
1 Back : Returns to the previous screen.
2 Cancel : Stops the current operation, restores default settings, and clears the current photo selection.
3 OK : Selects a menu setting, value, or photo.
4 Scan : From the Home screen, opens the Scan Menu . When viewing screens other than the
Home screen, selects options related to the current display.
5 Photo : From the Home screen, opens the Photo Menu . When viewing screens other than the
Home screen, selects options related to the current display.
6 Copy : From the Home screen, opens the Copy Menu . When viewing screens other than the
Home screen, selects options related to the current display.
7 Wireless network indicator light : Indicates that the wireless radio is on.
12 Get to know the HP Photosmart
4 How do I?
This section contains links to commonly performed tasks, such as printing photos, scanning, and making copies.
•
“Print photos from a memory card” on page 24
•
“Print on specialty media” on page 28
•
•
•
“Replace the cartridges” on page 46
•
“Scan to a computer” on page 33
•
“Scan to a memory card” on page 34
How do I?
13
Chapter 4
14 How do I?
5 Paper basics
You can load many different types and sizes of paper in the HP Photosmart, including letter or A4 paper, photo paper, transparencies, and envelopes.
This section contains the following topics:
•
“Recommended papers for photo printing” on page 15
•
“Recommended papers for printing” on page 16
•
•
“Information on paper” on page 19
Recommended papers for photo printing
If you want the best print quality, HP recommends using HP papers that are specifically designed for the type of project you are printing.
Depending on your country/region, some of these papers might not be available.
HP Advanced Photo Paper
This thick photo paper features an instant-dry finish for easy handling without smudging.
It resists water, smears, fingerprints, and humidity. Your prints have a look and feel comparable to a store-processed photo. It is available in several sizes, including A4, 8.5
x 11 inch, 10 x 15 cm (4 x 6 inch) (with or without tabs), 13 x 18 cm (5 x 7 inch), and two finishes - glossy or soft gloss (satin matte). It is acid-free for longer lasting documents.
HP Everyday Photo Paper
Print colorful, everyday snapshots at a low cost, using paper designed for casual photo printing. This affordable, photo paper dries quickly for easy handling. Get sharp, crisp images when you use this paper with any inkjet printer. It is available in semi-gloss finish in several sizes, including A4, 8.5 x 11 inch, and 10 x 15 cm (4 x 6 inch) (with or without tabs). For longer-lasting photos, it is acid-free.
HP Photo Value Pack
HP Photo Value Packs conveniently package original HP cartridges and HP Advanced
Photo Paper to save you time and take the guesswork out of printing affordable professional photos with your HP Photosmart. Original HP inks and HP Advanced Photo
Paper have been designed to work together so your photos are long lasting and vivid, print after print. Great for printing out an entire vacation’s worth of photos or multiple prints to share.
To order HP papers and other supplies, go to www.hp.com/buy/supplies . If prompted, choose your country/region, follow the prompts to select your product, and then click one of the shopping links on the page.
NOTE: At this time, some portions of the HP Web site are available in English only.
Paper basics 15
Chapter 5
Recommended papers for printing
If you want the best print quality, HP recommends using HP papers that are specifically designed for the type of project you are printing.
Depending on your country/region, some of these papers might not be available.
HP Advanced Photo Paper
This thick photo paper features an instant-dry finish for easy handling without smudging.
It resists water, smears, fingerprints, and humidity. Your prints have a look and feel comparable to a store-processed photo. It is available in several sizes, including A4, 8.5
x 11 inch, 10 x 15 cm (4 x 6 inch) (with or without tabs), 13 x 18 cm (5 x 7 inch), and two finishes - glossy or soft gloss (satin matte). It is acid-free for longer lasting documents.
HP Everyday Photo Paper
Print colorful, everyday snapshots at a low cost, using paper designed for casual photo printing. This affordable, photo paper dries quickly for easy handling. Get sharp, crisp images when you use this paper with any inkjet printer. It is available in semi-gloss finish in several sizes, including A4, 8.5 x 11 inch, and 10 x 15 cm (4 x 6 inch) (with or without tabs). For longer-lasting photos, it is acid-free.
HP Brochure Paper or HP Superior Inkjet Paper
These papers are glossy-coated or matte-coated on both sides for two-sided use. They are the perfect choice for near-photographic reproductions and business graphics for report covers, special presentations, brochures, mailers, and calendars.
HP Premium Presentation Paper or HP Professional Paper
These papers are heavy two-sided matte papers perfect for presentation, proposals, reports, and newsletters. They are heavyweight for an impressive look and feel.
HP Bright White Inkjet Paper
HP Bright White Inkjet Paper delivers high-contrast colors and sharp text. It is opaque enough for two-sided color usage with no show-through, which makes it ideal for newsletters, reports, and flyers. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors.
HP Printing Paper
HP Printing Paper is a high-quality multifunction paper. It produces documents that look and feel more substantial than documents printed on standard multipurpose or copy paper. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors.
It is acid-free for longer lasting documents.
HP Office Paper
HP Office Paper is a high-quality multifunction paper. It is suitable for copies, drafts, memos, and other everyday documents. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors. It is acid-free for longer lasting documents.
16 Paper basics
HP Iron-On Transfers
HP Iron-on Transfers (for color fabrics or for light or white fabrics) are the ideal solution for creating custom T-shirts from your digital photos.
HP Premium Inkjet Transparency Film
HP Premium Inkjet Transparency Film makes your color presentations vivid and even more impressive. This film is easy to use and handle, and dries quickly without smudging.
HP Photo Value Pack
HP Photo Value Packs conveniently package original HP cartridges and HP Advanced
Photo Paper to save you time and take the guesswork out of printing affordable professional photos with your HP Photosmart. Original HP inks and HP Advanced Photo
Paper have been designed to work together so your photos are long lasting and vivid, print after print. Great for printing out an entire vacation’s worth of photos or multiple prints to share.
ColorLok
HP recommends plain papers with the ColorLok logo for printing and copying of everyday documents. All papers with the ColorLok logo are independently tested to meet high standards of reliability and print quality, and produce documents with crisp, vivid color, bolder blacks, and dry faster than ordinary plain papers. Look for papers with the ColorLok logo in a variety of weights and sizes from major paper manufacturers.
To order HP papers and other supplies, go to www.hp.com/buy/supplies . If prompted, choose your country/region, follow the prompts to select your product, and then click one of the shopping links on the page.
NOTE: At this time, some portions of the HP Web site are available in English only.
Load media
1.
Do one of the following:
Load small-size paper a . Lower paper tray.
Slide paper-width guide outwards.
Load media 17
Chapter 5 b . Load paper.
Insert stack of photo paper into paper tray with short edge forward and print side down.
Slide stack of paper forward until it stops.
NOTE: If the photo paper you are using has perforated tabs, load photo paper so that tabs are closest to you.
Slide paper-width guide inward until it stops at edge of paper.
Load full-size paper a . Lower paper tray.
Slide paper-width guide outwards.
18 Paper basics
b . Load paper.
Insert stack of paper into paper tray with short edge forward and print side down.
Slide stack of paper forward until it stops.
Slide paper-width guide inward until it stops at edge of paper.
2.
View the animation for this topic.
Related topics
“Information on paper” on page 19
Information on paper
The HP Photosmart is designed to work well with most paper types. Test a variety of paper types before buying a large quantity. Find a paper type that works well and is easy
Information on paper 19
Chapter 5 to purchase. HP papers are designed for the best quality results. In addition, follow these tips:
• Do not use paper that is too thin, that has a slick texture, or that stretches easily. It can feed incorrectly through the paper path, causing paper jams.
• Store photo media in its original packaging inside a resealable plastic bag on a flat surface in a cool, dry place. When you are ready to print, remove only the paper you plan to use immediately. When you have finished printing, return any unused photo paper to the plastic bag.
• Do not leave unused photo paper in the paper tray. The paper might start to curl, which might reduce the quality of your printouts. Curled paper can also cause paper jams.
• Always hold photo paper by the edges. Fingerprints on photo paper can reduce print quality.
• Do not use paper that is heavily textured. It can cause graphics or text to print improperly.
• Do not combine different paper types and paper sizes in the paper tray; the entire stack of paper in the paper tray must be the same size and type.
• For best results, do not allow printed photos to stack up in the paper tray.
• Store printed photos under glass or in a storage book to prevent bleeding over time from high humidity.
20 Paper basics
6 Print
“Print on specialty media” on page 28
Related topics
•
•
“Recommended papers for photo printing” on page 15
•
“Recommended papers for printing” on page 16
Print documents
Most print settings are automatically handled by the software application. You need to change the settings manually only when you change print quality, print on specific types of paper or transparency film, or use special features.
To print from a software application
1.
Make sure you have paper loaded in the paper tray.
2.
On the File menu in your software application, click Print .
3.
Make sure the product is the selected printer.
4.
If you need to change settings, click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties ,
Options , Printer Setup , Printer , or Preferences .
NOTE: When printing a photo, you must select options for the specific photo paper and photo enhancement.
Print 21
Chapter 6
5.
Select the appropriate options for your print job by using the features available in the
Advanced , Printing Shortcuts , Features , and Color tabs.
TIP: You can easily select the appropriate options for your print job by choosing one of the predefined print tasks on the Printing Shortcuts tab. Click a type of print task in the Printing Shortcuts list. The default settings for that type of print task are set and summarized on the Printing Shortcuts tab. If necessary, you can adjust the settings here and save your custom settings as a new printing shortcut. To save a custom printing shortcut, select the shortcut and click Save
As . To delete a shortcut, select the shortcut and click Delete .
6.
Click OK to close the Properties dialog box.
7.
Click Print or OK to begin printing.
Related topics
•
“Recommended papers for printing” on page 16
•
•
“View the print resolution” on page 31
•
“Printing shortcuts” on page 31
•
“Set the default print settings” on page 32
•
“Stop the current job” on page 99
Print photos
•
“Print photos saved on your computer” on page 22
•
“Print photos from a memory card” on page 24
Print photos saved on your computer
To print a photo on photo paper
1.
Remove all paper from the paper tray.
2.
Place the photo paper print side down on the right side of the paper tray.
3.
Slide the paper-width guide inward until it stops at the edge of the paper.
4.
On the File menu in your software application, click Print .
5.
Make sure the product is the selected printer.
22 Print
6.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties ,
Options , Printer Setup , Printer , or Preferences .
7.
Click the Features tab.
8.
In the Basic Options area, from the Paper Type drop-down list, select More . Then, select the appropriate photo paper type.
9.
In the Resizing Options area, from the Size drop-down list, select More . Then, select the appropriate paper size.
If the paper size and paper type are not compatible, the printer software displays an alert and allows you to select a different type or size.
10.
(Optional) Select the Borderless printing check box if it is not already checked.
If the borderless paper size and paper type are not compatible, the product software displays an alert and allows you to select a different type or size.
11.
In the Basic Options area, select a high print quality, such as Best , from the Print
Quality drop-down list.
NOTE: To achieve the highest dpi resolution, you can use the Maximum dpi setting with supported types of photo paper. If Maximum dpi is not listed in the
Print quality drop-down list, you can enable it from the Advanced tab. For more
information, see “Print using Maximum dpi” on page 30
.
12.
In the HP Real Life Technologies area, click the Photo fix drop-down list and select from the following options:
• Off: applies no HP Real Life Technologies to the image.
• Basic: enhances low-resolution images; moderately adjusts image sharpness.
13.
Click OK to return to the Properties dialog box.
14.
Click OK , and then click Print or OK in the Print dialog box.
NOTE: Do not leave unused photo paper in the paper tray. The paper might start to curl, which could reduce the quality of your printout. For best results, do not allow printed photos to stack up in the paper tray.
Related topics
•
“Recommended papers for photo printing” on page 15
•
•
“Print using Maximum dpi” on page 30
•
“View the print resolution” on page 31
•
“Printing shortcuts” on page 31
•
“Set the default print settings” on page 32
•
“Stop the current job” on page 99
Print photos 23
Chapter 6
Print photos from a memory card
1.
Do one of the following:
Print photo on small-size paper a . Load paper.
Load up to 10 x 15 cm (4 x 6 inch) photo paper in paper tray.
b . Select project type.
Press button next to Photo on Home screen.
Press button next to Memory Card Print .
c . Insert memory device.
24 Print
1 Memory Stick, Memory Stick Pro, Memory Stick Select, Memory Stick Magic Gate,
Memory Stick Duo or Pro Duo (adapter optional), Memory Stick Pro-HG Duo (adapter optional), or Memory Stick Micro (adapter required)
2 MultiMediaCard (MMC), MMC Plus, Secure MultiMedia Card, MMC Mobile (RS-MMC; adapter required), Secure Digital (SD), Secure Digital Mini, Secure Digital High
Capacity (SDHC), TransFlash MicroSD Card (adapter required)
d . Select photo.
Press button next to Select .
Press OK .
Press button next to Prints to increase number of copies.
e . Print photo.
Press OK .
Print photo on full-size paper a . Load paper.
Load full-size photo paper in paper tray.
b . Select project type.
Press button next to Photo on Home screen.
Press button next to Memory Card Print .
c . Insert memory device.
Print photos 25
Chapter 6
26 Print
1 Memory Stick, Memory Stick Pro, Memory Stick Select, Memory Stick Magic Gate,
Memory Stick Duo or Pro Duo (adapter optional), Memory Stick Pro-HG Duo (adapter optional), or Memory Stick Micro (adapter required)
2 MultiMediaCard (MMC), MMC Plus, Secure MultiMedia Card, MMC Mobile (RS-MMC; adapter required), Secure Digital (SD), Secure Digital Mini, Secure Digital High
Capacity (SDHC), TransFlash MicroSD Card (adapter required) d . Select photo.
Press button next to Select .
Press OK .
Press button next to 4 x 6 Photo until size changes to 8.5 x 11 Photo .
Press button next to Prints to increase number of copies.
e . Print photo.
Press OK .
Print passport photos a . Load paper.
Load full-size photo paper in paper tray.
b . Select project type.
Press button next to Photo on Home screen.
Press button next to Passport Photo Print .
c . Insert memory device.
1 Memory Stick, Memory Stick Pro, Memory Stick Select, Memory Stick Magic Gate,
Memory Stick Duo or Pro Duo (adapter optional), Memory Stick Pro-HG Duo (adapter optional), or Memory Stick Micro (adapter required)
2 MultiMediaCard (MMC), MMC Plus, Secure MultiMedia Card, MMC Mobile (RS-MMC; adapter required), Secure Digital (SD), Secure Digital Mini, Secure Digital High
Capacity (SDHC), TransFlash MicroSD Card (adapter required) d . Select photo.
Press button next to Select .
Press OK .
Press button next to Prints to increase number of copies.
e . Print photo.
Press OK .
2.
View the animation for this topic.
Print photos 27
Chapter 6
Related topics
•
“Recommended papers for photo printing” on page 15
•
“Stop the current job” on page 99
Print envelopes
With the HP Photosmart, you can print on a single envelope, a group of envelopes, or label sheets designed for inkjet printers.
To print a group of addresses on labels or envelopes
1.
Print a test page on plain paper first.
2.
Place the test page on top of the label sheet or envelope, and hold both up to the light. Check the spacing for each block of text. Make adjustments as needed.
3.
Load the labels or envelopes into the paper tray.
CAUTION: Do not use envelopes with clasps or windows. They can get stuck in the rollers and cause paper jams.
4.
Slide the paper-width guide inward against the stack of labels or envelopes until the guide stops.
5.
If you are printing on envelopes, do the following: a . Display the print settings, and click the Features tab.
b . In the Resizing Options area, click the appropriate envelope size in the Size list.
6.
Click OK , and then click Print or OK in the Print dialog box.
Related topics
•
•
“View the print resolution” on page 31
•
“Printing shortcuts” on page 31
•
“Set the default print settings” on page 32
•
“Stop the current job” on page 99
Print on specialty media
To reverse an image for iron-on transfers
1.
On the File menu in your software application, click Print .
2.
Make sure the product is the selected printer.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties ,
Options , Printer Setup , Printer , or Preferences .
4.
Click the Features tab.
5.
In the Paper Type drop-down list, click More , and then select HP Iron-on Transfer from the list.
6.
If the selected size is not what you want, click an appropriate size in the Size list.
7.
Click the Advanced tab.
28 Print
8.
In the Features area, select the Mirror Image check box.
9.
Click OK , and then click Print or OK in the Print dialog box.
NOTE: To prevent jams, manually feed the iron-on transfer sheets into the paper tray one sheet at a time.
To print on transparencies
1.
Load the transparency into the paper tray.
2.
On the File menu in your software application, click Print .
3.
Make sure you have selected the correct printer.
4.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties ,
Options , Printer Setup , Printer , or Preferences .
5.
Click the Features tab.
6.
In the Basic Options area, click the appropriate transparency type in the Paper
Type list.
TIP: If you want to make notations on the back of the transparencies and erase them later without scratching the original, click the Advanced tab, and select the
Mirror Image check box.
7.
In the Resizing Options area, click an appropriate size in the Size list.
8.
Click OK , and then click Print or OK in the Print dialog box.
NOTE: The product automatically waits for transparencies to dry before releasing them. Ink dries slower on film than on plain paper. Make sure you allow enough time for the ink to dry before handling the transparency.
Related topics
•
•
“View the print resolution” on page 31
•
“Printing shortcuts” on page 31
•
“Set the default print settings” on page 32
•
“Stop the current job” on page 99
Print a Web page
You can print a Web page from your Web browser on the HP Photosmart.
If you use Internet Explorer 6.0 or higher for Web browsing, you can use HP Smart Web
Printing to ensure simple, predictable web printing with control over what you want and how you want it printed. You can access HP Smart Web Printing from the toolbar in
Internet Explorer. For more information about HP Smart Web Printing , see the help file provided with it.
Print a Web page 29
Chapter 6
To print a Web page
1.
Make sure you have paper loaded in the paper tray.
2.
On the File menu in your Web browser, click Print .
The Print dialog box appears.
3.
Make sure the product is the selected printer.
4.
If your Web browser supports it, select the items on the Web page that you want to include in the printout.
For example, in Internet Explorer, click the Options tab to select options such as As laid out on screen , Only the selected frame , and Print all linked documents .
5.
Click Print or OK to print the Web page.
TIP: To print Web pages correctly, you might need to set your print orientation to
Landscape .
Print using Maximum dpi
Use maximum dpi mode to print high-quality, sharp images.
To get the most benefit from maximum dpi mode, use it to print high-quality images such as digital photographs. When you select the maximum dpi setting, the printer software displays the optimized dots per inch (dpi) that the HP Photosmart printer will print. Printing in maximum dpi is supported on the following paper-types only:
• HP Premium Plus Photo Paper
• HP Premium Photo Paper
• HP Advanced Photo Paper
• Photo Hagaki cards
Printing in maximum dpi takes longer than printing with other settings and requires a large amount of disk space.
To print in Maximum dpi mode
1.
Make sure you have paper loaded in the paper tray.
2.
On the File menu in your software application, click Print .
3.
Make sure the product is the selected printer.
4.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties ,
Options , Printer Setup , Printer , or Preferences .
5.
Click the Advanced tab.
6.
In the Features area, select the Enable maximum dpi setting check box.
7.
Click the Features tab.
8.
In the Paper Type drop-down list, click More , and then select the appropriate paper type.
9.
In the Print Quality drop-down list, click Maximum dpi .
NOTE: To find out what dpi the product will print based on the paper type and print quality settings you selected, click Resolution .
10.
Select any other print settings that you want, and then click OK .
30 Print
Related topics
“View the print resolution” on page 31
View the print resolution
The printer software displays the print resolution in dots per inch (dpi). The dpi varies according to the paper type and print quality that you select in the printer software.
To view the print resolution
1.
On the File menu in your software application, click Print .
2.
Make sure the product is the selected printer.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties ,
Options , Printer Setup , Printer , or Preferences .
4.
Click the Features tab.
5.
In the Paper Type drop-down list, select the type of paper that you have loaded.
6.
In the Print Quality drop-down list, select the appropriate print quality setting for your project.
7.
Click the Resolution button to view the print resolution dpi for the paper type and print quality combination you selected.
Printing shortcuts
Use printing shortcuts to print with print settings that you use often. The printer software has several specially designed printing shortcuts that are available in the Printing
Shortcuts list.
NOTE: When you select a printing shortcut the appropriate printing options are automatically displayed. You can leave them as is, change them, or create your own shortcuts for commonly used tasks.
Use the Printing Shortcuts tab for the following print tasks:
• General Everyday Printing : Print documents quickly.
• Photo Printing-Borderless : Print to the top, bottom, and side edges of 10 x 15 cm
(4 x 6 inch) and 13 x 18 cm (5 x 7 inch) HP Photo Papers.
• Paper-saving Printing : Print two-sided documents with mutliple pages on same sheet to reduce paper usage.
• Photo Printing-With White Borders : Print a photo with a white border around the edges.
• Fast/Economical Printing : Produce draft-quality printouts quickly.
• Presentation Printing : Print high-quality documents, including letters and transparencies.
• Two-sided (Duplex) Printing : Print two-sided pages with the HP Photosmart manually.
Printing shortcuts 31
Chapter 6
To create a printing shortcut
1.
On the File menu in your software application, click Print .
2.
Make sure the product is the selected printer.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties ,
Options , Printer Setup , Printer , or Preferences .
4.
Click the Printing Shortcuts tab.
5.
In the Printing Shortcuts list, click a printing shortcut.
The print settings for the selected printing shortcut are displayed.
6.
Change the print settings to those you want in the new printing shortcut.
7.
Click Save as and type a name for the new printing shortcut, and then click Save .
The printing shortcut is added to the list.
To delete a printing shortcut
1.
On the File menu in your software application, click Print .
2.
Make sure the product is the selected printer.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties ,
Options , Printer Setup , Printer , or Preferences .
4.
Click the Printing Shortcuts tab.
5.
In the Printing Shortcuts list, click the printing shortcut that you want to delete.
6.
Click Delete .
The printing shortcut is removed from the list.
NOTE: Only the shortcuts that you have created can be deleted. The original HP shortcuts cannot be deleted.
Set the default print settings
If there are settings that you frequently use for printing, you might want to make them the default print settings so they are already set when you open the Print dialog box from within your software application.
To change the default print settings
1.
In the HP Solution Center, click Settings , point to Print Settings , and then click
Printer Settings .
2.
Make changes to the print settings, and click OK .
32 Print
7 Scan
•
“Scan to a computer” on page 33
•
“Scan to a memory card” on page 34
•
“Scan and reprint photos” on page 41
Scan to a computer
To scan to a computer
1.
Load original.
a . Lift lid on product.
b . Load original print side down on right front corner of glass.
Scan 33
Chapter 7 c . Close lid.
2.
Start scan.
a . Press button next to Scan on Home screen.
b . Press button next to Scan to PC .
If product is network-connected, a list of available computers appears. Select computer to which you want to transfer to start the scan.
3.
View the animation for this topic.
Related topics
“Stop the current job” on page 99
Scan to a memory card
To save a scan to a memory card
1.
Load original.
a . Lift lid on product.
b . Load original print side down on right front corner of glass.
34 Scan
c . Close lid.
2.
Select Scan .
a . Press button next to Scan on Home screen.
b . Press button next to Scan to Memory Card .
3.
Insert memory device.
1 Memory Stick, Memory Stick Pro, Memory Stick Select, Memory Stick Magic Gate,
Memory Stick Duo or Pro Duo (adapter optional), Memory Stick Pro-HG Duo (adapter optional), or Memory Stick Micro (adapter required)
2 MultiMediaCard (MMC), MMC Plus, Secure MultiMedia Card, MMC Mobile (RS-MMC; adapter required), Secure Digital (SD), Secure Digital Mini, Secure Digital High Capacity
(SDHC), TransFlash MicroSD Card (adapter required)
4.
Start scan.
▲ Press button next to Scan to Memory Card .
5.
View the animation for this topic.
Related topics
“Stop the current job” on page 99
Scan to a memory card 35
Chapter 7
36 Scan
8 Copy
•
“Copy text or mixed documents” on page 37
•
“Copy photos (reprint)” on page 41
Copy text or mixed documents
Copy text or mixed documents
1.
Do one of the following:
Make a black and white copy a . Load paper.
Load full-size paper in paper tray.
b . Load original.
Lift lid on product.
TIP: To make copies of thick originals, such as books, you can remove the lid.
Load original print side down on right front corner of glass.
Copy 37
Chapter 8
38 Copy
Close lid.
c . Select Copy .
Press button next to Copy .
Press button next to Black Copy .
Press button next to Actual Size .
Press button next to Copies to increase number of copies.
d . Start copy.
Press OK .
Make a color copy a . Load paper.
Load full-size paper in paper tray.
b . Load original.
Lift lid on product.
TIP: To make copies of thick originals, such as books, you can remove the lid.
Load original print side down on right front corner of glass.
Close lid.
c . Select Copy .
Press button next to Copy .
Press button next to Color Copy .
Press button next to Actual Size .
Press button next to Copies to increase number of copies.
d . Start copy.
Press OK .
2.
View the animation for this topic.
Related topics
•
“Change the copy settings” on page 39
•
“Stop the current job” on page 99
Change the copy settings
To set the paper size from the control panel
1.
Press the button next to Copy .
2.
Select the copy type.
3.
Press the button next to 8.5 x 11 Plain .
To set the copy size from the control panel
1.
Press the button next to Copy .
2.
Select the copy type.
3.
Press the button next to Actual Size .
Change the copy settings 39
Chapter 8
To set the number of copies from the control panel
1.
Press the button next to Copy .
2.
Select the copy type.
3.
Press the button next to Copies to increase the number of copies.
40 Copy
9 Reprint photos
To reprint an original photo
1.
Load paper.
▲ Load up to 13 x 18 cm (5 x 7 inch) photo paper in paper tray.
2.
Select project type.
a . Press button next to Photo on Home screen.
b . Press button next to Photo Original Reprint .
3.
Load original.
a . Lift lid on product.
b . Load original print side down on right front corner of glass.
Reprint photos 41
Chapter 9 c . Close lid.
d . Press OK .
4.
Reprint photo.
a . Press OK .
b . Press button next to Prints to increase number of copies.
c . Press OK .
5.
View the animation for this topic.
Related topics
“Stop the current job” on page 99
42 Reprint photos
10 Save photos
You can use the HP Photosmart Software installed on your computer to transfer photos from a memory card to your computer’s hard drive for advanced photo editing, sharing photos online, and printing from your computer.
Before transferring photos to your computer, you need to remove the memory card from your digital camera and insert it in the appropriate memory card slot on the
HP Photosmart.
NOTE: The HP Photosmart must be connected to a computer that has the
HP Photosmart Software installed on it.
To save photos
1.
Insert your memory card into the appropriate slot on the product.
The software opens on your computer.
2.
Follow the onscreen prompts on your computer to save the photos to your computer.
NOTE: Only images that were not previously saved are copied to your computer.
Save photos 43
Chapter 10
44 Save photos
11 Maintain the HP Photosmart
•
Check the estimated ink levels
•
•
•
Cartridge warranty information
•
Print and evaluate a print quality report
Check the estimated ink levels
You can easily check the ink supply level to determine how soon you might need to replace a cartridge. The ink supply level shows an estimate of the amount of ink remaining in the cartridges.
NOTE: If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used in another printer, the ink level indicator might be inaccurate or unavailable.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.
NOTE: Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the product and cartridges for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used. For more information, see www.hp.com/go/inkusage .
To check the ink levels from the HP Photosmart Software
1.
In the HP Solution Center, click Settings , point to Print Settings , and then click
Printer Toolbox .
NOTE: You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Features tab, and then click the
Printer Services button.
The Printer Toolbox appears.
2.
Click the Estimated Ink Level tab.
The estimated ink levels for the ink cartridges appear.
Related topics
“Order ink supplies” on page 48
Maintain the HP Photosmart 45
Chapter 11
Replace the cartridges
To replace the cartridges
1.
Check that power is on.
2.
Remove cartridge.
a . Open cartridge access door.
Wait for print carriage to move to center of product.
b . Press tab on cartridge, then remove it from slot.
3.
Insert new cartridge.
a . Remove cartridge from packaging.
46 Maintain the HP Photosmart
b . Twist orange cap to snap it off. A forceful twist may be required to remove cap.
c . Match color icons, then slide cartridge into slot until it clicks into place.
d . Close cartridge door.
Replace the cartridges 47
Chapter 11
4.
Align cartridges.
a . When prompted, press OK to print cartridge alignment page.
b . Load page print side down on right front corner of glass, and then press OK to scan page.
c . Remove alignment page and recycle or discard it.
5.
View the animation for this topic.
Related topics
“Order ink supplies” on page 48
Order ink supplies
To learn which HP supplies work with your product, order supplies online, or create a printable shopping list, open HP Solution Center, and select the online shopping feature.
Cartridge information and links to online shopping also appear on ink alert messages. In addition, you can find cartridge information and order online by visiting www.hp.com/buy/ supplies .
NOTE: Ordering cartridges online is not supported in all countries/regions. If it is not supported in your country/region, contact a local HP reseller for information about purchasing cartridges.
Cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP printing device. This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with.
During the warranty period the product is covered as long as the HP ink is not depleted and the end of warranty date has not been reached. The end of warranty date, in YYYY/
MM/DD format, may be found on the product as indicated:
48 Maintain the HP Photosmart
For a copy of the HP Limited Warranty Statement, see the printed documentation that came with the product.
Print and evaluate a print quality report
Print quality issues can occur for a variety of reasons. You might be using the wrong software settings or printing a poor quality source file, or there might be a problem with the printing system in the HP Photosmart. If you are unhappy with the quality of your prints, you can print a print quality report to help you determine if the printing system is working properly.
To print a print quality report
1.
Load letter or A4 unused plain white paper into the paper tray.
2.
Press the top-left, bottom-left, top-left, and top-left buttons in sequence.
The Engineering Menu appears.
3.
Press OK to select Manufacturing Menu .
4.
Press OK to select reports menu .
5.
Press OK to select print-mech tap tests .
6.
Press the top-right button until the code displayed changes to 72.
7.
Press OK .
The product prints a print quality report that you can use to diagnose print quality issues.
To evaluate the print quality report
1.
Check the ink levels shown on the page. If a cartridge shows very low ink levels and you find the print quality unacceptable, consider replacing that ink cartridge. Print quality typically deteriorates as cartridges run out of ink.
NOTE: If the print quality report is not legible, you can check the estimated ink levels from the control panel or HP Photosmart Software.
Print and evaluate a print quality report 49
Chapter 11
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the ink cartridges until print quality becomes unacceptable.
2.
Look at the color bars in the middle of the page. The bars should be solid, have sharp edges, and extend with uniform color all the way across the page.
Figure 11-1 Color bars - expected result
• If any of the color bars are irregularly streaked, lighter on one side, or contain one or more streaks of a different color, refer to the following steps.
Figure 11-2 Color bars - irregularly streaked or faded bar (top bar)
Figure 11-3 Color bars - color mixing (yellow bar contains magenta streaks)
◦ Check the estimated ink levels in the cartridges.
◦ Check if the cartridge corresponding to the streaked bar has the orange tab removed.
◦ Reinstall the cartridge and make sure all of the cartridges are properly installed.
50 Maintain the HP Photosmart
◦ Clean the printhead, and then print this diagnostic page again.
◦ If cleaning the printhead does not solve this print quality issue, replace the cartridge corresponding to the streaked bar.
NOTE: If replacing the cartridge does not solve this print quality issue, contact HP support for service.
• If any of the color bars show regular white streaks, refer to the following steps.
◦ If line 11 on the diagnostic page reads PHA TTOE = 0 , align the printer.
◦ If line 11 on the diagnostic page shows a different value or aligning does not help, clean the printhead.
NOTE: If cleaning the printhead does not solve this print quality issue, contact HP support for service.
3.
Look at the large text above the alignment pattern. The type should be sharp and clear.
Figure 11-4 Sample text area - expected result
• If the type is jagged, align the printer, and then print this diagnostic page again.
Figure 11-5 Sample text area - jagged text
• If the text is uneven and ragged at one end, clean the printhead, and then print this diagnostic page again. If this occurs right after a new cartridge is installed, the automatic device servicing routines may solve the problem in a day or so.
Figure 11-6 Sample text area - uneven ink distribution
• If the text is smeared, check if the paper is curled, clean the printhead, and then print this diagnostic page again.
Figure 11-7 Sample text area - streaks or smears
4.
Look at the alignment pattern above the color bars. The lines should be straight and sharp.
Figure 11-8 Alignment pattern - expected result
Print and evaluate a print quality report 51
Chapter 11
If the lines are jagged, align the printer, and then print this diagnostic page again.
Figure 11-9 Alignment pattern - jagged lines
NOTE: If aligning the printer does not solve this print quality issue, contact HP support for service.
If you do not see any defects on the print quality report, then the printing system is working correctly. There is no reason to replace supplies or have the product serviced, because they are functioning properly. If you still have a print quality problem, here are some other things you can check:
• Check the paper.
• Check the print settings.
• Make sure your image has sufficient resolution.
• If the problem seems confined to a band near the edge of your printout, use the software you installed with the product or another software application to rotate the image 180 degrees. The problem might not appear on the other end of the print.
52 Maintain the HP Photosmart
12 Solve a problem
This section contains the following topics:
•
•
•
•
•
•
•
•
HP support
•
•
HP support by phone
Phone support options and availability vary by product, country/region, and language.
This section contains the following topics:
•
•
•
After the phone support period
Phone support period
One year of phone support is available in North America, Asia Pacific, and Latin America
(including Mexico). To determine the duration of phone support in Europe, the Middle
East, and Africa, go to www.hp.com/support . Standard phone company charges apply.
Placing a call
Call HP support while you are in front of the computer and the product. Be prepared to provide the following information:
• Product name (HP Photosmart Wireless B109 series)
• Model number (located near the cartridge access area)
Solve a problem 53
Chapter 12
[[[[[
• Serial number (located on the back or bottom of the product)
• Messages that appear when the situation occurs
• Answers to these questions:
◦ Has this situation happened before?
◦ Can you re-create it?
◦ Did you add any new hardware or software to your computer at about the time that this situation began?
◦ Did anything else occur prior to this situation (such as a thunderstorm, product was moved, etc.)?
For the list of support phone numbers, visit www.hp.com/support .
After the phone support period
After the phone support period, help is available from HP at an additional cost. Help may also be available at the HP online support Web site: www.hp.com/support . Contact your
HP dealer or call the support phone number for your country/region to learn more about support options.
Additional warranty options
Extended service plans are available for the HP Photosmart at additional costs. Go to www.hp.com/support , select your country/region and language, then explore the services and warranty area for information about the extended service plans.
Setup troubleshooting
This section contains setup troubleshooting information for the product.
Many issues are caused when the product is connected to the computer using a USB cable before the product software is installed on the computer. If you connected the
54 Solve a problem
product to your computer before the software installation screen prompted you to do so, you must follow these steps:
Troubleshooting common setup issues
1.
Disconnect the USB cable from the computer.
2.
Uninstall the software (if you have already installed it).
For more information, see
“Uninstall and reinstall the software” on page 59 .
3.
Restart your computer.
4.
Turn off the product, wait one minute, then restart it.
5.
Reinstall the HP Photosmart software.
CAUTION: Do not connect the USB cable to the computer until prompted by the software installation screen.
This section contains the following topics:
•
•
After setting up the product, it does not print
•
The wrong measurements are showing in menus on the display
•
The registration screen does not appear
•
Uninstall and reinstall the software
The product will not turn on
Try the following solutions if there are no light indications, no noise, and no movement from the product when you turn it on.
•
Solution 1: Check the power cord
•
•
Solution 3: Press the On button more slowly
•
Solution 4: Contact HP to replace the power supply
•
Solution 5: Contact HP support for service
Solution 1: Check the power cord
Solution:
• Make sure you are using the power cord that came with the product.
• Make sure the power cord is firmly connected to both the product and the power adapter. Plug the power cord into a power outlet, surge protector, or power strip.
Setup troubleshooting 55
Chapter 12
1 Power connection
2 Power cord and adapter
3 Power outlet
• If you are using a power strip, make sure the power strip is turned on. Or, try plugging the product directly into a power outlet.
• Test the power outlet to make sure it is working. Plug in an appliance that you know works, and see if the appliance has power. If not, then there might be a problem with the power outlet.
• If you plugged the product into a switched outlet, make sure the outlet is switched on. If it is switched on but still does not work, then there might be a problem with the power outlet.
Cause: There was a problem with the power cord or the power supply.
If this did not solve the issue, try the next solution.
Solution 2: Reset the product
Solution: Turn off the product, and then unplug the power cord. Plug the power cord back in, and then press the On button to turn on the product.
Cause: The product experienced an error.
If this did not solve the issue, try the next solution.
Solution 3: Press the On button more slowly
Solution: The product might not respond if you press the On button too quickly.
Press the On button once. It might take a few minutes for the product to turn on. If you press the On button again during this time, you might turn the product off.
56 Solve a problem
CAUTION: If the product still does not turn on, it might have a mechanical failure.
Unplug the product from the power outlet.
Contact HP support for service.
Go to: www.hp.com/support . If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: You pressed the On button too quickly.
If this did not solve the issue, try the next solution.
Solution 4: Contact HP to replace the power supply
Solution: Contact HP support to request a power supply for the product.
Go to: www.hp.com/support .
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: The power supply was not intended for use with this product.
If this did not solve the issue, try the next solution.
Solution 5: Contact HP support for service
Solution: If you have completed all of the steps provided in the previous solutions and are still having a problem, contact HP support for service.
Go to: www.hp.com/support .
If prompted, choose your country/region, and then click Contact HP for technical support.
Cause: You might need assistance to enable the product or software to function properly.
After setting up the product, it does not print
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•
Solution 1: Press the On button to turn on the product
•
Solution 2: Set your product as the default printer
•
Solution 3: Check the connection between the product and computer
Solution 1: Press the On button to turn on the product
Solution: Look at the display on the product. If the display is blank and the On button is not lit, the product is turned off. Make sure the power cord is firmly connected to the product and plugged into a power outlet. Press the On button to turn on the product.
Setup troubleshooting 57
Chapter 12
Cause: The product might not have been turned on.
If this did not solve the issue, try the next solution.
Solution 2: Set your product as the default printer
Solution: Check your computer documentation to change your product to be the default printer.
Cause: You sent the print job to the default printer, but this product was not the default printer.
If this did not solve the issue, try the next solution.
Solution 3: Check the connection between the product and computer
Solution: Check the connection from the product to your computer. Verify that the
USB cable is securely plugged into the USB port on the back of the product. Make sure the other end of the USB cable is plugged into a USB port on your computer.
After the cable is connected properly, turn off the product and then on again. If the product is connected to the computer through a wireless connection, make sure that the connection is active and the product is turned on.
For more information on setting up the product and connecting it to your computer, see the setup instructions that came with the product.
Cause: The product and computer were not communicating with each other.
58 Solve a problem
The wrong measurements are showing in menus on the display
Solution: Change the language setting.
To set your language and country/region
1.
Press the button next to Copy on the Home screen.
The Copy Menu appears.
2.
Press the top-right, middle-left, and bottom-left buttons in sequence.
The Basic Settings menu appears.
3.
Press the button next to Set Language .
4.
Press the buttons next to the up arrow or down arrow icons on the display to scroll through the languages. When the language you want to use is highlighted, press
OK .
5.
When prompted, press the button next to Yes for confirmation.
The Basic Settings menu reappears.
6.
Press the button next to Set Region .
7.
Press the buttons next to the up arrow or down arrow icons on the display to scroll through the countries/regions. When the country/region you want to use is highlighted, press OK .
8.
When prompted, press the button next to Yes for confirmation.
Cause: You might have selected the incorrect country/region when setting up the product. The country/region you select determines the paper sizes shown on the display.
The registration screen does not appear
Solution: You can access the registration (Sign up now) screen from the Windows taskbar by clicking Start , pointing to Programs or All Programs , HP , Photosmart
Wireless B109n series , and then clicking Product Registration .
Cause: The registration screen did not launch automatically.
Uninstall and reinstall the software
If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the HP Photosmart application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the HP Photosmart.
To uninstall and reinstall the software
1.
Disconnect the product from your computer.
2.
On the Windows taskbar, click Start , Settings , Control Panel (or just Control
Panel ).
3.
Double-click Add/Remove Programs (or click Uninstall a program ).
Setup troubleshooting 59
Chapter 12
4.
Select HP Photosmart All-in-One Driver Software , and then click Change/
Remove .
Follow the onscreen instructions.
5.
Restart your computer.
NOTE: It is important that you disconnect the product before restarting your computer. Do not connect the product to your computer until after you have reinstalled the software.
6.
Insert the product CD-ROM into your computer’s CD-ROM drive and then start the
Setup program.
NOTE: If the Setup program does not appear, locate the setup.exe file on the
CD-ROM drive and double-click it.
NOTE: If you no longer have the installation CD, you can download the software from www.hp.com/support .
7.
Follow the onscreen instructions and the setup instructions that came with the product.
When the software installation is complete, the HP Digital Imaging Monitor icon appears in the Windows system tray.
Print troubleshooting
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•
•
•
•
•
•
Contact HP support for service
60 Solve a problem
Check cartridges
Follow these steps.
•
Step 1: Make sure you are using genuine HP ink cartridges
•
Step 1: Make sure you are using genuine HP ink cartridges
Solution: Check to see if your ink cartridges are genuine HP ink cartridges.
HP recommends that you use genuine HP ink cartridges. Genuine HP ink cartridges are designed and tested with HP printers to help you easily produce great results, time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a result of using a non-HP supply will not be covered under warranty.
If you believe you purchased genuine HP ink cartridges, go to: www.hp.com/go/anticounterfeit
Cause: Non-HP ink cartridges were being used.
Step 2: Check the ink levels
Solution: Check the estimated ink levels in the cartridges.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the cartridges until print quality becomes unacceptable.
For more information, see:
“Check the estimated ink levels” on page 45
Cause: The ink cartridges might have insufficient ink.
Check paper
Follow these steps.
•
Step 1: Use the correct paper type
•
Step 2: Load the stack of paper correctly
Step 1: Use the correct paper type
Solution: HP recommends that you use HP papers or any other paper type that is appropriate for the product. Make sure only one type of paper is loaded at a time.
Always make sure the paper you are printing on is flat. For best results when printing images, use HP Advanced Photo Paper.
Cause: The paper type was incorrect or more than one type of paper was loaded.
Print troubleshooting 61
Chapter 12
Step 2: Load the stack of paper correctly
Solution: Remove the stack of paper from the paper tray, reload the paper, and then slide the paper-width guide inward until it stops at the edge of the paper.
NOTE: Do not leave unused photo paper in the paper tray. The paper might start to curl, which could reduce the quality of your printout. For best results, do not allow printed photos to stack up in the paper tray.
For more information, see:
Cause: The paper was loaded incorrectly.
Check product
Follow these steps.
•
•
Step 1: Align the printer
Solution: Aligning the printer can help ensure excellent print quality.
To align the printer from the HP Photosmart Software
1.
Load letter, A4, or legal unused plain white paper into the paper tray.
2.
In the HP Solution Center, click Settings .
3.
In the Print Settings area, click Printer Toolbox .
NOTE: You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Features tab, and then click Printer Services .
The Printer Toolbox appears.
4.
Click the Device Services tab.
5.
Click Align the Printer .
6.
When prompted, ensure plain white letter or A4 paper is loaded in the paper tray, then press OK .
NOTE: If you have colored paper loaded in the paper tray when you align the print cartridges, the alignment will fail. Load unused plain white paper into the paper tray, and then try the alignment again.
The product prints an alignment sheet.
7.
Load the page print side down on the right front corner of the glass, and then press OK to scan the page.
When the On button stops flashing, the alignment is complete and the page can be removed. Recycle or discard the page.
Cause: The printer needed to be aligned.
62 Solve a problem
Step 2: Clean the printhead
Solution: If the previous step did not resolve the issue, try cleaning the printhead.
To clean the printhead from the HP Photosmart Software
1.
Load letter, A4, or legal unused plain white paper into the paper tray.
2.
In the HP Solution Center, click Settings .
3.
In the Print Settings area, click Printer Toolbox .
NOTE: You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Features tab, and then click Printer Services .
The Printer Toolbox appears.
4.
Click the Device Services tab.
5.
Click Clean the printhead .
6.
Follow the prompts until you are satisfied with the quality of the output, and then click Done .
There are two stages of cleaning. Each stage lasts about two minutes, uses one sheet of paper, and uses an increasing amount of ink. After each stage, review the quality of the printed page. You should only initiate the next phase of cleaning if the print quality is poor.
If print quality still seems poor after you complete both stages of cleaning, try aligning the printer. If print quality problems persist after cleaning and aligning, contact HP support.
After cleaning the printhead, print a print quality report. Evaluate the print quality report to see if the print quality problem still exists.
For more information, see:
“Print and evaluate a print quality report” on page 49
Cause: The printhead needed to be cleaned.
Check the print settings
Solution: Try the following:
• Check the print settings to see if the color settings are incorrect.
For example, check to see if the document is set to print in grayscale. Or, check to see if advanced color settings such as saturation, brightness, or color tone, are set to modify the appearance of colors.
• Check the print quality setting and make sure it matches the type of paper loaded in the product.
You might need to choose a lower print quality setting if colors are running into each other. Or, choose a higher setting if you are printing a high-quality photo, and then make sure photo paper such as HP Advanced Photo Paper is loaded in the paper tray. For information on using the maximum dpi mode, see
.
• Make sure the margin settings for the document do not exceed the printable area of the product.
Print troubleshooting 63
Chapter 12
To select a print speed or quality
1.
Make sure you have paper loaded in the paper tray.
2.
On the File menu in your software application, click Print .
3.
Make sure the product is the selected printer.
4.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties ,
Options , Printer Setup , Printer , or Preferences .
5.
Click the Features tab.
6.
In the Paper Type drop-down list, select the type of paper that you have loaded.
7.
In the Print Quality drop-down list, select the appropriate quality setting for your project.
NOTE: To find out what dpi the product will print based on the paper type and print quality settings you selected, click Resolution .
To check your margin settings
1.
Preview your print job before sending it to the product.
In most software applications, click the File menu, and then click Print Preview .
2.
Check the margins.
The product uses the margins you have set in your software application, as long as they are greater than the minimum margins the product supports. For more information about setting margins in your software application, see the documentation that came with the software.
3.
Cancel the print job if the margins are not satisfactory, and then adjust the margins in your software application.
Cause: The print settings were not set correctly.
Reset the product
Solution: Turn off the product, and then unplug the power cord. Plug the power cord back in, and then press the On button to turn on the product.
Cause: The product experienced an error.
Contact HP support for service
Solution: If you have completed all of the steps provided in the previous solutions and are still having a problem, contact HP support for service.
Go to: www.hp.com/support .
If prompted, choose your country/region, and then click Contact HP for technical support.
Cause: You might need assistance to enable the product or software to function properly.
64 Solve a problem
Print quality troubleshooting
Use this section to solve these print quality problems:
•
Photo printouts are hazy, blurry, or have inaccurate color
Photo printouts are hazy, blurry, or have inaccurate color
Solution: For best photo color quality, do not allow printouts to stack on top of photos in the paper tray.
Cause: When printouts are stacked on top of a photo before the ink is completely dry, some color distortion may occur in the photo.
Memory card troubleshooting
Use this section to solve these memory card problems:
•
The product does not read the memory card
•
The photos on the memory card do not transfer to my computer
The product does not read the memory card
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•
Step 1: Insert the memory card properly
•
Step 2: Remove the additional memory card
•
Step 3: Reformat the memory card in your digital camera
Step 1: Insert the memory card properly
Solution: Turn the memory card so that the label faces up and the contacts are facing the product, and then push the card forward into the appropriate slot until the
Photo light turns on.
After the memory card has been inserted properly, the Photo light will blink for a few seconds, and then remain lit.
Cause: The memory card was inserted backwards or upside down.
If this did not solve the issue, try the next solution.
Step 2: Remove the additional memory card
Solution: You can insert only one memory card at a time.
If more than one memory card is inserted, an error message will appear on the display.
Remove the additional memory card to resolve the problem.
Cause: You had inserted more than one memory card.
Memory card troubleshooting 65
Chapter 12
If this did not solve the issue, try the next solution.
Step 3: Reformat the memory card in your digital camera
Solution: Check the computer screen for an error message telling you that the images on the memory card are corrupted.
If the file system on the card is corrupt, reformat the memory card in your digital camera. For more information, see the documentation that came with your digital camera.
CAUTION: Reformatting the memory card will delete any photos stored on the card. If you have previously transferred the photos from your memory card to a computer, try printing the photos from the computer. Otherwise, you will need to retake any photos you might have lost.
Cause: The memory card file system was corrupted.
The photos on the memory card do not transfer to my computer
Try the following solutions.
•
Solution 1: Install the product software
•
Solution 2: Check the connection from the product to your computer
Solution 1: Install the product software
Solution: Install the product software that came with the product. If it is installed, restart your computer.
To install the product software
1.
Insert the product CD-ROM into your computer’s CD-ROM drive and then start the Setup program.
2.
When prompted, click Install More Software to install the product software.
3.
Follow the onscreen instructions and the setup instructions that came with the product.
Cause: The product software was not installed.
If this did not solve the issue, try the next solution.
Solution 2: Check the connection from the product to your computer
Solution: Check the connection from the product to your computer. Verify that the
USB cable is securely plugged into the USB port on the back of the product. Make sure the other end of the USB cable is plugged into a USB port on your computer.
After the cable is connected properly, turn off the product and then on again. If the product is connected to the computer through a wireless connection, make sure that the connection is active and the product is turned on.
66 Solve a problem
For more information on setting up the product and connecting it to your computer, see the setup instructions that came with the product.
Cause: The product was not properly connected to the computer.
Scan troubleshooting
Use this section to solve these scan problems:
•
Scanned image is incorrectly cropped
•
Scanned image shows dotted lines instead of text
•
•
Scanned image is incorrectly cropped
Solution: The autocropping feature in the software crops anything that is not part of the main image. Sometimes this might not be what you want. In that case, turn off autocropping in the software and crop the scanned image manually, or not at all.
Cause: The software was set to automatically crop scanned pictures.
Scanned image shows dotted lines instead of text
Solution: Make a black-and-white copy of the original and then scan the copy.
Cause: If you used the Text image type to scan text that you planned to edit, the scanner might not have recognized color text. The Text image type scans at 300 x 300 dpi, in black and white.
If you scanned an original that has graphics or artwork surrounding the text, the scanner might not have recognized the text.
Text format is incorrect
Solution: Some applications cannot handle framed text formatting. Framed text is one of the scan document settings in the software. It maintains complex layouts, such
Scan troubleshooting 67
Chapter 12 as multiple columns from a newsletter, by putting the text in different frames (boxes) in the destination application. In the software, select the correct format so that the scanned text layout and formatting are retained.
Cause: The scan document settings were incorrect.
Text is incorrect or missing
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•
Solution 1: Adjust the brightness in the software
•
Solution 2: Clean the glass and lid
•
Solution 3: Select the correct OCR language
Solution 1: Adjust the brightness in the software
Solution: Adjust the brightness in the software, and then rescan the original.
Cause: The brightness was not set correctly.
If this did not solve the issue, try the next solution.
Solution 2: Clean the glass and lid
Solution: Turn off the product, unplug the power cord, and use a soft cloth to wipe the glass and the back of the document lid.
Cause: Debris might have been stuck on the glass or on the back of the document lid. This can cause poor-quality scans.
If this did not solve the issue, try the next solution.
Solution 3: Select the correct OCR language
Solution: Select the correct OCR language in the software.
NOTE: If you are using HP Photosmart Essential, the Optical Character
Recognition (OCR) software might not be installed on your computer. To install the OCR software, you must re-insert the software disk and select OCR under the
Custom installation options.
Cause: The scan document settings were not set to the correct optical character recognition (OCR) language. The OCR language tells the software how to interpret the characters it sees in the original image. If the OCR language does not match the language in the original, the scanned text might be incomprehensible.
Copy troubleshooting
Use this section to solve these copy problems:
68 Solve a problem
•
Resize to Fit is not working as expected
Resize to Fit is not working as expected
Try the following solutions.
•
Solution 1: Scan, enlarge, and then print a copy
•
Solution 2: Wipe the glass and the back of the document lid
Solution 1: Scan, enlarge, and then print a copy
Solution: Resize to Fit can only enlarge the original up to the maximum percentage allowed by your model. For example, 200% might be the maximum enlargement percentage allowed by your model. Enlarging a passport photo by 200% might not enlarge it enough for it to fit a full-size page.
If you want to make a large copy of a small original, scan the original into the computer, resize the image in the HP scanning software, and then print a copy of the enlarged image.
NOTE: Do not use the product to copy onto envelopes or other papers it does not support. For more information on recommended media, see
“Recommended papers for printing” on page 16 .
Cause: You were trying to increase the size of an original that was too small.
If this did not solve the issue, try the next solution.
Solution 2: Wipe the glass and the back of the document lid
Solution: Turn off the product, unplug the power cord, and then use a soft cloth to wipe the glass and the back of the document lid.
Cause: Debris might have been stuck on the glass or on the back of the document lid. The product interprets anything it detects on the glass as part of the image.
Errors
This section contains the following categories of messages about your product:
•
•
•
•
•
Ink cartridge and printhead messages
Product messages
The following is a list of product-related error messages:
•
•
Errors 69
Chapter 12
•
•
•
Missing HP Photosmart Software
Firmware revision mismatch
Solution: Contact HP support for service.
Go to: www.hp.com/support .
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: The revision number of the product firmware did not match the revision number of the software.
Memory is full
Solution: Try making fewer copies at a time.
Cause: The document you were copying exceeded the memory of the product.
Scanner failure
Solution: Turn off the product and then turn it on again. Restart your computer and then try to scan again.
If the problem persists, try plugging the power cord directly into a power outlet rather than a surge protector or power strip. If the problem continues, contact HP support.
Go to www.hp.com/support . If prompted, choose your country/region, and then click
Contact HP for information on calling for technical support.
Cause: The product was busy or an unknown cause interrupted your scan.
Improper shutdown
Solution: Press the On button to turn the product on and off.
Cause: The last time the product was used, it was not turned off properly. If the product is turned off by turning off the switch on a power strip or by using a wall switch, the product can be damaged.
Missing HP Photosmart Software
Try the following solutions.
•
Solution 1: Install the HP Photosmart Software
•
Solution 2: Check the connection from the product to your computer
70 Solve a problem
Solution 1: Install the HP Photosmart Software
Solution: Install the product software that came with the product. If it is installed, restart your computer.
To install the product software
1.
Insert the product CD-ROM into your computer’s CD-ROM drive and then start the Setup program.
2.
When prompted, click Install More Software to install the product software.
3.
Follow the onscreen instructions and the setup instructions that came with the product.
Cause: The HP Photosmart Software was not installed.
If this did not solve the issue, try the next solution.
Solution 2: Check the connection from the product to your computer
Solution: Check the connection from the product to your computer. Verify that the
USB cable is securely plugged into the USB port on the back of the product. Make sure the other end of the USB cable is plugged into a USB port on your computer.
After the cable is connected properly, turn off the product and then on again. If the product is connected to the computer through a wireless connection, make sure that the connection is active and the product is turned on.
For more information on setting up the product and connecting it to your computer, see the setup instructions that came with the product.
Cause: The product was not properly connected to the computer.
File messages
The following is a list of file-related error messages:
•
Error reading or writing the file
Errors 71
Chapter 12
•
Unreadable files. NN files could not be read
•
•
•
•
Supported file types for the product
•
Error reading or writing the file
Solution: Check to see if you have the right folder and file name.
Cause: The product software could not open or save the file.
Unreadable files. NN files could not be read
Solution: Reinsert the memory card in the product. If this does not work, retake the photos with your digital camera. If you already transferred the files to your computer, try printing those files by using the product software. The copies might not be damaged.
Cause: Some of the files on the inserted memory card or attached storage device were damaged.
Photos not found
Try the following solutions.
•
Solution 1: Reinsert the memory card
•
Solution 2: Print photos from the computer
Solution 1: Reinsert the memory card
Solution: Reinsert the memory card. If this does not work, retake the photos with your digital camera. If you already transferred the files to your computer, try printing those files by using the product software. The copies might not be damaged.
Cause: Some of the files on the inserted memory card or attached storage device were damaged.
If this did not solve the issue, try the next solution.
Solution 2: Print photos from the computer
Solution: Take some photos with your digital camera, or if you previously saved photos on your computer, you can print them using the product software.
Cause: No photos were found on the memory card.
File not found
Solution: Close some applications and try the task again.
72 Solve a problem
Cause: There was not enough available memory on your computer to create a print preview file.
Invalid file name
Solution: Make sure that you are not using any invalid symbols in the file name.
Cause: The file name you entered was invalid.
Supported file types for the product
The product software only recognizes JPG and TIF images.
File corrupted
Try the following solutions.
•
Solution 1: Reinsert the memory card in the product
•
Solution 2: Reformat the memory card in your digital camera.
Solution 1: Reinsert the memory card in the product
Solution: Reinsert the memory card. If this does not work, retake the photos with your digital camera. If you already transferred the files to your computer, try printing those files by using the product software. The copies might not be damaged.
Cause: Some of the files on the inserted memory card or attached storage device were damaged.
If this did not solve the issue, try the next solution.
Solution 2: Reformat the memory card in your digital camera.
Solution: Check the computer screen for an error message telling you that the images on the memory card are corrupted.
If the file system on the card is corrupt, reformat the memory card in your digital camera.
CAUTION: Reformatting the memory card will delete any photos stored on the card. If you have previously transferred the photos from your memory card to a computer, try printing the photos from the computer. Otherwise, you will need to retake any photos you might have lost.
Cause: The memory card file system was corrupted.
General user messages
The following is a list of messages related to common user errors:
•
•
Errors 73
Chapter 12
•
•
•
•
•
•
Memory card error
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•
Solution 1: Remove all but one memory card
•
Solution 2: Remove the memory card and reinsert it correctly
•
Solution 3: Push the memory card all the way forward
Solution 1: Remove all but one memory card
Solution: Remove all but one memory card. The product reads the remaining memory card and displays the first photo stored on the memory card.
Cause: There were two or more memory cards inserted into the product at the same time.
If this did not solve the issue, try the next solution.
Solution 2: Remove the memory card and reinsert it correctly
Solution: Remove the memory card and reinsert it correctly. The label of the memory card faces up and should be readable as you insert it into the slot.
Cause: You had inserted the memory card backwards or upside down.
If this did not solve the issue, try the next solution.
Solution 3: Push the memory card all the way forward
Solution: Remove the memory card and reinsert it in the memory card slot until it stops.
Cause: You had not fully inserted the memory card.
Cannot crop
Try the following solutions.
•
Solution 1: Close some applications or restart your computer
•
Solution 2: Empty the Recycle Bin on your desktop
74 Solve a problem
Solution 1: Close some applications or restart your computer
Solution: Close all unnecessary applications. This includes applications that run in the background, such as screensavers and virus checkers. (If you turn off your virus checker, remember to turn it back on after you finish.) Try restarting your computer to clear the memory. You might need to purchase more RAM. Refer to the documentation that came with your computer.
Cause: The computer did not have enough memory.
If this did not solve the issue, try the next solution.
Solution 2: Empty the Recycle Bin on your desktop
Solution: Empty the Recycle Bin on your desktop. You might also need to remove files from the hard disk; for example, delete temporary files.
Cause: For scanning, there must be at least 50 MB of space available on your computer's hard disk.
Out of disk space
Solution: Empty the Recycle Bin on your desktop. You might also need to remove files from the hard disk; for example, delete temporary files.
Cause: The computer did not have enough memory.
Card access error
Solution: Remove the memory card and reinsert it in the memory card slot until it stops.
Cause: You had not fully inserted the memory card.
Use only one card at a time
Solution: You can insert only one memory card at a time.
If more than one memory card is inserted, an error message will appear on the display.
Remove the additional memory card to resolve the problem.
Cause: There were two or more memory cards inserted into the product at the same time.
Card is inserted incorrectly
Solution: Turn the memory card so that the label faces up and the contacts are facing the product, and then push the card forward into the appropriate slot until the
Photo light turns on.
After the memory card has been inserted properly, the Photo light will blink for a few seconds, and then remain lit.
Errors 75
Chapter 12
Cause: You had inserted the memory card backwards or upside down.
Card is damaged
Solution: Reformat your memory card in your camera or format your memory card in a computer by selecting the FAT format. For more information, see the documentation that came with your digital camera.
CAUTION: Reformatting the memory card will delete any photos stored on the card. If you have previously transferred the photos from your memory card to a computer, try printing the photos from the computer. Otherwise, you will need to retake any photos you might have lost.
Cause: You may have formatted the card on a Windows XP computer. By default,
Windows XP will format a memory card of 8 MB or less and 64 MB or more with the
FAT32 format. Digital cameras and other devices use the FAT (FAT16 or FAT12) format and cannot recognize a FAT32 formatted card.
Card is not fully inserted
Solution: Turn the memory card so that the label faces up and the contacts are facing the product, and then push the card forward into the appropriate slot until the
Photo light turns on.
After the memory card has been inserted properly, the Photo light will blink for a few seconds, and then remain lit.
Cause: You had not fully inserted the memory card.
Paper messages
The following is a list of paper-related error messages:
•
•
•
Paper upside down
Solution: Load paper in the paper tray print side down.
Cause: Paper in the paper tray was upside down.
Paper orientation error
Solution: Insert paper into the paper tray with the short edge forward and the print side down. Slide the paper forward until it stops.
Cause: Paper in the paper tray was in landscape orientation.
76 Solve a problem
Ink is drying
Solution: Leave the sheet in the paper tray until the message disappears. If it is necessary to remove the printed sheet before the message disappears, carefully hold the printed sheet on the underside or the edges, and place it on a flat surface to dry.
Cause: Transparencies and some other media require a drying time that is longer than normal.
Ink cartridge and printhead messages
The following is a list of printhead and ink cartridge error messages:
•
•
•
•
•
•
•
•
•
•
•
•
•
Previously used genuine HP cartridge
•
•
Problem with printer preparation
Cartridges in wrong slot
Solution: Remove and reinsert the indicated ink cartridges into the correct slots by matching color of cartridges to color and icon for each slot.
Errors 77
Chapter 12
Printing cannot occur without one of each type of ink cartridge inserted into the correct slot.
For more information, see:
“Replace the cartridges” on page 46
Cause: The indicated ink cartridges were inserted into the wrong slots.
General printer error
Try the following solutions.
•
•
Solution 2: Contact HP support
Solution 1: Reset the product
Solution: Turn off the product, and then unplug the power cord. Plug the power cord back in, and then press the On button to turn on the product.
Cause: The product experienced an error.
If this did not solve the issue, try the next solution.
Solution 2: Contact HP support
Solution: Write down the error code provided in the message, and then contact HP support. Go to: www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: There was a problem with the product.
Incompatible ink cartridges
Try the following solutions.
•
Solution 1: Check to see if the ink cartridges are compatible
•
Solution 2: Contact HP support
Solution 1: Check to see if the ink cartridges are compatible
Solution: Check to make sure you are using the correct ink cartridges for your product. For a list of compatible ink cartridges, see the printed documentation that came with the product.
If you are using ink cartridges that are not compatible with the product, replace the indicated ink cartridges with ink cartridges that are compatible.
CAUTION: HP recommends that you do not remove an ink cartridge until a replacement is ready to install.
78 Solve a problem
If it appears that you are using the correct ink cartridges, proceed to the next solution.
For more information, see:
•
“Order ink supplies” on page 48
•
“Replace the cartridges” on page 46
Cause: The indicated ink cartridges were not intended for use in this product as it was currently configured.
If this did not solve the issue, try the next solution.
Solution 2: Contact HP support
Solution: Contact HP support for service.
Go to: www.hp.com/support .
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: The ink cartridges were not intended for use in this product.
Incompatible printhead
Solution: Contact HP support for service.
Go to: www.hp.com/support .
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: The printhead was not intended for use in this product, or it was damaged.
Ink alert
Solution: When you receive an Ink Alert message, you do not need to replace the indicated ink cartridge. However, the amount of ink might be low enough to cause poor print quality. Follow any prompts on the display to continue.
CAUTION: HP recommends that you do not remove an ink cartridge until a replacement is ready to install.
If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used in another product, the ink level indicator might be inaccurate or unavailable.
Ink level warnings and indicators provide estimates for planning purposes only. When you receive an ink alert message, consider having replacement ink cartridges available to avoid possible printing delays. You do not need to replace the ink cartridges until print quality becomes unacceptable.
For more information, see:
“Replace the cartridges” on page 46
Errors 79
Chapter 12
Cause: The indicated ink cartridges did not have enough ink to print properly.
Ink cartridge problem
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•
Solution 1: Install the ink cartridges correctly
•
Solution 2: Close the print carriage latch
•
Solution 3: Clean the electrical contacts
•
Solution 4: Replace the ink cartridge
•
Solution 5: Contact HP support
Solution 1: Install the ink cartridges correctly
Solution: Make sure all of the ink cartridges are properly installed. Refer to the following steps to resolve this error.
To make sure the ink cartridges are properly installed
1.
Make sure the product is turned on.
2.
Open the ink cartridge access door by lifting from the front right of the product, until the door locks into place.
The print carriage moves to the center of the product.
NOTE: Wait until the print carriage stops moving before proceeding.
3.
Make sure the ink cartridges are installed in the correct slots.
Match the shape of the icon and color of the ink cartridge with the slot that has the same shaped icon and color.
80 Solve a problem
4.
Run your finger along the top of the ink cartridges to locate any cartridges that are not snapped completely down.
5.
Press down on any cartridges that are sticking up.
They should snap down into place.
6.
If an ink cartridge was sticking up and you were able to snap it back down into place, close the ink cartridge access door and check if the error message has gone away.
• If the message has gone away, stop troubleshooting here. The error has been resolved.
• If the message has not gone away, proceed to the next step.
• If none of the ink cartridges were sticking up, proceed to the next step.
7.
Locate the ink cartridge that is indicated in the error message, and then press the tab on the ink cartridge to release it from the slot.
8.
Press the ink cartridge back down into place.
The tab should make a snapping noise when the ink cartridge is correctly seated.
If the ink cartridge did not make a snapping noise, the tab might need to be readjusted.
9.
Remove the ink cartridge from the slot.
10.
Gently bend the tab away from the ink cartridge.
Errors 81
Chapter 12
CAUTION: Be careful not to bend the tab out more than about 1.27 cm
(0.5 inches).
11.
Reinstall the ink cartridge.
It should now snap down into place.
12.
Close the ink cartridge access door, and check if the error message has gone away.
13.
If you still receive the error message, turn the product off, and then on again.
Cause: The indicated ink cartridges were not installed correctly.
If this did not solve the issue, try the next solution.
Solution 2: Close the print carriage latch
Solution: Lift the latch handle and carefully lower it to make sure that the latch securing the printhead is securely closed. Leaving the latch handle raised can result in incorrectly seated ink cartridges and problems printing. The latch must remain down in order to correctly install the ink cartridges.
82 Solve a problem
Cause: The print carriage latch was not closed properly.
If this did not solve the issue, try the next solution.
Solution 3: Clean the electrical contacts
Solution: Clean the cartridge electrical contacts.
To clean the electrical contacts
1.
Make sure the product is turned on.
2.
Open the cartridge access door by lifting the blue access handles on the side of the product, until the door locks into place.
The print carriage moves to the center of the product.
NOTE: Wait until the print carriage stops moving before proceeding.
3.
Locate the ink cartridge that is indicated in the error message, and then press the tab on the ink cartridge to release it from the slot.
Errors 83
Chapter 12
4.
Hold the ink cartridge by its sides with the bottom pointing up and locate the electrical contacts on the ink cartridge.
The electrical contacts are four small rectangles of copper or gold-colored metal on the bottom of the ink cartridge.
1 Ink window
2 Electrical contacts
5.
Wipe the contacts with a dry swab or lint-free cloth.
6.
On the inside of the product, locate the contacts in the printhead.
The contacts look like a set of four copper or gold-colored pins positioned to meet the contacts on the ink cartridge.
7.
Use a dry swab or lint-free cloth to wipe the contacts.
8.
Reinstall the ink cartridge.
84 Solve a problem
9.
Close the ink cartridge door, and check if the error message has gone away.
10.
If you still receive the error message, turn the product off, and then on again.
If you still receive this message after cleaning the cartridge contacts, you might have a damaged cartridge.
Check to see if your cartridge is still under warranty and the end of warranty date has not been reached.
• If the end of warranty date has been reached, purchase a new ink cartridge.
• If the end of warranty date has not been reached, contact HP support for service or replacement.
Go to: www.hp.com/support .
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
For more information, see:
•
“Cartridge warranty information” on page 48
•
“Replace the cartridges” on page 46
Cause: The electrical contacts needed to be cleaned.
If this did not solve the issue, try the next solution.
Solution 4: Replace the ink cartridge
Solution: Replace the indicated ink cartridge.
If your cartridge is still under warranty, contact HP support for service or replacement.
Go to: www.hp.com/support .
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
For more information, see:
“Cartridge warranty information” on page 48
Cause: The indicated ink cartridges were defective.
If this did not solve the issue, try the next solution.
Errors 85
Chapter 12
Solution 5: Contact HP support
Solution: Contact HP support for service.
Go to: www.hp.com/support .
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: The product had a problem.
Ink service capacity warning
Solution: If you are going to move or transport the product after receiving this message, make sure you keep it upright and do not tip it on its side to avoid ink leakage.
Printing can continue, but ink system behavior might change.
Cause: The product has nearly maximized the ink service capacity.
Ink system failure
Solution: Turn off the product, unplug the power cord, and wait 10 seconds. Then, plug the power cord back in and turn on the product.
If you continue to receive this message, write down the error code provided in the message on the product display, and then contact HP support. Go to: www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: The printhead or the ink delivery system failed and the product can no longer print.
Check ink cartridges
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•
Solution 1: Install all four ink cartridges
•
Solution 2: Make sure the ink cartridges are installed correctly
•
Solution 3: Contact HP support
Solution 1: Install all four ink cartridges
Solution: Make sure all of the ink cartridges are inserted.
For more information, see:
“Replace the cartridges” on page 46
Cause: One or more of the ink cartridges were not installed.
86 Solve a problem
If this did not solve the issue, try the next solution.
Solution 2: Make sure the ink cartridges are installed correctly
Solution: Make sure all of the ink cartridges are properly installed. Refer to the following steps to resolve this error.
To make sure the ink cartridges are properly installed
1.
Make sure the product is turned on.
2.
Open the ink cartridge access door by lifting from the front right of the product, until the door locks into place.
The print carriage moves to the center of the product.
NOTE: Wait until the print carriage stops moving before proceeding.
3.
Make sure the ink cartridges are installed in the correct slots.
Match the shape of the icon and color of the ink cartridge with the slot that has the same shaped icon and color.
Errors 87
Chapter 12
4.
Run your finger along the top of the ink cartridges to locate any cartridges that are not snapped completely down.
5.
Press down on any cartridges that are sticking up.
They should snap down into place.
6.
If an ink cartridge was sticking up and you were able to snap it back down into place, close the ink cartridge access door and check if the error message has gone away.
• If the message has gone away, stop troubleshooting here. The error has been resolved.
• If the message has not gone away, proceed to the next step.
• If none of the ink cartridges were sticking up, proceed to the next step.
7.
Locate the ink cartridge that is indicated in the error message, and then press the tab on the ink cartridge to release it from the slot.
8.
Press the ink cartridge back down into place.
The tab should make a snapping noise when the ink cartridge is correctly seated.
If the ink cartridge did not make a snapping noise, the tab might need to be readjusted.
9.
Remove the ink cartridge from the slot.
10.
Gently bend the tab away from the ink cartridge.
CAUTION: Be careful not to bend the tab out more than about 1.27 cm
(0.5 inches).
88 Solve a problem
11.
Reinstall the ink cartridge.
It should now snap down into place.
12.
Close the ink cartridge access door, and check if the error message has gone away.
13.
If you still receive the error message, turn the product off, and then on again.
Cause: The ink cartridges were not installed properly.
If this did not solve the issue, try the next solution.
Solution 3: Contact HP support
Solution: Contact HP support for service.
Go to: www.hp.com/support .
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: There was a problem with the ink cartridges.
Install cartridges
Solution: Make sure all of the ink cartridges are inserted.
For more information, see:
“Replace the cartridges” on page 46
Cause: One or more of the ink cartridges were not installed.
If this did not solve the issue, try the next solution.
Non-HP cartridge
Solution: Follow the prompts on the display to continue, or replace the indicated ink cartridges.
CAUTION: HP recommends that you do not remove an ink cartridge until a replacement is ready to install.
Errors 89
Chapter 12
HP recommends that you use genuine HP ink cartridges. Genuine HP ink cartridges are designed and tested with HP printers to help you easily produce great results, time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Printer service or repairs required as a result of using a non-HP supply will not be covered under warranty.
If you believe you purchased genuine HP ink cartridges, go to: www.hp.com/go/anticounterfeit
For more information, see:
“Replace the cartridges” on page 46
Cause: The product detected non-HP ink.
Original HP ink depleted
Solution: Follow the prompts on the display to continue, or replace the indicated ink cartridges.
Check the print quality of the current print job. If it is not satisfactory, try cleaning the printhead to see if that improves the quality.
Information about ink levels will not be available.
CAUTION: HP recommends that you do not remove an ink cartridge until a replacement is ready to install.
HP recommends that you use genuine HP ink cartridges. Genuine HP ink cartridges are designed and tested with HP printers to help you easily produce great results, time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Printer service or repairs required as a result of using a non-HP supply will not be covered under warranty.
If you believe you purchased genuine HP ink cartridges, go to: www.hp.com/go/anticounterfeit
For more information, see:
“Replace the cartridges” on page 46
Cause: The original HP ink in the indicated ink cartridges was depleted.
90 Solve a problem
Previously used genuine HP cartridge
Solution: Check the print quality of the current print job. If it is not satisfactory, try cleaning the printhead to see if that improves the quality.
To clean the printhead from the HP Photosmart Software
1.
Load letter, A4, or legal unused plain white paper into the paper tray.
2.
In the HP Solution Center, click Settings .
3.
In the Print Settings area, click Printer Toolbox .
NOTE: You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Features tab, and then click Printer Services .
The Printer Toolbox appears.
4.
Click the Device Services tab.
5.
Click Clean the printhead .
6.
Follow the prompts until you are satisfied with the quality of the output, and then click Done .
There are two stages of cleaning. Each stage lasts about two minutes, uses one sheet of paper, and uses an increasing amount of ink. After each stage, review the quality of the printed page. You should only initiate the next phase of cleaning if the print quality is poor.
If print quality still seems poor after you complete both stages of cleaning, try aligning the printer. If print quality problems persist after cleaning and aligning, contact HP support.
Follow the prompts on the display or computer screen to continue.
NOTE: HP recommends that you do not leave the ink cartridge outside of the printer for an extended period of time. If a used cartridge is installed, check the print quality. If it is not satisfactory, run the cleaning procedure from the toolbox.
Cause: The genuine HP ink cartridge was previously used in some other product.
Printhead problem
Try the following solutions.
•
Solution 1: Reinstall the printhead
•
Solution 2: Contact HP support
Solution 1: Reinstall the printhead
Solution: Check to make sure the printhead is installed and the ink cartridge access door is closed.
Reinstall the printhead.
To reinstall the printhead
1.
Make sure that the product is turned on.
2.
Open the ink cartridge door.
Errors 91
Chapter 12
3.
Remove all of the ink cartridges and place them on a piece of paper with the ink opening pointing up.
4.
Lift the latch handle on the print carriage until it stops.
5.
Remove the printhead by lifting it straight up.
92 Solve a problem
6.
Clean the printhead.
There are three areas of the printhead that need to be cleaned: the plastic ramps on both sides of the ink nozzles, the edge between the nozzles and the electrical contacts, and the electrical contacts.
1 Plastic ramps on the sides of the nozzles
2 Edge between nozzles and contacts
3 Electrical contacts
CAUTION: Touch the nozzle and the electrical contact areas only with cleaning materials and not with your finger.
To clean the printhead a . Lightly dampen a clean, lint-free cloth and wipe the electrical contact area from the bottom to the top. Do not go past the edge between the nozzles and the electrical contacts. Clean until no new ink shows on the cloth.
Errors 93
Chapter 12 b . Use a fresh, lightly dampened, lint-free cloth to wipe any accumulated ink and debris from the edge between the nozzles and the contacts.
c . Use a fresh, lightly dampened, lint-free cloth to wipe the plastic ramps on both sides of the nozzles. Wipe away from the nozzles.
94 d . Wipe the previously cleaned areas dry with a dry lint-free cloth before proceeding to the next step.
7.
Clean the electrical contacts inside the product.
To clean the electrical contacts in the product a . Lightly dampen a clean, lint-free cloth with bottled or distilled water.
b . Clean the electrical contacts in the product by wiping with the cloth from top to bottom. Use as many fresh, clean cloths as necessary. Clean until no ink shows on the cloth.
Solve a problem
c . Wipe the area dry with a dry lint-free cloth before proceeding to the next step.
8.
Make sure the latch handle is raised, and then reinsert the printhead.
9.
Carefully lower the latch handle.
NOTE: Make sure you lower the latch handle before reinserting the ink cartridges. Leaving the latch handle raised can result in incorrectly seated ink cartridges and problems printing. The latch must remain down in order to correctly install the ink cartridges.
10.
Using the colored shaped icons for help, slide the ink cartridge into the empty slot until it clicks into place and is seated firmly in the slot.
Errors 95
Chapter 12
11.
Close the ink cartridge door.
Cause: There was a problem with the printhead.
If this did not solve the issue, try the next solution.
Solution 2: Contact HP support
Solution: Contact HP support for service.
Go to: www.hp.com/support .
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: There was a problem with the printhead.
Problem with printer preparation
Solution: Check the print quality of the current print job. If it is not satisfactory, it could mean the internal clock failed and the product was not able to service the printhead as scheduled. Try cleaning the printhead to see if that improves the quality.
To clean the printhead from the HP Photosmart Software
1.
Load letter, A4, or legal unused plain white paper into the paper tray.
2.
In the HP Solution Center, click Settings .
3.
In the Print Settings area, click Printer Toolbox .
NOTE: You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Features tab, and then click Printer Services .
The Printer Toolbox appears.
4.
Click the Device Services tab.
96 Solve a problem
5.
Click Clean the printhead .
6.
Follow the prompts until you are satisfied with the quality of the output, and then click Done .
There are two stages of cleaning. Each stage lasts about two minutes, uses one sheet of paper, and uses an increasing amount of ink. After each stage, review the quality of the printed page. You should only initiate the next phase of cleaning if the print quality is poor.
If print quality still seems poor after you complete both stages of cleaning, try aligning the printer. If print quality problems persist after cleaning and aligning, contact HP support.
Cause: The product was turned off improperly.
Errors 97
Chapter 12
98 Solve a problem
13 Stop the current job
To stop a current job from the product
▲ Press Cancel on the control panel. If the current job does not stop, press Cancel again.
It can take a few moments for the current job to be cancelled.
Stop the current job 99
Chapter 13
100 Stop the current job
14 Technical information
The technical specifications and international regulatory information for the HP Photosmart are provided in this section.
For additional specifications, see the printed documentation that came with the HP Photosmart.
This section contains the following topics:
•
•
•
•
Environmental product stewardship program
•
•
Regulatory wireless statements
Notice
Hewlett-Packard Company notices
The information contained in this document is subject to change without notice.
All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
© 2009 Hewlett-Packard Development Company, L.P.
Windows, Windows 2000, and Windows XP are U.S. registered trademarks of Microsoft Corporation.
Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Cartridge chip information
The HP cartridges used with this product contain a memory chip that assists in the operation of the product. In addition, this memory chip collects a limited set of information about the usage of the product, which might include the following: the date when the cartridge was first installed, the date when the cartridge was last used, the number of pages printed using the cartridge, the page coverage, the printing modes used, any printing errors that might have occurred, and the product model. This information helps HP design future products to meet our customers printing needs.
The data collected from the cartridge memory chip does not contain information that can be used to identify a customer or user of the cartridge or their product.
HP collects a sampling of the memory chips from cartridges returned to HP's free return and recycling program (HP Planet Partners: www.hp.com/hpinfo/globalcitizenship/environment/recycle/ ). The memory chips from this sampling are read and studied in order to improve future HP products. HP partners who assist in recycling this cartridge might have access to this data, as well.
Any third party possessing the cartridge might have access to the anonymous information on the memory chip. If you prefer to not allow access to this information, you can render the chip inoperable.
However, after you render the memory chip inoperable, the cartridge cannot be used in an HP product.
If you are concerned about providing this anonymous information, you can make this information inaccessible by turning off the memory chip's ability to collect the product's usage information.
Technical information 101
Chapter 14
To disable the usage information function
1.
Press the button next to Copy on the Home screen.
The Copy Menu appears.
2.
Press the top-right, middle-left, and bottom-left buttons in sequence.
3.
Press the button next to Acumen Opt-Out .
4.
Press OK .
NOTE: To re-enable the usage information function, restore the factory defaults.
NOTE: You can continue to use the cartridge in the HP product if you turn off the memory chip's ability to collect the product's usage information.
Specifications
Technical specifications for the HP Photosmart are provided in this section. For complete product specifications, see the Product Data Sheet at www.hp.com/support .
System requirements
Software and system requirements are located in the Readme file.
For information about future operating system releases and support, visit the HP online support Web site at www.hp.com/support .
Environmental specifications
• Recommended operating temperature range: 15 ºC to 32 ºC (59 ºF to 90 ºF)
• Allowable operating temperature range: 5 ºC to 40 ºC (41 ºF to 104 ºF)
• Humidity: 20% to 80% RH non-condensing (recommended); 25 ºC maximum dewpoint
• Non-operating (Storage) temperature range: -40 ºC to 60 ºC (-40 ºF to 140 ºF)
• In the presence of high electromagnetic fields, it is possible the output from the HP Photosmart may be slightly distorted
• HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fields
Paper specifications
Type
Plain paper
Legal paper
Index cards
Hagaki cards
Envelopes
5 x 7 inch (13 x 18 cm) Photo paper
4 x 6 inch (10 x 15 cm) Photo paper
8.5 x 11 inch (216 x 279 mm) Photo paper
* Maximum capacity.
Paper weight
Up to 20 lb. (up to 75 gsm)
Up to 20 lb. (up to 75 gsm)
110 lb. index max (200 gsm)
110 lb. index max (200 gsm)
20 to 24 lb. (75 to 90 gsm)
145 lb.
(236 gsm)
145 lb.
(236 gsm)
145 lb.
(236 gsm)
Up to 125 (20 lb. paper)
Up to 125 (20 lb. paper)
Up to 40
Up to 40
Up to 15
Up to 40
Up to 40
Up to 40
102 Technical information
NOTE: For a complete list of supported media sizes, see the printer driver.
Print specifications
• Print speeds vary according to the complexity of the document
• Panorama-size printing
• Method: drop-on-demand thermal inkjet
• Language: PCL3 GUI
Scan specifications
• Image editor included
• Twain-compliant software interface
• Resolution: up to 1200 x 2400 ppi optical; 19200 ppi enhanced (software)
For more information about ppi resolution, see the scanner software.
• Color: 48-bit color, 8-bit grayscale (256 levels of gray)
• Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)
Copy specifications
• Digital image processing
• Maximum number of copies varies by model
• Copy speeds vary according to the complexity of the document and model
• Maximum copy enlargement ranging from 200-400% (depends on model)
• Maximum copy reduction ranging from 25-50% (depends on model)
Print resolution
To find out about the printer resolution, see the printer software. For more information, see
“View the print resolution” on page 31 .
Cartridge yield
Visit www.hp.com/go/learnaboutsupplies for more information on estimated cartridge yields.
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner.
Design for recycling has been incorporated into this product. The number of materials has been kept to a minimum while ensuring proper functionality and reliability. Dissimilar materials have been designed to separate easily. Fasteners and other connections are easy to locate, access, and remove using common tools. High priority parts have been designed to access quickly for efficient disassembly and repair.
For more information, visit HP’s Commitment to the Environment Web site at: www.hp.com/hpinfo/globalcitizenship/environment/index.html
This section contains the following topics:
•
•
•
•
•
•
HP inkjet supplies recycling program
•
•
Disposal of waste equipment by users in private households in the European Union
•
Environmental product stewardship program 103
Chapter 14
•
Battery disposal in the Netherlands
•
•
•
Eco-Tips
HP is committed to helping customers reduce their environmental footprint. HP has provided the
Eco-Tips below to help you focus on ways to assess and reduce the impact of your printing choices.
In addition to specific features in this product, please visit the HP Eco Solutions web site for more information on HP’s environmental initiatives.
www.hp.com/hpinfo/globalcitizenship/environment/
Your product's Eco features
• Smart Web printing : The HP Smart Web Printing interface includes a Clip Book and Edit
Clips window where you can store, organize, or print clips you have gathered from the Web.
For more information, see “Print a Web page” on page 29 .
• Energy Savings information : To determine the ENERGY STAR® qualification status for this product, see
“Power consumption” on page 104 .
• Recycled Materials : For more information regarding recycling of HP products, please visit: www.hp.com/hpinfo/globalcitizenship/environment/recycle/
Paper use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of product life.
Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP Web site at: www.hp.com/go/msds
Recycling program
HP offers an increasing number of product return and recycling programs in many countries/regions, and partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by reselling some of its most popular products. For more information regarding recycling of HP products, please visit: www.hp.com/hpinfo/globalcitizenship/environment/recycle/
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is available in many countries/regions, and lets you recycle used print cartridges and ink cartridges free of charge. For more information, go to the following Web site: www.hp.com/hpinfo/globalcitizenship/environment/recycle/
Power consumption
Power usage drops significantly while in Sleep mode, which saves natural resources and saves money without affecting the high performance of this product. To determine the ENERGY STAR® qualification status for this product see the Product Data Sheet or Specifications Sheet. Qualified products are also listed at www.hp.com/go/energystar .
104 Technical information
Disposal of waste equipment by users in private households in the European Union
Disposal of Waste Equipment by Users in Private Households in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Évacuation des équipements usagés par les utilisateurs dans les foyers privés au sein de l'Union européenne
La présence de ce symbole sur le produit ou sur son emballage indique que vous ne pouvez pas vous débarrasser de ce produit de la même façon que vos déchets courants.
Au contraire, vous êtes responsable de l'évacuation de vos équipements usagés et, à cet effet, vous êtes tenu de les remettre à un point de collecte agréé pour le recyclage des
équipements électriques et électroniques usagés. Le tri, l'évacuation et le recyclage séparés de vos équipements usagés permettent de préserver les ressources naturelles et de s'assurer que ces équipements sont recyclés dans le respect de la santé humaine et de l'environnement. Pour plus d'informations sur les lieux de collecte des équipements usagés, veuillez contacter votre mairie, votre service de traitement des déchets ménagers ou le magasin où vous avez acheté le produit.
Entsorgung von Elektrogeräten durch Benutzer in privaten Haushalten in der EU
Dieses Symbol auf dem Produkt oder dessen Verpackung gibt an, dass das Produkt nicht zusammen mit dem Restmüll entsorgt werden darf. Es obliegt daher Ihrer Verantwortung, das
Gerät an einer entsprechenden Stelle für die Entsorgung oder Wiederverwertung von Elektrogeräten aller Art abzugeben (z.B. ein Wertstoffhof). Die separate Sammlung und das
Recyceln Ihrer alten Elektrogeräte zum Zeitpunkt ihrer Entsorgung trägt zum Schutz der Umwelt bei und gewährleistet, dass sie auf eine Art und Weise recycelt werden, die keine
Gefährdung für die Gesundheit des Menschen und der Umwelt darstellt. Weitere Informationen darüber, wo Sie alte Elektrogeräte zum Recyceln abgeben können, erhalten Sie bei den örtlichen Behörden, Wertstoffhöfen oder dort, wo Sie das Gerät erworben haben.
Smaltimento di apparecchiature da rottamare da parte di privati nell'Unione Europea
Questo simbolo che appare sul prodotto o sulla confezione indica che il prodotto non deve essere smaltito assieme agli altri rifiuti domestici. Gli utenti devono provvedere allo smaltimento delle apparecchiature da rottamare portandole al luogo di raccolta indicato per il riciclaggio delle apparecchiature elettriche ed elettroniche. La raccolta e il riciclaggio separati delle apparecchiature da rottamare in fase di smaltimento favoriscono la conservazione delle risorse naturali e garantiscono che tali apparecchiature vengano rottamate nel rispetto dell'ambiente e della tutela della salute. Per ulteriori informazioni sui punti di raccolta delle apparecchiature da rottamare, contattare il proprio comune di residenza, il servizio di smaltimento dei rifiuti locale o il negozio presso il quale è stato acquistato il prodotto.
Eliminación de residuos de aparatos eléctricos y electrónicos por parte de usuarios domésticos en la Unión Europea
Este símbolo en el producto o en el embalaje indica que no se puede desechar el producto junto con los residuos domésticos. Por el contrario, si debe eliminar este tipo de residuo, es responsabilidad del usuario entregarlo en un punto de recogida designado de reciclado de aparatos electrónicos y eléctricos. El reciclaje y la recogida por separado de estos residuos en el momento de la eliminación ayudará a preservar recursos naturales y a garantizar que el reciclaje proteja la salud y el medio ambiente. Si desea información adicional sobre los lugares donde puede dejar estos residuos para su reciclado, póngase en contacto con las autoridades locales de su ciudad, con el servicio de gestión de residuos domésticos o con la tienda donde adquirió el producto.
Likvidace vysloužilého zařízení uživateli v domácnosti v zemích EU
Tato značka na produktu nebo na jeho obalu označuje, že tento produkt nesmí být likvidován prostým vyhozením do běžného domovního odpadu. Odpovídáte za to, že vysloužilé zařízení bude předáno k likvidaci do stanovených sběrných míst určených k recyklaci vysloužilých elektrických a elektronických zařízení. Likvidace vysloužilého zařízení samostatným sběrem a recyklací napomáhá zachování přírodních zdrojů a zajišťuje, že recyklace proběhne způsobem chránícím lidské zdraví a životní prostředí. Další informace o tom, kam můžete vysloužilé zařízení předat k recyklaci, můžete získat od úřadů místní samosprávy, od společnosti provádějící svoz a likvidaci domovního odpadu nebo v obchodě, kde jste produkt zakoupili.
Bortskaffelse af affaldsudstyr for brugere i private husholdninger i EU
Dette symbol på produktet eller på dets emballage indikerer, at produktet ikke må bortskaffes sammen med andet husholdningsaffald. I stedet er det dit ansvar at bortskaffe affaldsudstyr ved at aflevere det på dertil beregnede indsamlingssteder med henblik på genbrug af elektrisk og elektronisk affaldsudstyr. Den separate indsamling og genbrug af dit affaldsudstyr på tidspunktet for bortskaffelse er med til at bevare naturlige ressourcer og sikre, at genbrug finder sted på en måde, der beskytter menneskers helbred samt miljøet. Hvis du vil vide mere om, hvor du kan aflevere dit affaldsudstyr til genbrug, kan du kontakte kommunen, det lokale renovationsvæsen eller den forretning, hvor du købte produktet.
Afvoer van afgedankte apparatuur door gebruikers in particuliere huishoudens in de Europese Unie
Dit symbool op het product of de verpakking geeft aan dat dit product niet mag worden afgevoerd met het huishoudelijk afval. Het is uw verantwoordelijkheid uw afgedankte apparatuur af te leveren op een aangewezen inzamelpunt voor de verwerking van afgedankte elektrische en elektronische apparatuur. De gescheiden inzameling en verwerking van uw afgedankte apparatuur draagt bij tot het sparen van natuurlijke bronnen en tot het hergebruik van materiaal op een wijze die de volksgezondheid en het milieu beschermt. Voor meer informatie over waar u uw afgedankte apparatuur kunt inleveren voor recycling kunt u contact opnemen met het gemeentehuis in uw woonplaats, de reinigingsdienst of de winkel waar u het product hebt aangeschaft.
Eramajapidamistes kasutuselt kõrvaldatavate seadmete käitlemine Euroopa Liidus
Kui tootel või toote pakendil on see sümbol, ei tohi seda toodet visata olmejäätmete hulka. Teie kohus on viia tarbetuks muutunud seade selleks ettenähtud elektri- ja elektroonikaseadmete utiliseerimiskohta. Utiliseeritavate seadmete eraldi kogumine ja käitlemine aitab säästa loodusvarasid ning tagada, et käitlemine toimub inimeste tervisele ja keskkonnale ohutult.
Lisateavet selle kohta, kuhu saate utiliseeritava seadme käitlemiseks viia, saate küsida kohalikust omavalitsusest, olmejäätmete utiliseerimispunktist või kauplusest, kust te seadme ostsite.
Hävitettävien laitteiden käsittely kotitalouksissa Euroopan unionin alueella
Tämä tuotteessa tai sen pakkauksessa oleva merkintä osoittaa, että tuotetta ei saa hävittää talousjätteiden mukana. Käyttäjän velvollisuus on huolehtia siitä, että hävitettävä laite toimitetaan sähkö- ja elektroniikkalaiteromun keräyspisteeseen. Hävitettävien laitteiden erillinen keräys ja kierrätys säästää luonnonvaroja. Näin toimimalla varmistetaan myös, että kierrätys tapahtuu tavalla, joka suojelee ihmisten terveyttä ja ympäristöä. Saat tarvittaessa lisätietoja jätteiden kierrätyspaikoista paikallisilta viranomaisilta, jäteyhtiöiltä tai tuotteen jälleenmyyjältä.
Απόρριψη άχρηστων συσκευών στην Ευρωπαϊκή Ένωση
Το παρόν σύμβολο στον εξοπλισμό ή στη συσκευασία του υποδεικνύει ότι το προϊόν αυτό δεν πρέπει να πεταχτεί μαζί με άλλα οικιακά απορρίμματα. Αντίθετα, ευθύνη σας είναι να
απορρίψετε τις άχρηστες συσκευές σε μια καθορισμένη μονάδα συλλογής απορριμμάτων για την ανακύκλωση άχρηστου ηλεκτρικού και ηλεκτρονικού εξοπλισμού. Η χωριστή συλλογή και
ανακύκλωση των άχρηστων συσκευών θα συμβάλει στη διατήρηση των φυσικών πόρων και στη διασφάλιση ότι θα ανακυκλωθούν με τέτοιον τρόπο, ώστε να προστατεύεται η υγεία των
ανθρώπων και το περιβάλλον. Για περισσότερες πληροφορίες σχετικά με το πού μπορείτε να απορρίψετε τις άχρηστες συσκευές για ανακύκλωση, επικοινωνήστε με τις κατά τόπους αρμόδιες
αρχές ή με το κατάστημα από το οποίο αγοράσατε το προϊόν.
A hulladékanyagok kezelése a magánháztartásokban az Európai Unióban
Ez a szimbólum, amely a terméken vagy annak csomagolásán van feltüntetve, azt jelzi, hogy a termék nem kezelhető együtt az egyéb háztartási hulladékkal. Az Ön feladata, hogy a készülék hulladékanyagait eljuttassa olyan kijelölt gyűjtőhelyre, amely az elektromos hulladékanyagok és az elektronikus berendezések újrahasznosításával foglalkozik.
A hulladékanyagok elkülönített gyűjtése és újrahasznosítása hozzájárul a természeti erőforrások megőrzéséhez, egyúttal azt is biztosítja, hogy a hulladék újrahasznosítása az egészségre és a környezetre nem ártalmas módon történik. Ha tájékoztatást szeretne kapni azokról a helyekről, ahol leadhatja újrahasznosításra a hulladékanyagokat, forduljon a helyi önkormányzathoz, a háztartási hulladék begyűjtésével foglalkozó vállalathoz vagy a termék forgalmazójához.
Lietotāju atbrīvošanās no nederīgām ierīcēm Eiropas Savienības privātajās mājsaimniecībās
Šis simbols uz ierīces vai tās iepakojuma norāda, ka šo ierīci nedrīkst izmest kopā ar pārējiem mājsaimniecības atkritumiem. Jūs esat atbildīgs par atbrīvošanos no nederīgās ierīces, to nododot norādītajā savākšanas vietā, lai tiktu veikta nederīgā elektriskā un elektroniskā aprīkojuma otrreizējā pārstrāde. Speciāla nederīgās ierīces savākšana un otrreizējā pārstrāde palīdz taupīt dabas resursus un nodrošina tādu otrreizējo pārstrādi, kas sargā cilvēku veselību un apkārtējo vidi. Lai iegūtu papildu informāciju par to, kur otrreizējai pārstrādei var nogādāt nederīgo ierīci, lūdzu, sazinieties ar vietējo pašvaldību, mājsaimniecības atkritumu savākšanas dienestu vai veikalu, kurā iegādājāties šo ierīci.
Europos Sąjungos vartotojų ir privačių namų ūkių atliekamos įrangos išmetimas
Šis simbolis ant produkto arba jo pakuotės nurodo, kad produktas negali būti išmestas kartu su kitomis namų ūkio atliekomis. Jūs privalote išmesti savo atliekamą įrangą atiduodami ją į atliekamos elektronikos ir elektros įrangos perdirbimo punktus. Jei atliekama įranga bus atskirai surenkama ir perdirbama, bus išsaugomi natūralūs ištekliai ir užtikrinama, kad įranga yra perdirbta žmogaus sveikatą ir gamtą tausojančiu būdu. Dėl informacijos apie tai, kur galite išmesti atliekamą perdirbti skirtą įrangą kreipkitės į atitinkamą vietos tarnybą, namų ūkio atliekų išvežimo tarnybą arba į parduotuvę, kurioje pirkote produktą.
Utylizacja zużytego sprzętu przez użytkowników domowych w Unii Europejskiej
Symbol ten umieszczony na produkcie lub opakowaniu oznacza, że tego produktu nie należy wyrzucać razem z innymi odpadami domowymi. Użytkownik jest odpowiedzialny za dostarczenie zużytego sprzętu do wyznaczonego punktu gromadzenia zużytych urządzeń elektrycznych i elektronicznych. Gromadzenie osobno i recykling tego typu odpadów przyczynia się do ochrony zasobów naturalnych i jest bezpieczny dla zdrowia i środowiska naturalnego. Dalsze informacje na temat sposobu utylizacji zużytych urządzeń można uzyskać u odpowiednich władz lokalnych, w przedsiębiorstwie zajmującym się usuwaniem odpadów lub w miejscu zakupu produktu.
Descarte de equipamentos por usuários em residências da União Européia
Este símbolo no produto ou na embalagem indica que o produto não pode ser descartado junto com o lixo doméstico. No entanto, é sua responsabilidade levar os equipamentos a serem descartados a um ponto de coleta designado para a reciclagem de equipamentos eletro-eletrônicos. A coleta separada e a reciclagem dos equipamentos no momento do descarte ajudam na conservação dos recursos naturais e garantem que os equipamentos serão reciclados de forma a proteger a saúde das pessoas e o meio ambiente. Para obter mais informações sobre onde descartar equipamentos para reciclagem, entre em contato com o escritório local de sua cidade, o serviço de limpeza pública de seu bairro ou a loja em que adquiriu o produto.
Postup používateľov v krajinách Európskej únie pri vyhadzovaní zariadenia v domácom používaní do odpadu
Tento symbol na produkte alebo na jeho obale znamená, že nesmie by vyhodený s iným komunálnym odpadom. Namiesto toho máte povinnos odovzda toto zariadenie na zbernom mieste, kde sa zabezpečuje recyklácia elektrických a elektronických zariadení. Separovaný zber a recyklácia zariadenia určeného na odpad pomôže chráni prírodné zdroje a zabezpečí taký spôsob recyklácie, ktorý bude chráni ľudské zdravie a životné prostredie. Ďalšie informácie o separovanom zbere a recyklácii získate na miestnom obecnom úrade, vo firme zabezpečujúcej zber vášho komunálneho odpadu alebo v predajni, kde ste produkt kúpili.
Ravnanje z odpadno opremo v gospodinjstvih znotraj Evropske unije
Ta znak na izdelku ali embalaži izdelka pomeni, da izdelka ne smete odlagati skupaj z drugimi gospodinjskimi odpadki. Odpadno opremo ste dolžni oddati na določenem zbirnem mestu za recikliranje odpadne električne in elektronske opreme. Z ločenim zbiranjem in recikliranjem odpadne opreme ob odlaganju boste pomagali ohraniti naravne vire in zagotovili, da bo odpadna oprema reciklirana tako, da se varuje zdravje ljudi in okolje. Več informacij o mestih, kjer lahko oddate odpadno opremo za recikliranje, lahko dobite na občini, v komunalnem podjetju ali trgovini, kjer ste izdelek kupili.
Kassering av förbrukningsmaterial, för hem- och privatanvändare i EU
Produkter eller produktförpackningar med den här symbolen får inte kasseras med vanligt hushållsavfall. I stället har du ansvar för att produkten lämnas till en behörig återvinningsstation för hantering av el- och elektronikprodukter. Genom att lämna kasserade produkter till återvinning hjälper du till att bevara våra gemensamma naturresurser. Dessutom skyddas både människor och miljön när produkter återvinns på rätt sätt. Kommunala myndigheter, sophanteringsföretag eller butiken där varan köptes kan ge mer information om var du lämnar kasserade produkter för återvinning.
Chemical Substances
HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No
1907/2006 of the European Parliament and the Council) . A chemical information report for this product can be found at: www.hp.com/go/reach .
Environmental product stewardship program 105
Chapter 14
Battery disposal in the Netherlands
Dit HP Product bevat een lithium-manganese-dioxide batterij. Deze bevindt zich op de hoofdprintplaat.
Wanneer deze batterij leeg is, moet deze volgens de geldende regels worden afgevoerd.
Battery disposal in Taiwan
Attention California users
The battery supplied with this product may contain perchlorate material. Special handling may apply.
For more information, go to the following Web site: www.dtsc.ca.gov/hazardouswaste/perchlorate
106 Technical information
EU battery directive
European Union Battery Directive
This product contains a battery that is used to maintain data integrity of real time clock or product settings and is designed to last the life of the product. Any attempt to service or replace this battery should be performed by a qualified service technician.
Directive sur les batteries de l'Union Européenne
Ce produit contient une batterie qui permet de maintenir l'intégrité des données pour les paramètres du produit ou l'horloge en temps réel et qui a
été conçue pour durer aussi longtemps que le produit. Toute tentative de réparation ou de remplacement de cette batterie doit être effectuée par un technicien qualifié.
Batterie-Richtlinie der Europäischen Union
Dieses Produkt enthält eine Batterie, die dazu dient, die Datenintegrität der Echtzeituhr sowie der Produkteinstellungen zu erhalten, und die für die
Lebensdauer des Produkts ausreicht. Im Bedarfsfall sollte das Instandhalten bzw. Austauschen der Batterie von einem qualifizierten Servicetechniker durchgeführt werden.
Direttiva dell'Unione Europea relativa alla raccolta, al trattamento e allo smaltimento di batterie e accumulatori
Questo prodotto contiene una batteria utilizzata per preservare l'integrità dei dati dell'orologio in tempo reale o delle impostazioni del prodotto e la sua durata si intende pari a quella del prodotto. Eventuali interventi di riparazione o sostituzione della batteria devono essere eseguiti da un tecnico dell'assistenza qualificato.
Directiva sobre baterías de la Unión Europea
Este producto contiene una batería que se utiliza para conservar la integridad de los datos del reloj de tiempo real o la configuración del producto y está diseñada para durar toda la vida útil del producto. El mantenimiento o la sustitución de dicha batería deberá realizarla un técnico de mantenimiento cualificado.
Směrnice Evropské unie pro nakládání s bateriemi
Tento výrobek obsahuje baterii, která slouží k uchování správných dat hodin reálného času nebo nastavení výrobku. Baterie je navržena tak, aby vydržela celou životnost výrobku. Jakýkoliv pokus o opravu nebo výměnu baterie by měl provést kvalifikovaný servisní technik.
EU's batteridirektiv
Produktet indeholder et batteri, som bruges til at vedligeholde dataintegriteten for realtidsur- eller produktindstillinger og er beregnet til at holde i hele produktets levetid. Service på batteriet eller udskiftning bør foretages af en uddannet servicetekniker.
Richtlijn batterijen voor de Europese Unie
Dit product bevat een batterij die wordt gebruikt voor een juiste tijdsaanduiding van de klok en het behoud van de productinstellingen. Bovendien is deze ontworpen om gedurende de levensduur van het product mee te gaan. Het onderhoud of de vervanging van deze batterij moet door een gekwalificeerde onderhoudstechnicus worden uitgevoerd.
Euroopa Liidu aku direktiiv
Toode sisaldab akut, mida kasutatakse reaalaja kella andmeühtsuse või toote sätete säilitamiseks. Aku on valmistatud kestma terve toote kasutusaja.
Akut tohib hooldada või vahetada ainult kvalifitseeritud hooldustehnik.
Euroopan unionin paristodirektiivi
Tämä laite sisältää pariston, jota käytetään reaaliaikaisen kellon tietojen ja laitteen asetusten säilyttämiseen. Pariston on suunniteltu kestävän laitteen koko käyttöiän ajan. Pariston mahdollinen korjaus tai vaihto on jätettävä pätevän huoltohenkilön tehtäväksi.
Οδηγία της Ευρωπαϊκής Ένωσης για τις ηλεκτρικές στήλες
Αυτό το προϊόν περιλαμβάνει μια μπαταρία, η οποία χρησιμοποιείται για τη διατήρηση της ακεραιότητας των δεδομένων ρολογιού πραγματικού
χρόνου ή των ρυθμίσεων προϊόντος και έχει σχεδιαστεί έτσι ώστε να διαρκέσει όσο και το προϊόν. Τυχόν απόπειρες επιδιόρθωσης ή αντικατάστασης
αυτής της μπαταρίας θα πρέπει να πραγματοποιούνται από κατάλληλα εκπαιδευμένο τεχνικό.
Az Európai unió telepek és akkumulátorok direktívája
A termék tartalmaz egy elemet, melynek feladata az, hogy biztosítsa a valós idejű óra vagy a termék beállításainak adatintegritását. Az elem úgy van tervezve, hogy végig kitartson a termék használata során. Az elem bármilyen javítását vagy cseréjét csak képzett szakember végezheti el.
Eiropas Savienības Bateriju direktīva
Produktam ir baterija, ko izmanto reālā laika pulksteņa vai produkta iestatījumu datu integritātes saglabāšanai, un tā ir paredzēta visam produkta dzīves ciklam. Jebkura apkope vai baterijas nomaiņa ir jāveic atbilstoši kvalificētam darbiniekam.
Europos Sąjungos baterijų ir akumuliatorių direktyva
Šiame gaminyje yra baterija, kuri naudojama, kad būtų galima prižiūrėti realaus laiko laikrodžio veikimą arba gaminio nuostatas; ji skirta veikti visą gaminio eksploatavimo laiką. Bet kokius šios baterijos aptarnavimo arba keitimo darbus turi atlikti kvalifikuotas aptarnavimo technikas.
Dyrektywa Unii Europejskiej w sprawie baterii i akumulatorów
Produkt zawiera baterię wykorzystywaną do zachowania integralności danych zegara czasu rzeczywistego lub ustawień produktu, która podtrzymuje działanie produktu. Przegląd lub wymiana baterii powinny być wykonywane wyłącznie przez uprawnionego technika serwisu.
Diretiva sobre baterias da União Européia
Este produto contém uma bateria que é usada para manter a integridade dos dados do relógio em tempo real ou das configurações do produto e
é projetada para ter a mesma duração que este. Qualquer tentativa de consertar ou substituir essa bateria deve ser realizada por um técnico qualificado.
Smernica Európskej únie pre zaobchádzanie s batériami
Tento výrobok obsahuje batériu, ktorá slúži na uchovanie správnych údajov hodín reálneho času alebo nastavení výrobku. Batéria je skonštruovaná tak, aby vydržala celú životnosť výrobku. Akýkoľvek pokus o opravu alebo výmenu batérie by mal vykonať kvalifikovaný servisný technik.
Direktiva Evropske unije o baterijah in akumulatorjih
V tem izdelku je baterija, ki zagotavlja natančnost podatkov ure v realnem času ali nastavitev izdelka v celotni življenjski dobi izdelka. Kakršno koli popravilo ali zamenjavo te baterije lahko izvede le pooblaščeni tehnik.
EU:s batteridirektiv
Produkten innehåller ett batteri som används för att upprätthålla data i realtidsklockan och produktinställningarna. Batteriet ska räcka produktens hela livslängd. Endast kvalificerade servicetekniker får utföra service på batteriet och byta ut det.
Директива за батерии на Европейския съюз
Този продукт съдържа батерия, която се използва за поддържане на целостта на данните на часовника в реално време или настройките за продукта, създадена на издържи през целия живот на продукта. Сервизът или замяната на батерията трябва да се извършва от квалифициран техник.
Directiva Uniunii Europene referitoare la baterii
Acest produs conţine o baterie care este utilizată pentru a menţine integritatea datelor ceasului de timp real sau setărilor produsului şi care este proiectată să funcţioneze pe întreaga durată de viaţă a produsului. Orice lucrare de service sau de înlocuire a acestei baterii trebuie efectuată de un tehnician de service calificat.
Environmental product stewardship program 107
Chapter 14
Regulatory notices
The HP Photosmart meets product requirements from regulatory agencies in your country/region.
This section contains the following topics:
•
Regulatory model identification number
•
•
VCCI (Class B) compliance statement for users in Japan
•
Notice to users in Japan about the power cord
•
•
HP Photosmart Wireless B109 series declaration of conformity
Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SDGOB-0913. This regulatory number should not be confused with the marketing name (HP Photosmart Wireless B109 series, etc.) or product numbers
(Q8444A, etc.).
FCC statement
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the following notice be brought to the attention of users of this product.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
For further information, contact:
Manager of Corporate Product Regulations
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, Ca 94304
(650) 857-1501
Modifications (part 15.21)
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
108 Technical information
VCCI (Class B) compliance statement for users in Japan
Notice to users in Japan about the power cord
Notice to users in Korea
Regulatory notices 109
Chapter 14
HP Photosmart Wireless B109 series declaration of conformity
Regulatory wireless statements
This section contains the following regulatory information pertaining to wireless products:
•
Exposure to radio frequency radiation
•
•
110 Technical information
•
European Union regulatory notice
•
Exposure to radio frequency radiation
Exposure to radio frequency radiation
Caution The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. This product and any attached external antenna, if supported, shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation.
Notice to users in Brazil
Aviso aos usuários no Brasil
Este equipamento opera em caráter secundário, isto é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. (Res.ANATEL 282/2001).
Notice to users in Canada
Notice to users in Canada/Note à l'attention des utilisateurs canadiens
For Indoor Use. This digital apparatus does not exceed the Class B limits for radio noise emissions from the digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications. The internal wireless radio complies with RSS
210 and RSS GEN of Industry Canada.
Utiliser à l'intérieur. Le présent appareil numérique n'émet pas de bruit radioélectrique dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada. Le composant RF interne est conforme a la norme RSS-210 and RSS GEN d'Industrie Canada.
Regulatory wireless statements 111
Chapter 14
European Union regulatory notice
European Union Regulatory Notice
Products bearing the CE marking comply with the following EU Directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
CE compliance of this product is valid only if powered with the correct CE-marked AC adapter provided by HP.
If this product has telecommunications functionality, it also complies with the essential requirements of the following EU Directive:
• R&TTE Directive 1999/5/EC
Compliance with these directives implies conformity to harmonized European standards
(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family. This compliance is indicated by the following conformity marking placed on the product.
The wireless telecommunications functionality of this product may be used in the following
EU and EFTA countries:
Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Products with 2.4-GHz wireless LAN devices
France
For 2.4 GHz Wireless LAN operation of this product certain restrictions apply: This product may be used indoor for the entire 2400-2483.5 MHz frequency band (channels
1-13). For outdoor use, only 2400-2454 MHz frequency band (channels 1-9) may be used.
For the latest requirements, see http://www.art-telecom.fr.
Italy
License required for use. Verify with your dealer or directly with the General Direction for
Frequency Planning and Management (Direzione Generale Pianificazione e Gestione
Frequenze).
112 Technical information
Notice to users in Taiwan
Regulatory wireless statements 113
Chapter 14
114 Technical information
Index
Symbols/Numerics
10 x 15 cm photo paper
A
B
C
connection problems
HP All-in-One will not turn
connection types supported
control panel
copy
crop
customer support
D
display
E
encryption
envelopes
environment
Environmental product
environmental
error messages
F
file
invalid name 73 supported formats 73
I
ink
ink cartridges
L
labels
legal paper
letter paper
M
maintenance
diagnostic page 49 print quality report 49
memory cards
HP Photosmartcannot
missing
N
network
P
paper
phone support period
photo paper
photos
diagnostic page 49 print quality report 49
print settings
printer found screen,
printer sharing
printhead
problems
115
R
recycle
regulatory notices regulatory model
reports
diagnostic 49 print quality 49
S
scan
text appears as dotted
lines 67 text format incorrect 67
security
network, WEP key 8, 9 troubleshoot 8
software installation
T
technical information
environmental
specifications 102 paper specifications 102
print specifications 103 scan specifications 103
text
dotted lines on scan 67 incorrect format on scan 67
incorrect or missing on
transparencies
troubleshoot
troubleshooting
U
W
116
advertisement
Key Features
- Wireless connectivity for easy printing from your computer, smartphone, or other devices
- User-friendly control panel for quick and easy operation
- Variety of printing options to meet your specific requirements
- High-quality photo printing for vibrant and long-lasting results
- Sharp text document printing for professional-looking documents
- Everyday copying for quick and convenient copying tasks
Related manuals
Frequently Answers and Questions
How do I connect the HP PHOTOSMART B109N to my computer?
How do I print a document?
How do I scan a document?
Can the HP B109 printer print envelopes?
advertisement
Table of contents
- 4 Contents
- 6 HP Photosmart Wireless B109 series Help
- 8 Finish setting up the HP Photosmart
- 8 Add the HP Photosmart to a network
- 12 Install the software for a network connection
- 13 Set up a USB connection
- 14 Get to know the HP Photosmart
- 14 Printer parts
- 15 Control panel features
- 16 How do I?
- 24 Print
- 24 Print documents
- 25 Print photos
- 31 Print envelopes
- 31 Print on specialty media
- 32 Print a Web page
- 36 Scan
- 36 Scan to a computer
- 37 Scan to a memory card
- 40 Copy
- 40 Copy text or mixed documents
- 44 Reprint photos
- 46 Save photos
- 48 Maintain the HP Photosmart
- 48 Check the estimated ink levels
- 49 Replace the cartridges
- 51 Order ink supplies
- 51 Cartridge warranty information
- 52 Print and evaluate a print quality report
- 56 Solve a problem
- 56 HP support
- 56 HP support by phone
- 56 Phone support period
- 56 Placing a call
- 57 After the phone support period
- 57 Additional warranty options
- 57 Setup troubleshooting
- 58 The product will not turn on
- 60 After setting up the product, it does not print
- 62 Uninstall and reinstall the software
- 63 Print troubleshooting
- 64 Check cartridges
- 64 Check paper
- 65 Check product
- 68 Print quality troubleshooting
- 68 Memory card troubleshooting
- 68 The product does not read the memory card
- 69 The photos on the memory card do not transfer to my computer
- 70 Scan troubleshooting
- 71 Text is incorrect or missing
- 71 Copy troubleshooting
- 72 Resize to Fit is not working as expected
- 72 Errors
- 72 Product messages
- 73 Missing HP Photosmart Software
- 74 File messages
- 75 Photos not found
- 76 Supported file types for the product
- 76 File corrupted
- 76 General user messages
- 77 Memory card error
- 77 Cannot crop
- 79 Paper messages
- 80 Ink cartridge and printhead messages
- 81 General printer error
- 81 Incompatible ink cartridges
- 83 Ink cartridge problem
- 89 Check ink cartridges
- 94 Printhead problem
- 104 Technical information
- 104 Notice
- 104 Cartridge chip information
- 105 Specifications
- 106 Environmental product stewardship program
- 107 Eco-Tips
- 107 Paper use
- 107 Plastics
- 107 Material safety data sheets
- 107 Recycling program
- 107 HP inkjet supplies recycling program
- 107 Power consumption
- 108 Disposal of waste equipment by users in private households in the European Union
- 108 Chemical Substances
- 109 Battery disposal in the Netherlands
- 109 Battery disposal in Taiwan
- 109 Attention California users
- 110 EU battery directive
- 111 Regulatory notices
- 111 Regulatory model identification number
- 111 FCC statement
- 112 VCCI (Class B) compliance statement for users in Japan
- 112 Notice to users in Japan about the power cord
- 112 Notice to users in Korea
- 113 HP Photosmart Wireless B109 series declaration of conformity
- 113 Regulatory wireless statements
- 114 Exposure to radio frequency radiation
- 114 Notice to users in Brazil
- 114 Notice to users in Canada
- 115 European Union regulatory notice
- 116 Notice to users in Taiwan
- 118 Index