Sportsman 803792 Earth Series 19-Ton 212 cc Gas Kinetic Log Splitter Replacement Part List

Below you will find brief information for KSPLIT19. This manual provides detailed instructions on the parts of the log splitter, including the body, wood cradle, engine, and operating handles. It also details engine specifications like displacement, maximum power, and fuel consumption, along with fuel line installation instructions.

PDF
Document
KSPLIT19 Log Splitter Instruction Manual | AI Chat & PDF Download | Manualzz

Advertisement

Advertisement

KSPLIT19 GASOLINE POWERED KINETIC LOG SPLITTER INSTRUCTION MANUAL 19
PARTS DIAGRAM
KSPLIT19 GASOLINE POWERED KINETIC LOG SPLITTER INSTRUCTION MANUAL 20
PARTS LIST
No Description Qty No. Description Qty
1 Body 1 40 Cross recessed bolt M6x10 1
2 Wood Cradle 2 41 Operate handle 1
3 Hex Bolt M6x30 4 42 Operate hanle press block 1
4 Flat Washer 6 9 43 Lock-unlock handle 1
5 Damping rubber block 2 44 Hex Bolt M14x140 1
6 Spline 1 45 Hex Bolt M12X60 1
7 Bearing housing 2 46 Hex Bolt M10x75 -full 1
8 Flat washer 10 21 47 Safe Block 1
9 Spring washer M10 16 48 Engine 1
10 Hex Bolt M10x25 9 49 Engine sitting block 2
11 Flywheel 1 50 Engine support 1
12 Flywheel Guard 1 51 Pulley Guard setting block 1
13 Hex Bolt M6x12 3 52 Hex bolt M6x16 2
14 Hex Bolt M10x30 8 53 Tension Spring 2
15 Wide flat washer 6 5 54 Safe cover plate 1
16 Flat Head Hex bolt M6x12 5 55 V belt flywheel guard 1
17 Hex Bolt M12x45 6 56 Hex Bolt M8x25 19
18 Flat washer 12 14 57 Wide flat washer 8x30x3 3
19 Rack reset spring 1 58 V belt -flywheel 1
20 Lock nut M12 8 59 V belt- flywheel to engine 1
21 Hex nut M10 1 60 Wide flat washer 16 4
22 Rack 1 61 Wheel 2
23 Restoration Device 1 62 Cotter pin 2
24 Flat washer 8 34 63 Wheel bracket 1
25 Lock nut M8 16 64 Lock nut M6 4
26 Hex bolt M12X70 1 65 Pulling pin 1
27 Spring washer M8 6 66 R pin 1
28 Hex Bolt M10X70 1 67 Hex bolt M8x30 2
29 Bearing 609-2Z 2 68 Wood plate 1
30 Lock nut M10 5 69 Carry handle 1
31 Pusher head 1 70 Front foot 1
32 Track slab 2 71 Hex bolt M10x100 1
33 Press block 2 72 Hex bolt M12x16 2
34 Lock Nut M14 1 73 Hex bolt M10x90 2
35 Flat washer 14 2 74 Rack’s Side roller housing 2
36 Bushing 1 75 Rack’s side roller 2
37 Roller 1 76 Hex bolt M8x16 4
38 Key 8x7 2 77 V belt 1
39 Lock-Unlock reset spring 1
KSPLIT19 GASOLINE POWERED KINETIC LOG SPLITTER INSTRUCTION MANUAL 21
Engine type 4-stroke, overhead cam
Displacement (cm³) 212
Bore × Stroke(mm) 70×55
Maximum Powerkw/r/min 5.1/3600
Maximum torqueN·m /r/min 14 /2500
Fuel consumption(g/kW.h) 374
Cooling system Forced air
Ignition system TCI
Intake valve clearance (mm)(cold engine) 0.10±0.02 (0.004±0.001 inch)
Exhaust valve clearance (mm)(cold engine) 0.18±0.02 (0.007±0.001 inch)
Fuel line installation instruction (includes the carburetor, the fuel tank, etc.) :
1. Connect clamp to the fuel hose;
2. Slide fuel hose onto connection until it touches the bottom;
3. Secure with clamp.
1 1
2 2
3
3
KSPLIT19 GASOLINE POWERED KINETIC LOG SPLITTER INSTRUCTION MANUAL 22
PARTS LIST
5
6
7
8
9
10
11
/

Advertisement

Key features

  • Gasoline Powered

  • Kinetic Log Splitter

  • 4-Stroke Engine

  • 212 cm³ Displacement

  • Forced Air Cooling

  • TCI Ignition System

Frequently asked questions

The log splitter uses a 4-stroke, overhead cam engine.

The engine displacement is 212 cm³.

The engine has a forced air cooling system.

The engine has a TCI ignition system.

  1. Connect clamp to the fuel hose; 2. Slide fuel hose onto connection until it touches the bottom; 3. Secure with clamp.
Preparing document for printing…
0%