MPC UC010, UC012, UC015, UC015w, UC022, UC022w, UC023w Operating Manual
Show PDF Add to My manuals38 Pages
advertisement
Operating manual
Unichiller in Desktop Housing
14.12.2009
Valid for following versions:
with natural refrigerant, Advanced models, for
models with heating
Valid for:
minichiller, minichiller w
UC006
UC007, UC010
UC012, UC012w
UC015, UC015w
UC022, UC022w
UC023w
UC025, UC025w
UC006Tw, UC009Tw
Unichiller in Desktop Housing
14.12.2009
Valid for following versions:
with natural refrigerant, Advanced models, for
models with heating
Valid for:
minichiller, minichiller w
UC006
UC007, UC010
UC012, UC012w
UC015, UC015w
UC022, UC022w
UC023w
UC025, UC025w
UC006Tw, UC009Tw
2
Contents V1.5/12.09
Foreword ............................................................................................................4
Chapter 1: Safety ................................................................................................5
Description of Safety and Information symbols ........................................................6
Intended Use and General Safety Instructions..........................................................7
Description .........................................................................................................8
Duties of responsible person .................................................................................9
Operator requirements ..........................................................................................9
Machine operator duties .......................................................................................9
Work area ...........................................................................................................9
Safety Devices to DIN12876............................................................................... 10
Environmental Conditions.................................................................................... 11
Operating conditions .......................................................................................... 12
Location ........................................................................................................... 13
Thermofluids ..................................................................................................... 14
Chapter 2 : Electronics and operation ................................................................... 15
Display and operation ......................................................................................... 16
Advanced Functionality ...................................................................................... 16
Chapter 3: Connect the machine, fill and prepare fort he required application ............ 17
Power connection .............................................................................................. 18
Safety instructions ............................................................................................. 18
Start up ............................................................................................................ 18
Freezing protection (only valid for temperature control units with the option freezing
protection) ........................................................................................................ 18
Water-cooling (valid for units with water cooling) .................................................. 19
Connecting an externally closed application........................................................... 20
Switching on the temperature control unit ............................................................ 20
Setting the over-temperature switch..................................................................... 21
Entering a set point ............................................................................................ 21
Starting temperature control................................................................................ 21
Ending temperature control ................................................................................. 21
Filling and air purging an externally closed system ................................................. 22
Draining the machine and an externally closed application....................................... 23
Changing heat transfer fluid / internal cleaning ...................................................... 23
Chapter 4: Interface and software update ............................................................. 24
Data Communication .......................................................................................... 25
Chapter 5: First aid for a fault condition................................................................ 29
Display Error Messages....................................................................................... 30
Alarms and Warnings ......................................................................................... 30
Maintenance ..................................................................................................... 31
Decontamination / Repair .................................................................................... 32
Cleaning the surfaces ......................................................................................... 32
Plug contacts .................................................................................................... 32
Contents V1.5/12.09
Foreword ............................................................................................................4
Chapter 1: Safety ................................................................................................5
Description of Safety and Information symbols ........................................................6
Intended Use and General Safety Instructions..........................................................7
Description .........................................................................................................8
Duties of responsible person .................................................................................9
Operator requirements ..........................................................................................9
Machine operator duties .......................................................................................9
Work area ...........................................................................................................9
Safety Devices to DIN12876............................................................................... 10
Environmental Conditions.................................................................................... 11
Operating conditions .......................................................................................... 12
Location ........................................................................................................... 13
Thermofluids ..................................................................................................... 14
Chapter 2 : Electronics and operation ................................................................... 15
Display and operation ......................................................................................... 16
Advanced Functionality ...................................................................................... 16
Chapter 3: Connect the machine, fill and prepare fort he required application ............ 17
Power connection .............................................................................................. 18
Safety instructions ............................................................................................. 18
Start up ............................................................................................................ 18
Freezing protection (only valid for temperature control units with the option freezing
protection) ........................................................................................................ 18
Water-cooling (valid for units with water cooling) .................................................. 19
Connecting an externally closed application........................................................... 20
Switching on the temperature control unit ............................................................ 20
Setting the over-temperature switch..................................................................... 21
Entering a set point ............................................................................................ 21
Starting temperature control................................................................................ 21
Ending temperature control ................................................................................. 21
Filling and air purging an externally closed system ................................................. 22
Draining the machine and an externally closed application....................................... 23
Changing heat transfer fluid / internal cleaning ...................................................... 23
Chapter 4: Interface and software update ............................................................. 24
Data Communication .......................................................................................... 25
Chapter 5: First aid for a fault condition................................................................ 29
Display Error Messages....................................................................................... 30
Alarms and Warnings ......................................................................................... 30
Maintenance ..................................................................................................... 31
Decontamination / Repair .................................................................................... 32
Cleaning the surfaces ......................................................................................... 32
Plug contacts .................................................................................................... 32
3
Chapter 6: Taking the machine out of service........................................................ 33
Decommissioning............................................................................................... 34
Transport.......................................................................................................... 35
Disposal ........................................................................................................... 35
Chapter 6: Taking the machine out of service........................................................ 33
Decommissioning............................................................................................... 34
Transport.......................................................................................................... 35
Disposal ........................................................................................................... 35
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
advertisement
Key Features
- Advanced functionality with programmer and interface
- Compact design with small footprint
- High cooling capacity of 1.8 kW
- Temperature range from -20 to 120 °C
- Natural refrigerant for environmentally friendly operation
Related manuals
Frequently Answers and Questions
What is the temperature range of the MPC UC015w?
The MPC UC015w has a temperature range from -20 to 120 °C.
What is the cooling capacity of the MPC UC015w?
The MPC UC015w has a cooling capacity of 1.8 kW.
What type of refrigerant does the MPC UC015w use?
The MPC UC015w uses a natural refrigerant for environmentally friendly operation.
advertisement