Thermofluids. MPC UC009Tw, UC006Tw, UC012, UC022, UC015w, UC023w, UC015, UC022w, UC010

Thermofluids

We recommend the thermal fluid shown in our catalogue. The name of a thermal fluid is derived from the working temperature range and the viscosity at 25 °C.

Examples of thermal fluids in our catalogue:

M40.165.10:

• Lower working limit -40 °C

• Upper working limit 165 °C

• Viscosity at 25 °C: 10 mm 2 /s

The data sheet for the thermal fluid used is of utmost importance, and must be read before use. This data sheet should be followed.

• Please note the classification of your machine according to DIN 12876

• The chosen thermal fluid must be compatible with stainless steel 1.4301 (V2A) and FKM!

• The maximum viscosity of the thermal fluid may not exceed 50 mm²/s at the lowest temperature reached!

• The maximum density of the thermal fluid may not exceed 1kg / dm³

• For chillers we recommend as thermal fluid a mixture of water and glycol (a mixture is recommended that permits a temperature down to -25°C).

Information on water quality can be found on our website ( www.huberonline.com

) under "Download / Safety data sheets thermofluids / Characteristics of water".

14