Change the wristband. Fitbit Zip Versa 2, Versa Series, Versa FB505, Versa FB504

Change the wristband

Versa 2 comes with a small wristband attached and an additional large, bottom wristband in the box. Both the top and bottom wristbands can be swapped with accessory wristbands, sold separately on fitbit.com

. For wristband measurements, see

"Wristband size" on page 64

. All Versa series wristbands are compatible with all devices in the Fitbit Versa series.

Remove a wristband

1. Turn over Versa 2 and find the quick-release lever.

2. While pressing the quick-release lever inward, gently pull the wristband away from the watch to release it.

3. Repeat on the other side.

14

Attach a wristband

1. To attach a wristband, hold the band at a 45° angle and slide the pin (the side opposite the quick-release lever) into the notch on the watch.

2. While pressing the quick-release lever inward, slide the other end of the wristband into place.

3. When both ends of the pin are inserted, release the quick-release lever.

15