3.2.3 Main Functions. Vitek VT-TNR3216PF, VT-TNR818PN, VT-TNR818PFN, VT-TNV128E1, VT-TNV6416E1, VT-TNR818P, VT-TNR818PF, VT-TNR6480E1, VT-TNR3216PFN, VT-TNR1646PF
Add to my manuals186 Pages
advertisement
VITEK Industrial Video Products – Transcendent Series NVRs
There are some function items on the left side of the camera management interface. Click each item to go to corresponding interface or window. For instance, click “Add Camera” to pop up the window as shown below.
Click the main menus on the top of the camera management interface to go to corresponding interfaces. Refer to the picture below. For instance, you can go to system setup interface by clicking “System” tag.
3.2.3 Main Functions
Ø
Camera
This module covers the functions such as
Camera Management
(see Chapter 4 Camera
Management for details),
Image Settings
(see 5.4 Preview Image Configuration for details),
Motion
(see 11.2 Motion Alarm for details), and
PTZ
(see Chapter 6 PTZ for details) and so on.
Ø
Record
This module covers the functions such as
Encode Parameters
and
Record Schedule
. Please see
Chapter 7 Record & Disk Management for details.
Ø
AI/Event
This module covers the functions
Smart Event, Combination Alarm, Exception, Sensor and
27
VITEK Industrial Video Products – Transcendent Series NVRs
There are some function items on the left side of the camera management interface. Click each item to go to corresponding interface or window. For instance, click “Add Camera” to pop up the window as shown below.
VITEK Industrial Video Products – Transcendent Series NVRs
Motion Alarm Handling
and
Alarm Out Settings
. Please see Chapter 9 AI Event Management and Chapter 11 General Event Management for details.
Ø
Disk
This module covers
Disk Management
,
Storage Mode
and
Disk Information
. Please see
Chapter 7 Record & Disk Management for details.
Ø
Network
This module covers the functions
TCP/IP
,
DDNS
,
Port
,
and
Network Status
. Please see
13.1 Network Configuration for details.
Ø
Account and Authority
This module covers the functions
Account Management
(see 12.1 Account Management for details) and
Permission Management
(see 12.3 Permission Management for details).
Ø
System
This module covers
Basic Configuration
(see 13.2 Basic Configuration for details),
Device
Information
(see 13.8 View System Information for details),
Log Information
(see 13.7 View
Log for details) and
Configuration File Import&Export
(see 13.5 Backup and Restore for details)
Click the main menus on the top of the camera management interface to go to corresponding interfaces. Refer to the picture below. For instance, you can go to system setup interface by clicking “System” tag.
3.2.3 Main Functions
Ø
Camera
This module covers the functions such as
Camera Management
(see Chapter 4 Camera
Management for details),
Image Settings
(see 5.4 Preview Image Configuration for details),
Motion
(see 11.2 Motion Alarm for details), and
PTZ
(see Chapter 6 PTZ for details) and so on.
Ø
Record
This module covers the functions such as
Encode Parameters
and
Record Schedule
. Please see
Chapter 7 Record & Disk Management for details.
Ø
AI/Event
This module covers the functions
Smart Event, Combination Alarm, Exception, Sensor and
27 28
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 10 INTRODUCTION
- 21 BASIC OPERATION GUIDE
- 21 2.1.1 Startup
- 21 2.1.2 Shutdown
- 26 WIZARD & MAIN INTERFACE
- 32 3.2.1 Main Interface Introduction
- 35 3.2.2 Setup Panel
- 36 3.2.3 Main Functions
- 38 CAMERA MANAGEMENT
- 38 4.1.1 Add Camera
- 41 4.1.2 Edit Camera
- 42 4.2.1 Add Camera Group
- 43 4.2.2 Edit Camera Group
- 43 4.2.3 IP Planning
- 44 LIVE VIEW INTRODUCTION
- 45 5.2.1 Preview By Display Mode
- 47 5.2.2 Quick Sequence View
- 48 5.2.3 Camera Group View In Sequence
- 49 5.2.4 Scheme View In Sequence
- 53 5.4.1 OSD Settings
- 54 5.4.2 Image Settings
- 54 5.4.3 Mask Settings
- 55 5.4.4 Fisheye Settings
- 55 5.4.5 Image Adjustment
- 68 RECORD & DISK MANAGEMENT
- 68 7.1.1 Mode Configuration
- 70 7.1.2 Schedule Settings
- 73 7.1.3 Advanced Configuration
- 74 7.3.1 Manual Recording
- 74 7.3.2 Timing Recording
- 74 7.3.3 Motion Based Recording
- 74 7.3.4 Sensor Based Recording
- 74 7.3.5 AI Event Recording
- 75 7.4.1 Disk Management
- 78 7.4.2 Storage Mode Configuration
- 79 7.4.3 View Disk and S.M.A.R.T. Information
- 80 PLAYBACK & BACKUP
- 85 8.3.1 Smart Playback Settings
- 86 8.3.2 Smart Playback Based on Motion Detection
- 87 8.3.3 Smart Playback by Face Search
- 88 8.3.4 Smart Search by License Plate
- 89 8.4.1 Search, Playback & Backup by Time-sliced Image
- 91 8.4.2 Search, Playback & Backup by Time
- 92 8.4.3 Search, Playback & Backup by Event
- 93 8.4.4 Search & Playback by Tag
- 93 8.4.5 Image Management
- 94 8.4.6 View Backup Status
- 95 AI EVENT MANAGEMENT