All reset operation. Sharp OZ-5600

All reset operation

If the unit still fails to function after it has been reset using the procedure above, or you have forgotten the password to be entered in the start-up display, you will have to reset it using a slightly more complicated procedure:

1.

While pressing and holding ON , press and release the RESET switch.

ON

☞ •

Do not press Y in step 3. Doing so will delete all data in the unit.

•

However, if you have forgotten the password required at start-up, you have no choice but to press Y in order to use the unit, but losing all your data in the process.

A message appears.

2.

Release ON .

3.

Press N .

The built-in clock and any set daily alarms are reset.

197