advertisement
Q S I 5 0 0 S E R I E S U S E R G U I D E
SLR lens adapter
SLR lens adapters are available for the following lens mounts:
Canon EF (EOS)
Nikon
The SLR lens adapter provides the correct focal distance for specified le nses when threaded to the standard T-moun extension tubes or T-mount exten with slim or mid-size bodies. Mid require a 0.825” extension tube. t adapter on full-size “ws” model cameras. Standard ders should be used to achieve the correct focal distance
-size bodies will require a 0.5” extension tube. Slim bodies
Liquid heat excha nger
The liquid heat exchanger (LHX) provides additional cooling of the
CCD beyond what can be achieved using the standard air cooling.
The liquid heat exchanger attaches to the back of the QSI 500
Series camera us ing four screws. Refer to the camera sp ecifications to determine the temperature differential that can typically be maintained when using the LHX.
Recirculatin g pump
The recirculating pum p is used to pump water through the liquid heat exchanger.
Color filter wh eel
Cameras with an internal color filter wheel include one filter wheel and a standard set of LRGB filters. Additional color filter wheels can be ordered. With additional color filter wheels you can load a second set of filters, phot
such as narrowband filters or UVBRI ometric filters, and easily replace the entire filter wheel. See the Care & Maintenance section below for instructions on removing and insta lling the color filter wheel.
Guider Break out Box
The Guider Breakout B ox (GBOB) can be used to adapt the autoguider signals to older or non-standard mounts. the standard used by S
The autoguider signals output by the QSI 500 Series camera follow
BIG cameras and most modern mounts.
70
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 What’s In the Box?
- 6 Get to Know Your Camera
- 7 Install Software and Drivers
- 7 Launch MaxIm LE (if purchased with your camera)
- 8 Connect the camera
- 10 Take an image
- 11 View the image
- 12 Camera Attachment Options
- 13 Using SLR Lenses
- 13 Attach the camera to your telescope
- 14 Electrical Connections
- 14 DC Power Connector
- 15 USB Connector
- 16 Guider Control Port
- 17 Cooling the Camera
- 17 Standard Air Cooling
- 17 Liquid-Assisted Cooling
- 18 How Much Cooling Is Enough
- 19 Controlling the Cooler
- 21 Internal Color Filter Wheel
- 22 Advanced Setup Options
- 23 Camera Selection
- 24 Status Indicators
- 25 Imaging Options
- 26 Status and Notification
- 26 Camera Status Indication
- 26 Camera Error Indication
- 28 Audible Beeper
- 28 Imaging Application Messages
- 29 How CCDs work
- 29 Types of CCDs
- 29 Full-Frame CCDs
- 30 Interline Transfer CCDs
- 30 Anti-Blooming CCDs
- 31 Microlenses
- 31 Single-shot color CCDs
- 32 Signal versus noise
- 33 Reducing noise in CCD images
- 33 Dark Frames
- 35 Flat Fields
- 37 Bias Frames
- 38 Stacking Images
- 39 Color images
- 40 Launch MaxIm LE
- 41 Camera Control Window
- 43 Cool the CCD
- 44 Focusing with MaxIm LE
- 45 Take a single image
- 46 View the image in MaxIm LE
- 46 Take a series of images
- 48 Image Calibration
- 49 Dark Frames
- 49 Bias Frames
- 49 Flat Fields
- 50 Flat Darks
- 50 Manual Image Calibration
- 50 Subtract Dark Frames
- 52 Scale by Flat Fields
- 53 Automatic Calibration in MaxIm LE
- 57 Calibrate Images in MaxIm LE
- 58 Combine Frames in MaxIm LE
- 61 Binning
- 64 Using the internal Color Filter Wheel
- 65 Shutting down your camera
- 65 Controlling your camera with other software
- 66 Autoguider support in MaxIm LE
- 67 Using an AutoGuider
- 70 Using a QSI 500 Series Camera as an AutoGuider
- 72 T-mount adapter
- 72 2” nosepiece
- 72 1 ¼” nosepiece
- 72 C-mount adapter
- 73 SLR lens adapter
- 73 Liquid heat exchanger
- 73 Recirculating pump
- 73 Color filter wheel
- 73 Guider Breakout Box
- 74 Cleaning the exterior
- 74 Installing or removing color filters
- 75 Cleaning the color filters
- 75 Cleaning the CCD cover glass
- 75 Recharging the desiccant
- 76 Technical support
- 77 Appendix A – 500 Series Specifications
- 81 Appendix B – Warranty