Demo Print. Casio KL-7000, KL7000

Demo Print

Use one of the following procedures to produce a print that demostrates some of the features of the Label Printer. The procedure you should use depends on the size of the tape you are using.

To produce a demo print using tape other than 6mm

1. Press ON to switch power on.

2. Press PRINT.

3. Press SET.

To produce a demo print using 6mm tape

1. Holding down the 6 key, press ON to switch power on.

2. Press PRINT.

3. Press SET.

Important!

You can produce a demo print when the text input display is clear, immediately after switching power on only. Even if you input text and then delete it, pressing PRINT will not produce a demo print.

• If you experience problems with printing, check your tape cartridge and power supply, and try again.