advertisement
![To specify your own tape length. Casio KL-7000, KL7000 | Manualzz To specify your own tape length. Casio KL-7000, KL7000 | Manualzz](http://s1.manualzz.com/store/data/001154733_1-c752377a235905400e8a7f6043868177-360x466.png)
1. Input the text.
2. Press FORM to display the FORM menu.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
Yes
LENGTH
PITCH
FEED
BL SPACE
SET No ESC
3. Use K and L to highlight LENGTH, and press SET.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
Yes
VHS
8mm
CASSETTE
FLOPPY
SET No ESC
4. Use K and L the highlight CASSETTE.
5. Press SET to apply the setting and return to the text input screen.
• If the text you input is too long to fit within the tape length you specified, the error message TEXT DOES NOT FIT! appears on the display for about one second. When this happens, try making the characters smaller or inserting newline marks (see “To input alpha-numeric characters”) to make the text fit better on the tape.
A
A
A
A
To specify your own tape length
Example: To specify a tape length of 10cm for the text “ABXYZ Computer Company”.
1. Input the text.
2. Press FORM to display the FORM menu.
FUNC
SHIFT
CODE
LENGTH
PITCH
VERT
MIROR
OVER
CAPS
Yes
FEED
BL SPACE
SET No ESC
3. Use K and L to highlight LENGTH, and press SET.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
Yes
VHS
8mm
CASSETTE
FLOPPY
SET No ESC
4. Use K and L to highlight FREE, and press SET.
• Since there are six options on this menu, they do not all fit on a single screen. To view the two options at the bottom of the menu (FREE and CAN-
CEL), press L four times.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
T LENGTH
B LENGTH
Yes SET No ESC
5. Use K and L to select T-LENGTH and then press SET.
A
A
A
A
A
A
42
advertisement
Related manuals
advertisement
Table of contents
- 5 Getting Acquainted
- 5 Important Precautions
- 7 General Guide
- 9 Label Printer Menus
- 10 Getting Ready
- 10 Power Supply
- 10 Replacing Batteries
- 11 To replace the memoryback-up battery
- 11 To replace the main batteries
- 12 AC Adaptor
- 12 To connect the AC adaptor
- 12 Switching Power On and Off
- 12 Resetting the Memory
- 12 To reset the memory
- 13 Power On Recall Function
- 13 Auto Power Off Function
- 13 Tape Cartridges
- 13 To load a tape cartridge
- 15 To specify the tape width
- 16 Display Contrast
- 16 Sound Effects
- 16 switching power on
- 16 To switch sound effects on and off
- 17 Setting the message language
- 17 To set the message language
- 17 Setting the unit of measurement
- 18 Demo Print
- 18 other than 6mm
- 18 6mm tape
- 19 and Illustrations
- 19 Display Symbols and Indicators
- 21 Basic Alpha-Numeric Input
- 21 To input alpha-numeric characters
- 22 About the CODE key
- 22 To input special symbols
- 23 To input illustrations
- 24 Characters
- 24 Moving the Cursor
- 24 To move the cursor
- 24 Deleting Individual Characters
- 24 To delete characters using the BS key
- 25 To delete characters using the DEL key
- 25 Deleting a Series of Characters
- 25 To delete a series of characters
- 25 Using the CLS Function
- 25 To clear all text from the display
- 26 To clear specific text
- 26 Overwrite and Insert
- 26 Overwrite
- 27 Insert
- 27 To switch between overwrite and insert
- 28 Text Effects
- 28 Specifying Character Attributes
- 28 characters
- 29 of text
- 29 existing text
- 30 Changing Fonts
- 30 How to tell the current font settings
- 30 To change the font setting
- 31 Changing Character Styles
- 31 How to tell the current style settings
- 32 To change the style setting
- 33 Changing Character Size
- 33 About Auto Fit
- 33 About the FIT mark
- 34 How to tell the current size settings
- 34 To change the characters size
- 35 Assigning Text Effects
- 35 Changing Text Effects
- 35 To assign text effects
- 36 To remove text effects
- 38 FORM Menu Functions
- 38 Fundamentals of Label Layout
- 39 Creating and Deleting Blocks
- 39 To create a block
- 39 To delete a block mark
- 39 Character Pitch
- 39 To specify the character pitch
- 40 Block Length
- 40 To specify a block length
- 41 To cancel block length settings
- 42 Tape Length
- 42 To select a preset tape length
- 43 To specify your own tape length
- 44 To cancel a tape length setting
- 44 Auto Feed
- 45 To select a feed option
- 45 Block Spacing
- 45 To specify the block spacing
- 45 To specify vertical printing
- 46 Mirror Image
- 46 To specify mirror image
- 46 Text Alignment
- 47 To specify text alignment
- 48 Justification
- 48 To switch justification on and off
- 49 Quick Formats
- 50 To select a built-in format
- 51 To cancel a built-in format
- 52 Presets
- 52 Using the presets menu
- 52 Preset (Auto) Layouts
- 52 a label
- 54 preset layout
- 54 memory
- 57 Preset Phrases
- 57 To print a preset phrases
- 57 Numbering
- 57 To print a numbered series
- 59 Printing
- 59 Printing a Tape
- 59 To print a tape
- 60 To show the image display
- 60 To show the layout display
- 60 To feed tape
- 61 To adjust the print density
- 61 Frame Printing
- 61 of the printing area
- 63 Part 10 Memory
- 63 Storing Data
- 63 To store data into memory
- 63 Recalling Data
- 64 To recall data from memory
- 64 Deleting Text
- 65 To delete text from memory
- 66 Part 11 Reference
- 66 Cleaning the Printer Head and Roller
- 66 To clean the printer head and roller
- 67 Resetting
- 68 About the Label Printer’s Keys
- 70 Troubleshooting
- 72 Messages
- 73 Initial Settings
- 74 Symbols, Illustrations and Frames
- 75 Preset (Auto) Layouts
- 79 Application Examples
- 80 Specifications