2-3-17 T. Yamaha MX88, MOX6, CP40, MOXF6, MOXF8, CP4, MOX8Synthesizer, MX61, MOX8, MX49

Effects

Slow-Fast Time of

Horn

Slow-Fast Time of

Rotor

Space Type

Speaker Type

Speed

Speed Control

Spread

Stage

2-3-17 T

Threshold

Top

Determines how long it takes for the rotation speed of the horn to change from the current speed (slow or fast) to the other one (fast or slow) when the rotation speed is switched.

Determines how long it takes for the rotation speed of the rotor to change from the current speed (slow or fast) to another one (fast or slow) when the rotation speed is switched.

Selects the type of space simulation.

Selects the type of speaker simulation.

Determines a specific value, depending on the selected Effect type.

For VCM Flanger, this parameter determines the frequency of the LFO wave which controls the cyclic change of the delay modulation.

For Phaser, this parameter determines the frequency of the LFO wave which controls the cyclic change of the phase modulation.

For VCM Auto Wah, this parameter determines the speed of the LFO.

Switches the rotary speed.

Determines the spread of the sound.

Determines the step number of the phase shifter.

Type

Determines the minimum input level at which the effect is applied.

Determines the maximum value of the wah filter.

The Top parameter is available only when the value is more than that of the Bottom parameter.

Determines a specific value, depending on the selected Effect type.

For VCM Flanger, this parameter determines the flanger type.

For Wah effects, this parameter determines the type of the Auto Wah.

For Early Reflection, this parameter determines the type of the reflection sound.

2-3-18 V

Vocoder Attack

Vocoder Release

Determines the Attack Time of the Vocoder sound.

The higher the value, the slower the attack.

Determines the ReleaseTime of the Vocoder sound.

The higher the value, the slower the decay.

Selects a vowel type.

Vowel

2-3-19 W

Wall Vary

Width

Word Length

Determines the wall status of the simulated room.

Higher values produce more diffuse reflections.

Determines the width of the simulated room.

Determines the degree of sound roughness.

65