Selecting RUN/STOP Commands. YASKAWA Varispeed-606PC3, Varispeed V7 COMPACT GENERAL-PURPOSE INVERTER (VOLTAGE VECTOR CONTROL) FOR DeviceNet COMMUNICATIONS

† How to Select LOCAL/REMOTE Mode

When LOCAL/REMOTE switching function is not set for multi-function input selection

(When 17 is not set for any of constants n050 to n056)

When LOCAL/REMOTE switching function is set for multi-function input selection

(When 17 is set for any of constants n050 to n056)

Select Lo for operator

LO/RE selection.

Select rE for operator

LO/RE selection.

Turn ON multifunction input terminal.

Turn OFF multifunction input terminal.

136

LOCAL mode REMOTE mode

„ Selecting RUN/STOP Commands

Refer to Switching LOCAL/REMOTE Modes (page 135) to select either the LOCAL mode or REMOTE mode.

The operation method (RUN/STOP commands, FWD/REV RUN commands) can be selected using the following method.

† LOCAL Mode

When Lo (local mode) is selected for Digital Operator ON mode, or when the LOCAL/REMOTE switching function is set and the input terminals are turned ON, run operation is enabled by the

on the Digital Operator, and FWD/REV is enabled by the

ON mode (using or key).

or