advertisement
Parts and their functions
Rear panel
2 1
RS-
232C
MIC IN
REMOTE
1 2
75™
ON
1 2
OFF
9 10
ON
OFF
75™
3 4
75™
ON
3 4
OFF
CAMERA IN
5 6
ON
OFF
75™
75™
ON
5 6
OFF
11 12 13 14
ON
OFF
75™
IN
AUDIO
OUT
S-VIDEO
OUT
1 2
IN
GND
RESET OUT
ALARM
IN OUT
REC IN
EXT
TIMER
GND
WARNING
/REC OUT
EXT SW IN
/VIDEO OUT
TAPE END OUT
TIME ADJ IN
15 16
7 8
75™
ON
7 8
OFF
VIDEO OUT
GND
ON
OFF
75™
4
3
5 6 7 8 9
~ AC IN
:
1 CAMERA IN connectors 1 to qV (BNC),
75
Ω termination/loop through selector switches
1 to 8, 75 Ω termination switches 9 to qV
The camera and other external video input signals
(max. 16 inputs) are connected to these connectors.
To use these connectors, select REC TYPE as the
RECORDING T-MODE & CAMERA setting on menu screen P3.
<Note>
The 75
Ω termination/loop through selector switches
1 to 8 have 3 positions.
Switches 9 to qV have 2 positions, 75 Ω termination
ON and OFF.
2 RS-232C connector
This is used to connect a personal computer or other such device for controlling the unit.
3 MIC IN jack (M3)
This is used to connect the audio input signals from the microphone. (600
Ω impedance)
4 REMOTE connector
This is used to connect the model AG-A11 remote controller available as an optional accessory.
5 AUDIO connectors (pin jacks)
These are the audio input and output connectors.
When a microphone has been connected to the
MIC IN jack, the sound from this jack takes precedence in recording.
6 S-VIDEO OUT connector (4P)
This is used to connect the unit to a device equipped with an S-video input connector.
7 Terminal section
8 EXT SW IN/VIDEO OUT connector (BNC)
The same video signals are output as the signals from the VIDEO OUT connector 9. When EXT SW
IN is selected as the EXT SWITCHER MODE setting on menu screen P7, the connector can be made to serve as an input connector of the external switcher.
9 VIDEO OUT connector (BNC)
The video signals from the camera switched by the internal sequential switcher are output from this connector during recording.
During playback, the playback pictures of the recorded tape are output.
The menu screen or time adjustment screen is also displayed.
: AC IN socket
One end of the accessory power cord is connected to this socket, and the other end is connected to a household AC 120V power outlet.
10
advertisement
Related manuals
advertisement