advertisement
Setting menus
Menu page P4
[RECORDING MODE]
FIELD/FRAME
PICTURE QUALITY
REC-TYPE
[ALARM/SENSOR REC]
MODE
FIELD/FRAME
PICTURE QUALITY
DURATION
BUZZER
REPEAT
GROUP ALARM1
GROUP ALARM2
FIELD
HIGH
RT0 ( OFF¢16)
P4
OFF
FIELD
HIGH
0.5min
OFF
OFF
RT0 ( OFF¢16)
RT0 ( OFF¢16)
ALARM/SENSOR REC screen
Menu item Description of function
MODE
FIELD/FRAME
PICTURE
QUALITY
DURATION
BUZZER
For setting what recording operation is to be performed when an alarm signal has been input.
OFF : The unit operates normally regardless of whether an alarm signal is input.
ALARM/SENSOR:
Alarm recording or sensor recording is performed.
ALARM : Alarm recording is performed.
SENSOR: Sensor recording is performed.
For selecting field recording or frame recording when alarm recording or sensor recording is to be performed.
FIELD : Field recording is performed.
FRAME : Frame recording is performed.
For setting the picture quality when alarm recording or sensor recording is to be performed.
HIGH
NORMAL
: Recording is performed at a high quality.
: Recording is performed at the standard quality.
NO CHANGE : Recording is performed at the current quality setting.
For setting the length of the alarm recording or sensor recording.
0.5min
: Recording for 30 seconds.
1.0min
1.5min
: Recording for 1 minute.
: Recording for 1 minute and 30 seconds.
2.0min
3.0min
5.0min
10min
: Recording for 2 minutes.
: Recording for 3 minutes.
: Recording for 5 minutes.
: Recording for 10 minutes.
CONTINUE : Recording continues until the tape-end.
MANUAL : Recording is performed only while an alarm signal is input.
For setting whether the buzzer is to sound during alarm recording or sensor recording.
ON : The buzzer sounds. It stops when any one of the function buttons is pressed.
OFF : The buzzer does not sound.
REPEAT For setting whether alarm recording or sensor recording is to be performed if an alarm signal has been input while repeat recording is underway or while the tape is being rewound.
OFF : Alarm recording or sensor recording is not performed when the tape is being rewound.
If an alarm signal has been input even when tape rewinding is completed, alarm recording or sensor recording is performed.
ON : Alarm recording or sensor recording (or both) is forcibly performed even while the tape is being rewound.
GROUP ALARM1 For selecting the recording type from what was registered on menu page P3 when alarm recording or sensor recording is to be performed if an alarm signal is input to ALARM IN 1.
RT0—RT7
GROUP ALARM2 For selecting the recording type from what was registered on menu page P3 when alarm recording or sensor recording is to be performed if an alarm signal is input to ALARM IN 2.
RT0—RT7
The underlining indicates the factory mode setting.
<Note>
When RT7 has been selected as the REC-TYPE item setting, the
FIELD/FRAME item setting is overridden and frame recording is forcibly initiated.
44
advertisement
Related manuals
advertisement