- Computers & electronics
- Audio & home theatre
- Cassette players
- Panasonic
- AG-DTL1
- Installation instructions
advertisement
![Search playback (cue/review). Panasonic AG-DTL1 | Manualzz Search playback (cue/review). Panasonic AG-DTL1 | Manualzz](http://s1.manualzz.com/store/data/002026031_1-a460748241291d46373c84e21dc33316-360x466.png)
Useful functions
Search playback (cue/review)
1 2
Alarm search
(alarm recording section search)
1 5 2
“AS” lights.
<
COUNT
A S
2 1
6 5
∫
4
2
H
;
3
H
1
4 3
4 3
<
2 1
6 5
∫
4
H
2
;
3
H
1
4 3
4 3
3
1
Set the POWER switch to ON, and insert the cassette tape.
2
Press the PLAY button to start playback.
3
Press the FF button or REW button.
The unit performs search playback (cue or review) while the FF button or REW button is held down.
Normal playback is restored when the FF button or
REW button is released.
<Notes>
O
When search playback is performed with a tape which was frame-recorded using cameras No.13 to
16, the recorded images of all the cameras are mixed and output even if a particular camera is selected.
O
The picture will become quite blurred when search playback is performed for a tape which was fieldrecorded in the standard picture quality mode. This is normal and not indicative of malfunctioning.
4 3
1
Set the POWER switch to ON, and insert the cassette tape containing the alarm recording.
2
Press the COUNTER button to establish the counter display mode.
3
Press the SEARCH button.
Check that “AS” lights on the display tube and that the alarm search mode is established.
Press the SEARCH button again if “M” has lighted.
4
While the unit is in the stop, fast forward or rewind mode, press the REW or FF button.
The first alarm recording section is searched in the direction corresponding to the button pressed, and the unit is set to the still-picture playback mode.
5
To play back the section, press the PLAY button.
<Notes>
O
To release the alarm search mode, press the
SEARCH button again to clear “AS” from the display tube.
O
The alarm search function can be used to search for only those alarm recording sections which were recorded for more than 30 seconds in the 3-hour, 9hour, 12-hour, 18-hour or 24-hour recording time mode.
O
When the FF button or REW button is pressed during playback, search playback (cue or review) is initiated, and even when the button is released, search playback will continue if the unit is in the alarm search mode.
27
advertisement
Related manuals
advertisement
Table of contents
- 4 Features
- 5 Parts and their functions
- 5 Front panel
- 10 Rear panel
- 11 Performing initial settings
- 11 Setting the date and time
- 12 Simple time adjustment
- 13 Simple date and time adjustment
- 14 cameras
- 15 Setting the recording mode
- 17 Frame recording and field recording
- 18 Connections
- 20 Recording
- 21 Playback
- 21 Normal playback
- 21 Still-picture playback
- 22 Changing over the screen display
- 22 Changing over the screen during playback
- 22 display
- 22 Switching between the cameras
- 23 Useful functions
- 23 Memory stop
- 24 recording
- 26 recall
- 27 Search playback (cue/review)
- 27 Alarm search (alarm recording section search)
- 28 Time/date search
- 29 Internal timer recording
- 33 External timer recording
- 35 Terminal connections
- 35 Alarm recording connections
- 36 Tape-end output connections
- 36 connections
- 36 External timer input connections
- 37 Time setting connections
- 37 External timer input connections
- 38 Terminal signal levels
- 39 Setting menus
- 39 Setting method
- 40 TIME/DATE PRESET screen
- 40 REC LOCK screen
- 40 HOUR METER screen
- 41 DISPLAY screen
- 41 REC LOSS INDICATOR screen
- 42 DAYLIGHT SAVING screen
- 43 RECORDING T-MODE & CAMERA screen
- 43 RECORDING MODE screen
- 44 ALARM/SENSOR REC screen
- 45 VTR MODE SELECT screen
- 46 TAPE REMAIN screen
- 46 REC REVIEW screen
- 47 ERROR WARN BUZZER screen
- 47 REC WARNING screen
- 48 TERMINAL INPUT SELECT screen
- 48 TERMINAL OUTPUT SELECT screen
- 49 VIDEO OUT SEQUENCE screen
- 49 EXT SWITCHER screen
- 50 PROGRAM TIMER screen
- 50 INTERNAL WEEKLY TIMER screen
- 51 FREE SET TIMER screen
- 52 RS-232C PARAMETERS screen
- 52 USER ID REC screen
- 53 RS-232C interface
- 53 1. Hardware specifications
- 53 (1) Interface specifications
- 53 (2) Communication parameters
- 54 2. Software specifications
- 54 (1) External interface specifications
- 54 (2) Transmitting format (PC 5 unit)
- 55 (3) Receiving format (unit 5 PC)
- 56 (4) List of commands
- 102 Error messages
- 103 Video head cleaning
- 103 Condensation
- 103 Maintenance
- 104 Specifications
- 110 Caractéristiques
- 111 Les commandes et leurs fonctions
- 111 Panneau avant
- 116 Panneau arrière
- 117 Réglages initiaux
- 117 Réglage de la date et de l’heure
- 118 Ajustement simplifié de l’heure
- 119 Ajustement simplifié de la date et de l’heure
- 120 nombre de caméras
- 121 Réglage du mode d’enregistrement
- 123 enregistrement de trames
- 124 Raccordements
- 126 Enregistrement
- 127 Lecture
- 127 Lecture normale
- 127 Arrêt sur image
- 128 Commutation de l’affichage à l’écran
- 128 lecture
- 128 4 écrans
- 128 Commutation des caméras
- 129 Fonctions utiles
- 129 Arrêt mémorisé
- 130 (urgence)
- 132 des pannes d’alimentation en mémoire
- 133 Lecture de repérage (repérage/révision)
- 133 sur signal d’alarme)
- 134 Repérage d’heure/date
- 135 Enregistrement par minuterie interne
- 139 Enregistrement par minuterie externe
- 141 Raccordement des bornes
- 141 signal d’alarme
- 142 ruban
- 142 d’enregistrement
- 142 Raccordements d’entrée de minuterie externe
- 143 Raccordements de réglage des heures
- 143 Raccordements d’entrée de minuterie externe
- 144 Niveaux de signal aux bornes
- 145 Réglage des menus
- 145 Méthode de réglage
- 146 Ecran TIME/DATE PRESET
- 146 Ecran REC LOCK
- 146 Ecran HOUR METER
- 147 Ecran DISPLAY
- 147 Ecran REC LOSS INDICATOR
- 148 Ecran DAYLIGHT SAVING
- 149 Ecran RECORDING T-MODE & CAMERA
- 149 Ecran RECORDING MODE
- 150 Ecran ALARM SENSOR REC
- 151 Ecran VTR MODE SELECT
- 152 Ecran TAPE REMAIN
- 152 Ecran REC REVIEW
- 153 Ecran ERROR WARN BUZZER
- 153 Ecran REC WARNING
- 154 Ecran TERMINAL INPUT SELECT
- 154 Ecran TERMINAL OUTPUT SELECT
- 155 Ecran VIDEO OUT SEQUENCE
- 155 Ecran EXT SWITCHER
- 156 Ecran PROGRAM TIMER
- 156 Ecran INTERNAL WEEKLY TIMER
- 157 Ecran FREE SET TIMER
- 158 Ecran RS-232C PARAMETERS
- 158 Ecran USER ID REC
- 159 RS-232C
- 159 1. Spécifications “matériel
- 159 (1) Spécifications d’interface
- 159 (2) Paramètres de communication
- 160 2. Spécifications “logiciel
- 160 (1) Spécifications du logiciel externe
- 160 (2) Format de transmission (PC 5 appareil)
- 161 (3) Format de réception (appareil 5 PC)
- 162 (4) Liste des commandes
- 208 Messages d’erreur
- 209 Nettoyage du cylindre des têtes
- 209 Condensation
- 209 Entretien
- 210 Données techniques