advertisement
Useful functions
Alarm memory recall and power loss memory recall
Alarm memory recall is a function for storing in the memory those dates/times and number of occasions on which the alarm recording and sensor recording functions were activated.
Power loss memory recall is a function for storing in the memory those dates/times and number of occasions on which the primary power supply was shut off due to a power outage, etc.
1 2 RESET button
The following display appears when alarm recording was never performed or when the primary power supply was never shut off.
[ALARM RECALL]
¢¢ ¢¢
–¢¢–¢¢¢¢
¢¢
:¢¢
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
¢¢ ¢¢
–¢¢–¢¢¢¢
¢¢
:¢¢
¢¢ ¢¢
–¢¢–¢¢¢¢
¢¢
:¢¢
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
¢¢ ¢¢
–¢¢–¢¢¢¢
¢¢
:¢¢
[POWER LOSS MEMORY]
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
¢¢ ¢¢
–¢¢–¢¢¢¢
¢¢
:¢¢
¢¢ ¢¢
–¢¢–¢¢¢¢
¢¢
:¢¢
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
2 1
6 5
∫
4
H
2
;
3
H
1
4 3
4 3
<
1
Set the POWER switch to ON.
2
Set the PROGRAM switch to the MENU position while holding down the STOP button.
The ALARM RECALL screen and POWER LOSS
MEMORY screen now appear.
The alarm number/s and dates/times when the alarm signal was input are displayed on the
ALARM RECALL screen.
The number of times the primary power source has been shut off and the dates/times when this happened are displayed on the POWER LOSS
MEMORY screen.
(Data is displayed in sequence with the latest at the top of the screen.)
[ALARM RECALL]
29 12 – 30 – 2000
28 12 – 04 – 2000
27 10 – 25 – 2000
26 9 – 10 – 2000
25
24
8 – 11 – 2000
5 – 10 – 2000
23
22
4 – 11 – 2000
3 – 10 – 2000
3:15
12:10
2:20
2:30
6:55
3:22
6:55
3:22
[POWER LOSS MEMORY]
14 12 – 01 – 2000
13 10 – 05 – 2000
12 08 – 10 – 2000
11 3 – 02 – 2000
12:00
10:30
9:20
7:00
<Notes>
O
Data for up to 8 alarms is stored on the ALARM
RECALL screen whereas data for up to 4 power losses is stored on the POWER LOSS MEMORY screen.
O
A total of 99 alarms and 99 power losses are stored in the memory.
When 99 is exceeded, the count returns to “00.”
O
As with alarm recordings, the sensor recordings are stored as alarm memory data.
O
The alarm memory data and power loss memory data are stored in the memory circuit inside the unit.
They are not recorded on the tape.
O
When the PROGRAM switch is set to any position except MENU, the ALARM RECALL screen and
POWER LOSS MEMORY screen displays are cleared.
O
When the RESET button is pressed while the
ALARM RECALL screen is displayed, the memory can be cleared, but the POWER LOSS MEMORY screen is not cleared.
[ALARM RECALL]
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
¢¢ ¢¢
–¢¢–¢¢¢¢
¢¢
:¢¢
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
¢¢ ¢¢
–¢¢–¢¢¢¢
¢¢
:¢¢
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
¢¢ ¢¢ –¢¢–¢¢¢¢ ¢¢ :¢¢
[POWER LOSS MEMORY]
14 12 – 01 – 2000
13
12
11
10 – 05 – 2000
08 – 10 – 2000
3 – 02 – 2000
12:00
10:30
9:20
7:00
26
advertisement
Related manuals
advertisement