advertisement
Support for braille displays
You can use a Bluetooth braille display to read VoiceOver output, and you can use a braille display with input keys and other controls to control iPod touch when VoiceOver is turned on.
For a list of supported braille displays, see www.apple.com/accessibility/ios/braille-display.html
.
Connect a braille display. Turn on the display, then go to Settings > General > Bluetooth and turn on Bluetooth. Then go to Settings > General > Accessibility > VoiceOver > Braille and choose the display.
Adjust Braille settings. Go to Settings > General > Accessibility > VoiceOver > Braille, where you can:
•
•
•
•
•
•
•
Turn on contracted braille
Turn off automatic braille translation
Turn off eight-dot braille
Turn on the status cell and choose its location
Turn on Nemeth code for equations
Display the onscreen keyboard
Change the braille translation from Unified English
For information about common braille commands for VoiceOver navigation and information specific to certain displays, see support.apple.com/kb/HT4400 .
The braille display uses the language that’s set for Voice Control.This is normally the language set for iPod touch in Settings > International > Language. You can use the VoiceOver language setting to set a different language for VoiceOver and braille displays.
Set the language for VoiceOver. Go to Settings > General > International > Voice Control.
If you change the language for iPod touch, you may need to reset the language for VoiceOver and your braille display.
You can set the leftmost or rightmost cell of your braille display to provide system status and other information. For example:
•
•
•
•
•
•
•
•
Announcement History contains an unread message
The current Announcement History message hasn’t been read
VoiceOver speech is muted
The iPod touch battery is low (less than 20% charge) iPod touch is in landscape orientation
The screen display is turned off
The current line contains additional text to the left
The current line contains additional text to the right
Set the leftmost or rightmost cell to display status information. Go to Settings > General >
Accessibility > VoiceOver > Braille > Status Cell and tap Left or Right.
See an expanded description of the status cell. On your braille display, press the status cell’s router button.
Siri
With Siri, you can do things like opening apps just by asking, and VoiceOver can read Siri
responses to you. See Chapter 4, Siri , on page 36.
Appendix A Accessibility 122
advertisement
Related manuals
advertisement