advertisement
Duplicating a video tape/Duplicating a disc material onto a video tape
Duplicating a video tape
If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
1
Load a blank cassette tape with the erase prevention tab intact into the recording VCR.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
4
Press REC on the recording VCR or on the Remote.
While holding REC, press PLAY.
Then press PAUSE.
2
Press SP/EP to select the desired tape speed SP or EP.
It is recommended that you set the speed to the
SP mode on the recording VCR for best results.
5
Press PLAY button on the playback VCR or
CAMCORDER, then press PAUSE button.
6
Press PAUSE on both the VCRs simultaneously to begin the duplicating process.
3
Press VCR CH + or – to select AUDIO/VIDEO input position. “L” will appear in the display.
Connection with second VCR
Playback VCR
Connection with Camcorder
Playback Camcorder
To AV Jack
To VIDEO OUT To AUDIO (R) OUT
To AUDIO (L) OUT
AUDIO/VIDEO cable (supplied)
Recording VCR
Recording VCR
To VIDEO IN To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
To AUDIO (R) IN
To AUDIO (L) IN
AUDIO/VIDEO cable (not supplied)
For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.
Duplicating a disc material onto a video tape
You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.
If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark “ ” will appear on the screen for approx. 4 seconds. See page 37 for more information about the DVD playback.
Preparation:
• Load a cassette tape with the erase prevention tab
•
• intact.
Select the tape speed (SP or EP) in the VCR mode.
Load a disc you wish to duplicate.
3
During disc playback, press REC on the VCR or while holding REC, press PLAY on the Remote.
The duplicating will start.
1
Press DVD to select the DVD mode. (The DVD indicator will light.)
NOTE:
You can set the duplicating time using the ITR-function.
At step 3 above press REC repeatedly until the desired duplicating time appears on the screen (see page 30).
2
Press PLAY to start the disc playback.
34
2C50801AE(34-39) 34 7/10/03, 10:38
Disc
The following types of discs can be played on this unit.
Disc type and logo mark
DVD Video
Video CD
Audio CD
Recorded content
Audio
+
Video
Audio
Disc size
5 inches
(12 cm)
3 inches
(8 cm)
5 inches
(12 cm)
3 inches
(8 cm)
5 inches
(12 cm)
3 inches
(8 cm)
5 inches
(12 cm)
CD-R/CD-RW
Recordable CD-DA/JPEG/
MP3/WMA file
3 inches
(8 cm)
ReWritable
• This unit can play back FUJICOLOR
CD and Kodak Picture CD formats.
• DVD-ROM, SVCD, CVD, Photo CD, etc. cannot be played.
• Some CD-R/RWs can not be played back depending on the recording conditions.
• This unit is to be used exclusively with the NTSC color system. PAL and
SECAM system discs cannot be used with this unit.
Region Number
Region number (Regional restriction code) is built-in to the unit and DVD video discs.
Region number “1” or “ALL” of DVD video discs can be used on this unit.
1
Title
When two or more movies are recorded on a disc, the disc is divided into two or more sections.
Each section is called a “TITLE”.
Chapter
The titles can be subdivided into many sections.
Each section is called a “CHAPTER”.
Video CD/Audio CD Track
A Video CD or Audio CD can contain several items.
These are assigned to the tracks.
DVD DISC
TITLE1
CHAPTER 1 CHAPTER 2 CHAPTER 1
TITLE2
CHAPTER 2 CHAPTER 3
TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5
Removing Disc from Case
Be sure to hold the edge of disc. Do not touch the surface of the disc.
Pick up the disc gently from the case.
• Do not scratch the disc.
• Do not get dirt on the surface of the disc.
• Do not stick a label or adhesive tape on the disc.
• Do not drop or bend the disc.
Storing Disc
• Store the disc in the case to avoid risk of scratches, dirt or damage.
• Do not leave disc exposed to direct sunlight or in hot or humid places.
Cleaning Disc
Wipe the disc with a clean, dry cloth from center to edge.
• Do not wipe the disc round.
• Do not use liquid or aerosol cleaners.
35
2C50801AE(34-39) 35 7/10/03, 10:38
advertisement
Related manuals
advertisement
Table of contents
- 4 Features
- 5 Contents
- 6 Parts and functions
- 7 Display
- 8 Remote control
- 10 TV multi-brand remote control
- 11 Control four JVC VCRs
- 12 Basic connections
- 14 CATV (CABLE TV) connections
- 16 Playback connections
- 18 Setting the video channel
- 18 Setting the language
- 19 Tuner setting
- 20 To ADD/DELETE channels
- 20 Noise elimination
- 21 Auto clock setting
- 23 Manual clock setting
- 24 Loading and Unloading a cassette tape
- 25 Cassette tape playback
- 26 Special playback
- 27 ZERO RETURN function
- 27 Video Index Search system
- 28 Recording a TV program
- 30 Instant Timer Recording (ITR)
- 31 Timer recording
- 33 Stereo recording and playback
- 33 Second Audio Program (SAP)
- 34 Duplicating a video tape
- 34 Duplicating a disc material onto a video tape
- 36 Setting setup language
- 37 Playback procedure
- 38 Special playback
- 39 Zooming
- 39 Locating desired scene
- 40 Repeat playback
- 41 Program playback (CD)
- 41 Random playback (CD)
- 42 MP3/WMA/JPEG playback
- 44 Setting the JPEG Interval
- 45 Setting the Select Files
- 46 Zooming (JPEG CD)
- 46 Changing angles (JPEG CD)
- 47 Marking desired scenes
- 48 Changing soundtrack language
- 48 Karaoke playback
- 49 Subtitles
- 49 Changing angles
- 49 Title selection
- 49 DVD menu
- 50 Parental control
- 52 Setting menu language
- 53 Setting subtitle language
- 54 Setting audio soundtrack language
- 54 Setting surround sound
- 55 Setting the aspect ratio of TV screen
- 56 Setting on screen display
- 56 Status display of disc
- 57 Dynamic Range Control
- 58 Language code list
- 59 Problems and troubleshooting
- 60 Video head cleaning
- 61 Specifications