advertisement
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
Marking desired scenes
Preparation:
• Turn ON the TV and set it to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light.)
Marking the scenes
1
Press MARKER during playback.
Marker
Marker
1
2
Marker 3
/Enter/Cancel/Marker
2 Select the blank Marker using
/ .
Then press ENTER at the desired scene.
Marker
Marker
1
2
00
Marker 3
/Enter/Cancel/Marker
27 54
• Repeat this procedure to set the other 2 scenes.
3
Press MARKER to remove this display.
Returning to the scenes
1
Press MARKER during playback or stop mode.
Marker
Marker
1
2
00
01
02
27
16
Marker 3 08
/Enter/Cancel/Marker
54
25
31
2
Press / to select the Marker
1-3.
Marker
Marker
1
2
00
01
02
27
16
Marker 3 08
/Enter/Cancel/Marker
54
25
31
3
Press ENTER.
Playback starts from the marked scene.
NOTES:
• Some discs may not work with the
• marking operation.
The marking is canceled when you
• open the disc tray or turn the power off.
Some subtitles recorded around the marker may fail to appear.
To cancel the mark
1
Press MARKER.
2
Press / to select the Marker 1-3.
3
Press CANCEL.
To remove this display, press MARKER.
47
2C50801AE(46-49) 47 7/10/03, 10:38
advertisement