advertisement
3.3.2 PLANET Smart Discovery Utility
For easily list the PoE Injector Hub in your Ethernet environment, the Planet Smart Discovery Utility from user’s manual
CD-ROM is an ideal solution.
The following install instructions guiding you for run the Planet Smart Discovery Utility.
1. Deposit the Planet Smart Discovery Utility in administrator PC.
2. Run this utility and the following screen appears.
Figure 3-3 Planet Smart Discovery Utility Screen
If there are two LAN cards or above in the same administrator PC, choose different LAN card by use the
“Select Adapter” tool.
Figure 3-4 Planet Smart Discovery Utility Screen
13
4. This utility show all necessary information from the devices, such as MAC Address, Device Name, firmware version,
Device IP Subnet address, also can assign new password, IP Subnet address and description for the devices.
5. After setup completed, press “Update Device”, “Update Multi” or “Update All” button to take affect. The meaning of the 3 buttons above are shown as below:
Update Device: use current setting on one single device.
Update Multi: use current setting on choose multi-devices.
Update All: use current setting on whole devices in the list.
The same functions mentioned above also can be finding in “Option” tools bar.
6. To click the “Control Packet Force Broadcast” function, it can allow assign new setting value to the PoE Injector Hub under different IP subnet address.
7. Press Figure 3-2 .
8. Press “Exit” button to shutdown the planet Smart Discovery Utility.
14
advertisement
Related manuals
advertisement
Table of contents
- 4 1. INTRODUCTION
- 8 2. INSTALLATION
- 8 2.1.1 Injector Front Panel
- 9 2.1.2 LED Indicators
- 9 2.1.3 Injector Rear Panel
- 10 2.2.1 Desktop Installation
- 11 2.2.2 Rack Mounting
- 12 2.2.3 Network Application Installation
- 13 2.2.4 Power over Ethernet Powered Device
- 14 3 MANAGEMENT
- 14 3.3.1 Web Management
- 16 3.3.2 PLANET Smart Discovery Utility
- 18 4 WEB CONFIGURATION
- 20 4.3.1 System Information
- 20 4.3.2 IP Configuration
- 21 4.3.3 Password Setting
- 24 4.5.1 System Reboot
- 25 4.5.2 Configuration Setting
- 27 4.5.3 Alert Trap Configuration
- 28 4.5.4 Firmware Upgrade
- 31 5. POWER OVER ETHERNET OVERVIEW
- 33 6. THE POE PROVISION PROCESS
- 35 7 TROUBLESHOOTING
- 36 APPENDIX A
- 39 APPENDIX B