advertisement
![4.5.3 Alert Trap Configuration. Planet POE-2400, POE-1200 | Manualzz 4.5.3 Alert Trap Configuration. Planet POE-2400, POE-1200 | Manualzz](http://s1.manualzz.com/store/data/003392338_1-b3c95b72887b90b2f7e2b26bb9163a60-360x466.png)
4.5.3 Alert Trap Configuration
This function displays the PoE Injector Hub alert trap configuration; include “enable” or “disable” the trap mode and set the alert IP address. As showed in Figure 4-16.
Object
Trap mode
Alert IP address
Trap event
Figure 4.16 Alert Trap Configuration screen
Description
Can choose enable/disable to get the trap
Asign one IP address of host to get SNMP trap
Can choose which event can send the SNMP trap. The trap events include:
PoE SNMP Trap event
•
PoE Port On
• PoE AC Disconnect Port Off
• PoE DC Disconnect Port Off
• PoE Overload Port Off
• PoE Short Circuit Port Off
PoE port is supplying the power to the PD
PoE port was turned off, due to AC Disconnect function
PoE port was turned off, due to DC Disconnect function
PoE port off due to overload event
PoE port off due to short circuit event
24
advertisement
Related manuals
advertisement
Table of contents
- 4 1. INTRODUCTION
- 8 2. INSTALLATION
- 8 2.1.1 Injector Front Panel
- 9 2.1.2 LED Indicators
- 9 2.1.3 Injector Rear Panel
- 10 2.2.1 Desktop Installation
- 11 2.2.2 Rack Mounting
- 12 2.2.3 Network Application Installation
- 13 2.2.4 Power over Ethernet Powered Device
- 14 3 MANAGEMENT
- 14 3.3.1 Web Management
- 16 3.3.2 PLANET Smart Discovery Utility
- 18 4 WEB CONFIGURATION
- 20 4.3.1 System Information
- 20 4.3.2 IP Configuration
- 21 4.3.3 Password Setting
- 24 4.5.1 System Reboot
- 25 4.5.2 Configuration Setting
- 27 4.5.3 Alert Trap Configuration
- 28 4.5.4 Firmware Upgrade
- 31 5. POWER OVER ETHERNET OVERVIEW
- 33 6. THE POE PROVISION PROCESS
- 35 7 TROUBLESHOOTING
- 36 APPENDIX A
- 39 APPENDIX B