advertisement
![4.3.1 System Information. Planet POE-2400, POE-1200 | Manualzz 4.3.1 System Information. Planet POE-2400, POE-1200 | Manualzz](http://s1.manualzz.com/store/data/003392338_1-b3c95b72887b90b2f7e2b26bb9163a60-360x466.png)
4.3.1 System Information
The System information allows viewing system MAC Address, Software Version, Hardware Version, IP Address, Subnet
Mask and Gateway.. As showed in Figure 4.4
Figure 4-4 System Information screen
The page includes the following fields:
Object Description
MAC Address
Subnet Mask
Gateway
Specifies the PoE Injector Hub MAC address.
Software Version
IP Address
The current software version running on the PoE Injector Hub .
Hardware Version The current hardware version of the PoE Injector Hub.
The current IP Address of the PoE Injector Hub., t.
The current IP Subnet Mask value of the PoE Injector Hub..
The current Gateway value of the PoE Injector Hub..
4.3.2 IP Configuration
This section provides DHCP Client, change the IP Address, Subnet Mask, Gateway and Description, the screen in Figure
4-5 appears.
Figure 4-5 IP Configuration screen
17
advertisement
Related manuals
advertisement
Table of contents
- 4 1. INTRODUCTION
- 8 2. INSTALLATION
- 8 2.1.1 Injector Front Panel
- 9 2.1.2 LED Indicators
- 9 2.1.3 Injector Rear Panel
- 10 2.2.1 Desktop Installation
- 11 2.2.2 Rack Mounting
- 12 2.2.3 Network Application Installation
- 13 2.2.4 Power over Ethernet Powered Device
- 14 3 MANAGEMENT
- 14 3.3.1 Web Management
- 16 3.3.2 PLANET Smart Discovery Utility
- 18 4 WEB CONFIGURATION
- 20 4.3.1 System Information
- 20 4.3.2 IP Configuration
- 21 4.3.3 Password Setting
- 24 4.5.1 System Reboot
- 25 4.5.2 Configuration Setting
- 27 4.5.3 Alert Trap Configuration
- 28 4.5.4 Firmware Upgrade
- 31 5. POWER OVER ETHERNET OVERVIEW
- 33 6. THE POE PROVISION PROCESS
- 35 7 TROUBLESHOOTING
- 36 APPENDIX A
- 39 APPENDIX B