- Home
- Domestic appliances
- Climate control
- Split-system air conditioners
- Samsung
- AR24HVSDKWK
- User manual
advertisement
Combining On Timer and Off Timer
If the air conditioner is on If the air conditioner is off
Preset time on On timer is longer than Off timer
Ex) On timer : 3 hours, Off timer : 1 hour
- The air conditioner will operate the Off timer after
1 hour from the moment you have set the timer.
Your air conditioner will turn on after 2 hours.
Preset time on On timer is shorter than Off timer
Ex) On timer : 3 hours, Off timer : 5 hours
- The air conditioner will operate On timer after 3 hours from the moment you have set the timer.
Your air conditioner will remain on for 2 hours and then turn off automatically.
• On timer and Off timer setting time should be different from each other.
• Press the Set/Cancel button on the remote controller while timer combination is on.
Both of the On and Off timer will be canceled and the indicator will disappear.
Using the Auto Clean function
Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air.
Press the Auto Clean button.
When the air conditioner is turned off,
The Auto clean indicator on the indoor unit display appears and the Auto clean function runs.
(ARHVFN)
When the air conditioner is turned on,
After stopping the air conditioner operation , the Auto clean indicator on the indoor unit display appears and the Auto clean function runs.
(AR HVSS/HSSS )
Auto(cool), Cool, Dry mode : approximately 30 minutes.
Auto(heat
(ARHS)
), Heat
(ARHS)
, Fan mode : approximately 15 minutes.
Cancel Press the Auto clean button once again.
• During the auto clean function, indoor fan will continue to run and air flow blade will remain open to expel ambient air.
(ARHVSD)
�� A3050 CH&XL_IB&IM_DB68-04219A_HP&CO_EN.indd 21
English-21
2014/7/10 16:50:37
advertisement
Related manuals
advertisement
Table of contents
- 4 Safety precautions
- 10 Checking before use
- 12 Checking the name of the parts
- 13 Checking the remote controller
- 15 Basic function
- 17 Adjusting the air flow direction
- 18 Using the Fast function
- 18 Using the Comfort function
- 19 mode
- 20 Setting the On/Off timer
- 21 Using the Auto Clean function
- 22 Using the Single User function
- 22 Using the Virus Doctor function
- 23 Using the Quiet function
- 23 Using the Smart A/C application
- 23 Using the Filter reset
- 24 Cleaning the air conditioner
- 27 Maintaining the air conditioner
- 28 Troubleshooting
- 30 Safety precautions
- 31 Choosing the installation location
- 34 Accessories
- 36 Fixing the installation plate
- 37 Disassembling/Assembling the Cover panel for indoor unit installation
- 39 Connecting the assembly cable
- 41 Installing and connecting the assembly pipe of the indoor unit
- 42 Evacuating the indoor unit
- 42 Cutting or extending the pipe
- 44 Installing and connecting the drain hose of the indoor unit
- 45 Changing direction of the drain hose
- 46 Installing and connecting the drain hose of the outdoor unit
- 46 Evacuating the connected pipes
- 49 Performing the gas leak tests
- 50 Fixing the indoor unit in place
- 50 Fixing the outdoor unit in place
- 51 Smart Install mode
- 53 Final check and trial operation
- 53 Pump down procedure (when removing the product)
- 54 How to connect your extended power cables