Alphabetical parts list. HP 3600, 3600 n, CP3505 dtn, 3000, 3000 dtn, 3600 dn, 3600 dtn, 3800 n, 3800 dn, 3800 dtn

Below you will find brief information for Color LaserJet printer 3000, Color LaserJet printer 3000n, Color LaserJet printer 3000dn, Color LaserJet printer 3000dtn, Color LaserJet printer 3600, Color LaserJet printer 3600n, Color LaserJet printer 3600dn, Color LaserJet printer 3600dtn, Color LaserJet printer 3800, Color LaserJet printer 3800n, Color LaserJet printer 3800dn, Color LaserJet printer 3800dtn, Color LaserJet printer CP3505, Color LaserJet printer CP3505n, Color LaserJet printer CP3505dn, Color LaserJet printer CP3505dtn.

PDF

Document

Key features

Print speeds up to 24 pages per minute (ppm)
High-quality color printing
Automatic duplexing (duplex models)
Network connectivity (network models)
Easy-to-use control panel
HP Easy Printer Care Software
Embedded Web server

Frequently asked questions

Follow the instructions in the printer manual to replace the print cartridges.

Follow the instructions in the printer manual to clear the paper jam.

Follow the instructions in the printer manual to connect the printer to your network.

Follow the instructions in the printer manual to use the embedded Web server.

User questions

Patricia A.

How to troubleshoot memory failure issues with the device?

The viewed document does not contain specific troubleshooting steps for memory failures. However, it provides information on how to check DIMM installation and enabling memory, which might be helpful. If an error message appears after turning on the printer, it suggests that a DIMM might have been incorrectly installed. To ensure proper functionality: 1. Verify DIMM Installation: Follow the instructions in the manual to correctly install the memory DIMMs. 2. Enable Memory: After installing a memory DIMM, ensure that the printer driver recognizes the newly added memory. 3. Check DIMM Installation: Check that the DIMMs are installed correctly and working. If an error message appears, a DIMM might have been incorrectly installed.

John R.

How should the ETB attaching roller be cleaned, and what precautions should be taken?

Clean the ETB attaching roller using lint-free paper. If dirt is difficult to remove, the paper can be dampened with alcohol. Caution: Do not touch the ETB (Electrostatic Transfer Belt) itself with a damp cloth or your fingers to avoid potential damage.

Linda B.

How to remove and replace the developing separation-drive assembly?

Remove the upper cover, right cover, and fuser. Use a flatblade screwdriver to release the wire-guide locking tab and move it forward. Remove the sheet-metal plate (three screws), disconnect connectors J403 and J405 from the driver PCA, and remove the wire harnesses from the retainers. Finally, remove the three screws to release the assembly, ensuring the non-captive upper drive gear remains in place.