To begin a programming session. Nortel Compact Plus Release 4

Below you will find brief information for Norstar Compact Plus Release 4. This guide provides a quick reference to some of the more commonly-used features on your Norstar system. You can learn how to program individual extensions, assign lines to extensions, and set up features like speed dial and call forwarding. It also explains how to program restrictions and other system-wide settings, and how to move extensions. The guide will help you to get started with your new Norstar system.

PDF

Document

To begin a programming session

BASIC PASSWORD

This allows routine programming of individual extensions.

ACTION

1. Place the programming overlay on the extension. Refer to

"PROGRAMMING OVERLAYS" on page 1.

2. Press

≤.

VISUAL DISPLAY

1 Jan 1:00 am

Feature:

3. To programme the TIME code (time and date), enter

••°›ﬂ‹ (the TIME code), followed by

¤¤‡›¤. Using this example, the display shows:

Hour: 12:00

NEXT CHANGE

SYSTEM ADMINISTRATOR PASSWORD

This allows access to most of the settings for administration programming.

ACTION

1. Place the programming overlay on the extension. Refer to

"PROGRAMMING OVERLAYS" on page 1.

2. Press

≤.

VISUAL DISPLAY

1 Jan 1:00 am

Feature:

3. Using the keypad, enter the System Access code:

••¤ﬂﬂ‹››.

4. Enter your password:

¤‹ﬂ›ﬂ.

Press RETRY if you enter the password incorrectly.

Password:

Terminals&Extns

RETRY

Using either of the passwords described above, you can programme the system beginning with

“Terminals and Extensions” (Terminals&Extns). Press

Ô repeatedly to scroll through programme options including:

• Terminals&Extns

• Lines

• Services

• Sys Speed Dial

• Passwords

• Time & Date

• System prgrming

To b e g i n a p r o g r a m m i n g s e s s i o n

SYSTEM ADMINISTRATOR PLUS PASSWORD

This allows access to all administration settings as well as several installer settings.

ACTION

1. Place the programming overlay on the extension. Refer to

"PROGRAMMING OVERLAYS" on page 1.

2. Press

≤.

3. Using the keypad, enter the System Access code:

••¤ﬂﬂ‹››.

4. Enter your password:

‡¤‡ﬁ°‡.

Press RETRY if you enter the password incorrectly

VISUAL DISPLAY

1 Jan 1:00 am

Feature:

Password:

RETRY

Terminals&Extns

When you use the System Administrator Plus password, you can access all the programme options shown on the previous page, as well as the following:

• Software Keys

• Maintenance

• Using Metrics

ENDING A PROGRAMMING SESSION

ACTION

1. Press

®.

VISUAL DISPLAY

End of session

2. After a few seconds, the date and time reappear on the display.

1 Jan 1:00 am

PROGRAMMING MAP FOR PASSWORDS

Passwords ˆ Show

COS pswds

Show, Show pwd#

Call Log pswds

Show, Show extn#

Show, Log pswd

Progrming pswds

Hospitality

ˆ Next

SysAdmin+ (727587)

Next Sys admin (23646)

Next Basic (22742)

ˆ Show

Desk pswd 4677 (HOSP)

Next Cond None

Note:

The

symbol means ‘Press’. For example,

Press Show, Press Next, or Press Heading.

Hello! I am an AI chatbot specifically trained to assist you with the Nortel Compact Plus Release 4 Quick Programming Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Program individual extensions
Assign lines to extensions
Program Speed Dial
Program Call Forward
Program Restrictions
System-wide settings
Move extensions

Frequently asked questions

The System Administrator password is ¤‹fl›fl. The System Administrator Plus password is ‡¤‡fi°‡.

You can change the time and date on the system by pressing ≤ followed by ••°›ﬂ‹ (the Time and Date code), followed by ¤¤‡›¤ (the Basic password). Then press CHANGE, enter the new time, and press OK. To change the date, press NEXT, press CHANGE, and enter the new date.

To assign a restriction filter to an extension, begin a programming session using the System Administrator Plus password. Press , enter the extension number, press , press Ô four times, press , press Restrn filters, press Ô, press , press Filters, press , press CHANGE, and enter the filter number.