advertisement
Control Board
The Control Board offers several features: you can simply set the starting address, run the pre-programmed program or select a DMX channel mode.
Browse through the menu by pressing Mode. You can change the selection by pressing Up or Down. Press Enter in order to confirm. You can leave
MODE UP DOWN ENTER every mode by pressing Mode. The functions provided are listed in the following sections.
No. Menu level 1 Menu level 2 d 1
1 3 - C H d 5 1 2
Menu level 3 Description
Setting
2 5 - C H d 1 d 5 1 2
DMX channel mode (Slave mode)
DMX address setting
Default setting: 1
3 8 - C H d 1 d 5 1 2
4 C - -
C 1
C 2
C 3
C 4
C 5
C 6
C 7
Static colors
1：R
2：G
3：B
4：GB
5：RB
6：RG
5
6
7
8
9
10
11
P - -
S - -
S n d
S e n S
U - - d I M
S E T
P 1
P 2
P 3
P 4
S - - 1
S 1 0 0
S n d 1
S n d 2 u 0 u 1 0 0 r 0
2 5 5 g 0
2 5 5 b 0
2 5 5
O F F d I M 1 d I M 2 d I M 3
O n
O F F
7：RGB
Default setting: RGB
Internal programs (Master mode)
P 1：3 colors switching
P 2：3 colors fading
P 3：7 colors switching
P 4：7 colors fading
Default: P 1
Select the desired speed
S001 – S100 (increasing)
Default setting: 100
Sound controlled mode (Master mode)
Snd1：3 colors
Snd2：7 colors
Default: Snd1
Microphone sensitivity u000 – u100 (increasing)
Default setting：80
Dimmer intensity of LED colors
000 – 255 (increasing)
Default setting：255
Dimmer speed (step response)
Off : Response characteristics of LEDs
DIM 1: Response characteristics of halogen lamps, fast
DIM 2: Response characteristics of halogen lamps, middle
DIM 3: Response characteristics of halogen lamps, slow
Default setting: Off
Control via IR remote
Default setting: On
26/32 00080438.DOC, Version 1.1
advertisement