iPump 6400 User’s Manual
Figure 3.17: LCD menu navigation to Return Path screen
Return Path
Setup
Begin from the Return Path screen.To change the screens, see Editable Data Fields on page 20.
Step
1.
2.
3.
Press Displayed/Field Details
ENTER RETURN PATH SETUP
PRESS<ENTER>
ENTER MAIN SERVER IP
000.000.00.000
Select numbers using a valid IP address provided by your Network Control Administrator. Entering the wrong IP address here prohibits status information from being delivered to the network control system.
# Bkup SERVER IP
000.000.00.000
Select numbers until the Backup Server IP address is complete.
Screen Type
Menu
Editable
Editable
3.7 Optional Front Panel Screens
Your iPump 6400 may be configured for optional features including:
!"
Modem
!"
Genlock
!"
SMB access control
Navigation to
Modem Setup
Screen
Use the Modem setup for configuring dial-up settings in conjunction with an Internet service provider or a corporate e-mail server.
In addition to front panel operation, access this feature using your web browser. See
Modem Setup on page 42.
Use the front panel navigation buttons to go to the Modem screen as shown in Figure 3.18.
www.wegener.com
800009-01 Rev. J 33
