advertisement
![Back view. Oregon WR608 | Manualzz Back view. Oregon WR608 | Manualzz](http://s3.manualzz.com/store/data/025345673_1-ee61394037891f42871632167bbbc5e6-360x466.png)
BACK VIEW
1
2
3
4
5
6
1. Wall mount holes
2. EXT:external antenna jack
3. SP: external speaker jack
4. AC / DC adapter jack
5. Battery compartment
6. RESET: reset unit to default settings
GETTING STARTED
MAIN UNIT INSTALLATION
• Plug AC/DC adapter into socket. Make sure the adapter is not obstructed and is easily accessible to the unit.
To completely disconnect from power, the adapter should be disconnected from the main unit.
NOTE The main unit and adapter should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adapter.
Insert batteries:
1. Remove the battery compartment cover.
2. Insert the batteries, matching the polarities.
indicates battery is low.
NOTE Batteries should not be exposed to excessive heat such as sunshine or fire.
DISPLAY MODES
There are 2 display modes:
1. Clock mode
2. Radio status mode
CLOCK DISPLAY
To switch between the clock mode displays, press MENU.
Current time Alarm 1
4
advertisement
Related manuals
advertisement
Table of contents
- 3 Introduction
- 3 About the National Weather Radio System
- 3 Consumer Electronics Assoc. (CEA)
- 4 Product overview
- 4 Front view
- 5 Back view
- 5 Getting started
- 5 Main unit installation
- 5 Display modes
- 5 Clock display
- 6 Radio status display
- 6 Reception signal status
- 6 NOAA alert messages
- 6 Message codes used by the NWR
- 7 Set up radio to receive NOAA alert Messages
- 7 Finding local channels & SAME codes
- 8 Channels
- 8 About radio channels
- 8 Setting the radio channel
- 8 Locations
- 8 Setting the location
- 9 Activate / deactivate location
- 10 SAME code – What each digit means
- 10 Reception test
- 11 Reception problems and solutions
- 11 Many things affect reception!
- 11 Interpreting NOAA alert messages
- 15 Clock & calendar
- 15 Alarm
- 15 Radio volume
- 15 External speaker jack
- 15 Backlight
- 16 Reset system
- 16 Precautions
- 17 Specifications
- 17 About Oregon Scientific
- 17 FCC Statement
- 20 Introduction
- 20 Electroniques (CEA)
- 21 Description Générale
- 21 Vue avant
- 22 Vue arrière
- 22 Guide de démarrage
- 22 Installation de l’unité principale
- 22 Modes d’affichage
- 22 Affichage de l’heure
- 23 Affichage de l’etat de la radio
- 23 État du signal de réception
- 23 Messages d’alerte NOAA
- 23 Codes de message utilisés par NWR
- 24 messages d’alerte NOAA
- 24 codes SAME
- 25 Chaines
- 25 A propos des chaines radio
- 25 Réglage de la chaine radio
- 26 Emplacements
- 26 Réglage de l’emplacement
- 27 Activer / désactiver l’emplacement
- 27 Code SAME– Ce que chaque chiffre veut dire
- 28 Test de réception
- 29 Problèmes de réception et solutions
- 29 Les nombreuses choses affectent la réception!
- 29 Interprétation des messages d’alerte NOAA
- 33 Horloge & calendrier
- 33 Alarme
- 34 Volume radio
- 34 Prise de haut-parleur externe
- 34 Rétro-éclairage
- 34 Système de remise a zéro
- 34 Précautions
- 35 Spécifications
- 35 À propos d’Oregon Scientific