Messages regarding HP-GL/2. Canon IMAGEPROGRAF IPF840, imagePROGRAF iPF840 MFP M40

Canon imagePROGRAF iPF840 MFP M40 is a large format printer that offers a wide range of printing options, including printing CAD drawings, enlargements or reductions, and borderless printing. It also has the ability to print banners or at other non-standard sizes, and can tile and print multiple pages per sheet. Additionally, it can center originals and print photos and office documents. With its user-friendly interface and powerful features, the Canon imagePROGRAF iPF840 MFP M40 is the perfect choice for any business or individual who needs a high-quality large format printer.

This type of paper is not compatible with HP-GL/2.

iPF840

This type of paper is not compatible with HP-GL/2. ........................................................................................

654

GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) .......................................................................

654

GL2: W0502 The parameter is out of range. ...................................................................................................

654

GL2: W0504 This command is not supported. ...............................................................................................

654

Cause

The printer has received a HP-GL/2 print job that cannot be printed on the paper that has been advanced.

Corrective Action

Follow these steps to replace the type of paper in the printer.

Press ▲ or ▼ to select Change Paper , and then press the OK button.

Replace the paper with a type compatible with HP-GL/2. For details on paper compatible with HP-GL/2, refer to the Paper Reference Guide .

(See " Displaying the Paper Reference Guide .")

➔ P.335

Press ▲ or ▼ to select Stop Printing , and then press the OK button.

Press ▲ or ▼ to select Print , and then press the OK button to resume printing. However, note that this error may cause paper jams and affect the printing quality.

Cause

The printer memory is full.

Corrective Action

Because the entire print job could not be received, the printer may not be able to print the entire original.

Check the printing results.

In the Control Panel menu, setting On-the-Fly to On may enable printing. However, check the printing results because the image may be incomplete in some cases.

Cause

A parameter specified in a HP-GL/2 command is out of the supported range.

Corrective Action

Check the print job.

If you have specified ProcessingOption > Warning > On in the Control Panel menu, set it to Off instead.

Cause

The printer has received an unsupported HP-GL/2 command.

Corrective Action

Check the print job.

If you have specified ProcessingOption > Warning > On in the

Control Panel menu, set it to Off instead.

654